Significance and behaviour of heavy metals in waste water treatment processes III. Speciation in waste waters and related complex matrices

1984 ◽  
Vol 34 (1-2) ◽  
pp. 117-141 ◽  
Author(s):  
R STERRITT ◽  
J LESTER
Author(s):  
Amita Jaiswal ◽  
Mahesh Chandra Chattopadhyaya

Water is the most important resource for all kinds of life on this earth. Water pollution is the contamination of water bodies (i.e. rivers, oceans, lakes, and ground water). Water pollution occurs when pollutants are directly or indirectly discharged into water bodies without treatment to remove harmful compounds. Water pollution and its treatment are interconnected to each other so it is not possible to explore one topic without the other. Today, all over world, people suffer from this problem so scientists and researchers are trying to solve these problems by different ways. There are many chemical and biological methods for water pollution treatment. This chapter deals with a brief introduction about water pollution, its types, main reasons that cause water pollution, and their effects on human health and environment, and it is mainly focused on the waste water treatment processes by bioremediation and chemical methods for removing heavy metals, pesticides, organic compounds, and dyes, which are mainly found in industrial and domestic waste water.


Author(s):  
Maria Y. Savostyanova ◽  
◽  
Lidia А. Norina ◽  
Arina V. Nikolaeva ◽  
◽  
...  

Retaining of water resources quality is one of the global ecological problems of the modern time. The most promising direction in solving the problem of water resources protection is the reduction of negative environmental influence of waste water from production facilities by upgrading the existing water treatment technologies. To treat utility water, technical and rain water from site facilities of Transneft system entities, the specialists developed and approved standard technological diagrams, which are used in producing treatment facilities. The standard technological diagrams provide for all necessary stages of waste water treatment ensures the reduction of pollution level to normal values. However, during operation of treatment facilities it was established, that to ensure the required quality of waste water treatment with initially high levels of pollution, the new technological solutions are necessary. The author presents the results of scientific-research work, in the context of which the best affordable technologies were identified in the area of the treatment of waste water with increased content of pollutants and non-uniform ingress pattern. On the basis of the research results the technical solutions were developed for optimization of operation of existing waste water treatment facilities by means of using combined treatment of technical and rain waters and utility waste waters and applying bioreactor with movable bed – biochips. The use of bioreactor with movable bed allows the increase in the area of active surface, which facilitates increase and retention of biomass. Biochips are completely immersed into waste waters, and biofilm is formed on the entire volume of immersion area, facilitating retention of biomass and preventing formation of sediments. Due to mixing the floating device with biofilm constantly moves along the whole area of bioreactor, and, in doing so, speeds up biochemical processes and uniformity of treatment. The advantages of a bioreactor with movable bed – its active sludge durability against increased and changing pollutant concentrations, change of waste water temperature and simplicity of application – ensured the possibility of its use for blending utility waters, technical and rain waters.


2007 ◽  
Vol 2 (1) ◽  
Author(s):  
D.A. Danilovich ◽  
M.N. Kozlov ◽  
V.I. Sklyar ◽  
Yu.A. Nikolaev ◽  
N.M. Shchegolkova ◽  
...  

This work demonstrates a possibility of composting of municipal waste waters sludge (WWS) digested during 5-7 days, of the Kuryanovo waste water treatment plants (the city of Moscow) without the use of traditional organic additives – sawdust, peat, thatch. As a recycling filler (repeatedly used), enhancing the porosity of the composted mixture, ribbed polyethylene spheres (∅=8 cm) and wood chips (having dimension of 5-10 cm) were used. Composting was performed efficiently in both cases, however, the use of wood ships had technological and economical advantages. The process of composting was carried out during 2-4 weeks and was composed of classical phases of active heating (a rate of 0.2-0.3oC/h was obtained), maintaining of maximum temperature during 1-2 days, and cooling down to the ambient temperature. During the course of composting, a product was obtained, having attractive organoleptic properties, suitable for application in municipal laying-out of greenery.


2014 ◽  
Vol 587-589 ◽  
pp. 692-695
Author(s):  
Wei Sun

Bio-absorption has an unparalleled advantage over other traditional methods in removing and recycling heavy metal ions from waste water. Consequently, it has a promising future. In this paper, the traditional methods and the bio-sorption method via which heavy metals are removed from waste water are compared to summarize the mechanism of bio-sorption, the types of bio-sorbent, the factors that can influence bio-sorption and the state of its application in waste water treatment .


Sign in / Sign up

Export Citation Format

Share Document