Determination of crosslinking density of polymer networks by mechanical data in simple extension and by swelling degree at equilibrium

Polymer ◽  
1989 ◽  
Vol 30 (11) ◽  
pp. 2060-2062 ◽  
Author(s):  
Yong-Hua Zang ◽  
Rene Muller ◽  
Daniel Froelich
1967 ◽  
Vol 40 (4) ◽  
pp. 1071-1083 ◽  
Author(s):  
A. N. Gent

Abstract Changes in tensile stress afford a simple means of studying the rates of crystallization and the melting temperatures in crosslinked polymers subjected to simple extension. The form and magnitude of the stress changes in networks of trans-polychloroprene are closely similar to those observed for cis-1:4-polyisoprene and cis-l:4-polybutadiene networks. They are in accord with the formation of oriented crystallites and incompatible with folded chain crystallization at extensions as low as 15 per cent. It seems likely that the present networks do not crystallize by chain folding even in the unstretched state. The large increases in rate of crystallization with extension are approximately accounted for by corresponding increases in the equilibrium melting temperature. Direct measurements of the melting temperature show similar rises with extension. The rise in melting temperature is in good agreement with Flory's theoretical treatment of oriented crystallization at extension ratios of three and higher (when the crystallite orientation is complete) for three networks having different degrees of crosslinking. When referred to a constant segmental mobility, namely, that obtaining at Tg+50° C, the rates of crystallization at various extensions obey a common dependence upon the degree of supercooling. This relation is in fair accord with theories of nucleation kinetics, except at the lowest temperatures where there is some indication of the appearance of a new crystal form.


Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4057 ◽  
Author(s):  
Izabela Maria Barszczewska-Rybarek

Material characterization by the determination of relationships between structure and properties at different scales is essential for contemporary material engineering. This review article provides a summary of such studies on dimethacrylate polymer networks. These polymers serve as photocuring organic matrices in the composite dental restorative materials. The polymer network structure was discussed from the perspective of the following three aspects: the chemical structure, molecular structure (characterized by the degree of conversion and crosslink density (chemical as well as physical)), and supramolecular structure (characterized by the microgel agglomerate dimensions). Instrumental techniques and methodologies currently used for the determination of particular structural parameters were summarized. The influence of those parameters as well as the role of hydrogen bonding on basic mechanical properties of dimethacrylate polymer networks were finally demonstrated. Mechanical strength, modulus of elasticity, hardness, and impact resistance were discussed. The issue of the relationship between chemical structure and water sorption was also addressed.


2011 ◽  
Vol 1312 ◽  
Author(s):  
Carl P. Frick ◽  
Nishant Lakhera ◽  
Christopher M. Yakacki

ABSTRACTOur overall approach is based on developing a photocrosslinkable polymer network with a favorable shape-memory response, using polymer chemistry and crosslinking density to control thermo-mechanical properties. Three polymer networks were created and thermo-mechanically tested, each from tert-Butyl acrylate linear builder co-polymerized with a poly(ethylene glycol) dimethacrylate cross-linker. By systematically altering the molecular weight and the weight fraction of the cross-linker, it was possible to create three polymers that exhibited the same glass transition temperature, but varied by almost an order of magnitude in rubbery modulus. Therefore, the mechanical stiffness could be tailored to suit a given application. Recovery behavior of the polymers was characterized over a range of deformation temperatures. It has been implicitly assumed a linear relationship between Free-Strain (i.e. no actuation force) and Fixed-Stress (i.e. maximum actuation force), however, this has never been confirmed experimentally. The energy per unit volume performed by the shape-memory polymer was quantified, and observed to be a function of strain recovered. The maximum recoverable work was shown to increase with cross-linking density, although the overall efficiency is similar for all materials tested.


Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4157
Author(s):  
Liqian Zhu ◽  
Li Xu ◽  
Suyun Jie ◽  
Bogeng Li

Traditional crosslinked diene rubber has excellent thermal–mechanical properties and solvent resistance, yet it is incapable of being recycled via universal molding or injecting. Vitrimers, a new class of covalently crosslinked polymer networks, can be topologically rearranged with the associative exchange mechanism, endowing them with thermoplasticity. Introducing the concept of vitrimers into crosslinked networks for the recycling of rubbers is currently an attractive research topic. However, designing tailored rubber vitrimers still remains a challenge. Herein, polybutadiene (PB) vitrimers with different structures were prepared via partial epoxidation of double bonds and ring-opening esterification reactions. Their mechanical and relaxation properties were investigated. It was found that the increasing crosslinking density can increase tensile strength and activation energy for altering the network topology. The influence of side-group effects on their relaxation properties shows that an increase in the number of epoxy groups on the polybutadiene chain can increase the chance of an effective exchange of disulfide units. This work provides a simple network design which can tune vitrimer properties via altering the crosslinking density and side-group effects.


Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1322
Author(s):  
Boujioui ◽  
Gohy

Redox-active polymer networks based on stable nitroxide radicals are a very promising class of materials to be used in the so-called organic radical batteries. In order to obtain fast-charging and high power electrodes, however, excellent ionic conductivity inside the electrode material is required to allow easy diffusion of ions and fast redox reactions. In this contribution, we investigated redox-active poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) chains cross-linked through ionic liquid-like 1,2,3-triazolium groups. Different networks were prepared in which the amount of cross-linker and the counter-anion associated to the 1,2,3-triazolium group were varied. The ionic conductivities of the different polymer networks were first measured in the solid state by electrochemical impedance spectroscopy at different temperatures, and an increased ionic conductivity was measured when 1,2,3-triazolium groups were present in the network. The effects of the chemical nature of the counterions associated to the 1,2,3-triazolium groups and of the crosslinking density were then studied. The best ionic conductivities were obtained when bis (trifluoromethane)sulfonamide (TFSI) counter-anions were used, and when the crosslinking density of the TFSI-containing gel was higher. Finally, those ion-conducting gels were loaded with free LiTFSI and the transference number of lithium ions was accordingly measured. The good ionic conductivities and lithium ions transference numbers measured for the investigated redox-active gels make them ideal candidates for application as electrode materials for either organic radical batteries or pseudo-capacitors energy storage devices.


2021 ◽  
Author(s):  
Qing Zhou ◽  
Zhen Sang ◽  
Kartik Kumar Rajagopalan ◽  
Yelena Sliozberg ◽  
Frank Gardea ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document