Indoor air quality in three small housing flats with different ventilation systems

1987 ◽  
Vol 18 (6) ◽  
pp. 701-704
Author(s):  
T Reponen ◽  
H Kokotti ◽  
T Savolainen ◽  
T Raunemae
2019 ◽  
Vol 11 (17) ◽  
pp. 4791
Author(s):  
Kwag ◽  
Park ◽  
Kim ◽  
Kim

Building air-tightness has been increased to make energy efficient buildings. However, various indoor air quality issues can be caused by high building air-tightness because it allows low air and moisture transmission through building envelop. In order to solve and prevent these issues, mechanical ventilation systems can be used to control the indoor humidity level. The purpose of this paper is to evaluate the performances of the Relative Humidity (RH)-sensor based auto-controlled centralized exhaust ventilation systems to manage indoor air quality and thermal comfort of multi-family residential buildings in South Korea. A series of field tests were performed for different target zones and for various moisture source scenarios. As a result, it was found that the auto-controlled centralized exhaust ventilation systems were able to control indoor air quality and to maintain the zones thermal comfort faster than the baseline cases that did not operate exhaust vents. The results presented in this paper can show the potential and the feasibility of the auto-controlled centralized exhaust ventilation systems for multi-family residential buildings in South Korea. It is expected that the results presented in this paper would be useful for building owners, engineers, and architects when designing building systems.


1989 ◽  
Vol 15 (1-6) ◽  
pp. 115-128 ◽  
Author(s):  
A. Hedge ◽  
T.D. Sterling ◽  
E.M. Sterling ◽  
C.W. Collett ◽  
D.A. Sterling ◽  
...  

Indoor Air ◽  
1991 ◽  
Vol 1 (4) ◽  
pp. 428-438 ◽  
Author(s):  
Risto Ruotsalainen ◽  
Jouni J.K. Jaakkola1 ◽  
Rauno Ronnberg ◽  
Antti Majanen ◽  
Olli Seppanen

2018 ◽  
Vol 18 (3) ◽  
pp. 422-435
Author(s):  
Ala'a A Mahdi ◽  
Sara Abbas

Computational Fluid Dynamics (CFD) of indoor environment as well as qualityconsiderations are important element in the study of energy consumption, thermal comfortand indoor air quality in buildings. This paper investigate a comparison work betweenimpinging jet, displacement, and mixing ventilation systems for an isothermal and nonisothermalventilated room for Indoor Air Quality (IAQ) and thermal human comfort underIraqi climate. For IJV system, draught discomfort is the issue of most concern since itsupplies cooled air directly to the occupied zone. This study investigated a number of factorsinfluencing draught discomfort and temperature stratification in an office environment. Theconsidered factors, supply airflow rate and supply air temperature. RNG K-? turbulencemodel was used with the turbulent flow. The second aspect included numerical analyses byadopting ANSYS FLUENT15 code to generate simulation models. A square shaped airsupply device was used with [0.1 times room height (h)] outlet terminal height from the footlevel end. The IJV system proved more efficient than displacement and mixing ventilationsystems. The Air Distribution Performance Index (ADPI) obtained for an isothermal andnon-isothermal ventilated room adopting IJV system gave best values (0.80, 0.83)respectively compared with the other two ventilation systems.


2019 ◽  
Vol 2019 ◽  
pp. 1-20 ◽  
Author(s):  
Marco Gola ◽  
Gaetano Settimo ◽  
Stefano Capolongo

Introduction. Indoor air quality is one the main issues in which governments are focusing. In healing spaces, several research studies are reporting a growing number of data analysis and research works in order to guarantee and prevent health of users and workers. Currently the main investigations are about biological and physical risks; otherwise chemical ones are less investigated. Several countries are carrying out indoor air quality monitoring in those professional workplaces in which chemicals are used but also in some typically indoor (generic) spaces for the building hygiene assessment. The indoor air is affected by several factors that currently are analyzed punctually, without a whole scenario of all the variable performances. The authors have done a systematic review on the current state of the art and knowledge related to chemical pollution in healing spaces and the emerging strategies, supported by scientific literature, for healthy inpatient rooms and their indoor air.Methodology. The systematic review has been done through the analysis of papers from SCOPUS, DOAJ, and PubMed databases. The survey sample considered 483 scientific articles, between 1989 and 2017, and starting the systematic reading and analysis of the abstracts, only 187 scientific papers were selected, and only 96 were accessible.Discussion. Since scientific literature reports very different outputs and results, the resulting work from the survey is divided into specific fields of interest related to construction and finishing materials, installations, components, ventilation systems, processes, etc. Starting from the systematic reading, the paper classifies the factors of indoor air in four macroareas: outdoor air and microclimatic factors (temperature, relative humidity, air velocity, air change, etc.); management activities (management and maintenance activities, ventilation systems, HVAC, cleaning and disinfectant activities, etc.); design factors (room dimensions, furniture, finishing materials, etc.); and human presence and medical activities (users’ presence, their health status, and medical activities carried out in inpatient rooms).Conclusion. The systematic review gives rise to a broad scenario on the existing knowledge regarding the indoor air pollution, design, and management strategies for healthy spaces and several emerging topics. Although the aim of the investigation is strictly related to chemical pollution, several considerations from the biological point of view have been listed. The systematic review, supported by the existing scientific literature, becomes a starting point for considering the importance of the topic and to stimulate the knowledge around this field of interest for improving studies, analysis, and simulations.


Sign in / Sign up

Export Citation Format

Share Document