Bone pretreatments for radiocarbon dating: a study incorporating AMS dating and ion beam analysis

Author(s):  
Nicola A Redvers-Newton ◽  
G.E Coote
Radiocarbon ◽  
2010 ◽  
Vol 52 (2) ◽  
pp. 356-363 ◽  
Author(s):  
M E Fedi ◽  
L Carraresi ◽  
N Grassi ◽  
A Migliori ◽  
F Taccetti ◽  
...  

Ancient papyrus manuscripts are one of the most fascinating sources for reconstructing not only ancient life habits but also past literature. Recently, an amazing document has come to the fore due to the heated debates it raised: the so-called Artemidorus papyrus. It is a very long scroll (about 2.5 m) composed of several fragments of different sizes, with inscriptions and drawings on both sides. On the recto of the document, a text about geography and some drawings of heads, feet, and hands are present, while on the verso there are many sketches of animals, both real and fantastic. Its importance in classical studies comes from the fact that some scholars claim that it is the first known transcription of a relatively large fragment by the Greek geographer Artemidorus. However, other scholars think that the papyrus is a fake, drawn in the 19th century AD by a well-known forger. In order to overcome all possible ambiguities, the papyrus has been studied not only on the basis of historical and paleographic criteria but also by scientific techniques. We have contributed to the knowledge about the papyrus by radiocarbon dating the document and by analyzing the composition of the ink using ion beam analysis (IBA). Results are compatible with the scroll being an ancient manuscript: accelerator mass spectrometry (AMS) 14C measurements have dated the papyrus to a period between the 1st century BC and 1st century AD, while IBA measurements have pointed out the use of an organic (carbon-based) ink, which was typical of ancient Roman and Greek times. Details of the measurements are presented to emphasize the importance of combining AMS and IBA results.


2019 ◽  
Vol 297 ◽  
pp. 100-110 ◽  
Author(s):  
Nick Lucas ◽  
Kelsey E. Seyfang ◽  
Andrew Plummer ◽  
Michael Cook ◽  
K. Paul Kirkbride ◽  
...  

Instruments ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 10
Author(s):  
Sören Möller ◽  
Daniel Höschen ◽  
Sina Kurth ◽  
Gerwin Esser ◽  
Albert Hiller ◽  
...  

The analysis of material composition by ion-beam analysis (IBA) is becoming a standard method, similar to electron microscopy. A pool of IBA methods exists, from which the combination of particle-induced-X-ray emission (PIXE), particle induced gamma-ray analysis (PIGE), nuclear-reaction-analysis (NRA), and Rutherford-backscattering-spectrometry (RBS) provides the most complete analysis over the whole periodic table in a single measurement. Yet, for a highly resolved and accurate IBA analysis, a sophisticated technical setup is required integrating the detectors, beam optics, and sample arrangement. A new end-station developed and installed in Forschungszentrum Jülich provides these capabilities in combination with high sample throughput and result accuracy. Mechanical tolerances limit the device accuracy to 3% for RBS. Continuous pumping enables 5*10−8 mbar base pressure with vibration amplitudes < 0.1 µm. The beam optics achieves a demagnification of 24–34, suitable for µ-beam analysis. An in-vacuum manipulator enables scanning 50 × 50 mm² sample areas with 10 nm accuracy. The setup features the above-mentioned IBA detectors, enabling a broad range of analysis applications such as the operando analysis of batteries or the post-mortem analysis of plasma-exposed samples with up to 3000 discrete points per day. Custom apertures and energy resolutions down to 11 keV enable separation of Fe and Cr in RBS. This work presents the technical solutions together with the quantification of these challenges and their success in the form of a technical reference.


Author(s):  
P. Wei ◽  
M. Chicoine ◽  
S. Gujrathi ◽  
F. Schiettekatte ◽  
J.-N. Beaudry ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document