Achieving Green Building Standards via Energy Efficiency Retrofit: A Case Study of an Industrial Facility

Author(s):  
Muhsin Kılıç ◽  
Ayşe F. Altun
Author(s):  
Atanes Papoyan ◽  
Changhong Zhan ◽  
Xueying Han ◽  
Guanghao Li

Abstract In this article the research is concentrated on defining the possibility and potentials of design to enhance the energy efficiency and refine the climate conditions in the existing residential buildings in Armenia. The digital model of existing residential building is used to calculate the annual energy consumption, by simulation software—Autodesk Green Building Student. The horizontal solar panel systems offered by local market leaders were applied to calculate the annual savings, the required installation area, prices, etc. Consequently, the actual efficiency of energy saving technological process of residential buildings in Armenia is estimated. Based on the applied strategies and obtained fact, some recommendations are made for residential buildings. This article is intended to help and to be stimulus for architects and constructors to consider and include green technologies in their new projects.


2020 ◽  
Vol 31 (3) ◽  
pp. 602-623
Author(s):  
Thendo Masia ◽  
Kahilu Kajimo-Shakantu ◽  
Akintayo Opawole

PurposeGreen building is a relatively new concept with limited applications in property development in South Africa. The objectives of this study are therefore threefold: identify key green building principles considered by property developers, establish the benefits of implementing the principles and determine the barriers to its applications.Design/methodology/approachThe study adopted a case study of two Green Star South Africa (SA)-certified buildings in Sandton, Johannesburg. These are Alexander Forbes building, and Ernst & Young Eris Towers. The two certified buildings were purposefully selected because of the insightful information they provide regarding application of green building principles. The main themes investigated in the cases are environmental awareness, green building principles applications, as well as benefits and barriers of green building. A total of six interviewees from the contractors', property developers', environmental/green building consultants' and sustainability consultants' organizations who were involved in the implementation of green building principles in the two cases provided the qualitative data for the study. The qualitative data were supplemented with data relating to the two case studies obtained from the ‘Earth Works for a Sustainable Built Environment’. The interviews were arranged over a period of two months, and each interview took between 20 and 30 minutes. Analysis of the data was done through a phenomenological interpretation of the qualitative opinions expressed by the interviewees.FindingsKey green building principles comprising energy efficiency, water efficiency, resource efficiency, occupants' health and well-being and sustainable site development were implemented in the two cases. The fact that the buildings were rated 4-star enabled inference to be drawn that the implementation of the principles was less than 60 per cent. Energy efficiency of 35 per cent indicated in Case I suggests that the level is consistent with the South African green building standard of 25 per cent to 50 per cent. However, the energy and water efficiency assessment of the building were based on projections rather than on ongoing monitoring and evaluation of the buildings' performance. Moreover, perceived saving in operational cost was identified as dominant driver to green building principles implementation. Conversely, lack of government incentives and absence of reliable benchmarking data regarding performance of green buildings were major barriers to its full implementation.Practical implicationsThe findings of this study provide important implications to the developers and government on the application of green building principles. In the first place, the evidence that initial high cost premium could be off settled by long- term saving on operational costs as a result of use of local materials, energy and water savings as well as use of recycled material, as implemented in the two case projects, would improve investment decision in green building by developers. The understanding of the drivers and barriers to implementation of green building principles also has implications for guiding government policies and programmes towards green building.Originality/valueThe significance of this study stems from the fact that limited studies, especially in the South African context, have indicated the drivers and barriers to the implementation of green building principles. The case study approach adopted gave a novelty to the study by providing hands-on information from the stakeholders who were known to have played specific roles in the application of green building. The findings indicated that initial high cost premium was not a consideration in developers' choice of green building which justifies the possibility of a costlier product when factors such as environmental sustainability benefit is considered to be ultimate. The study thus suggests further research involving larger cases on energy efficiency, water efficiency and costs of green buildings compared to the conventional type to bring the findings to a broader perspective and assist to benchmark data for green building assessment.


2017 ◽  
Vol 42 (3) ◽  
pp. 125-129
Author(s):  
Ren Hong ◽  
Wang Runyuan ◽  
Du Yongjie

In the context of exploring and implementing China's new urbanization, green eco-city have become a transformation model for urban development. Sharpening green buildings in the construction industry can significantly influence and determine China's economic growth trends, as well as the growth and overall development of its national economy. However, current green eco-city still lack appropriate standards and scientific theoretical basis to determine the target star program of green buildings. To fully implement the green building standards, establish and improve a sound technical standard system for the construction of green building demonstration areas, this study considers the spatial layout of green buildings as the core, adopts a plot potential evaluation method for evaluating a few green building plots, and utilizes four factors in verifying plots with great star potential. The study also establishes a system to calculate the star proportion of green buildings and applies the system in calculating the green building ratio of GM New District. Results indicate that the system can quantitatively analyze a plot potential, calculate the star proportion of green buildings scientifically and rationally, and provide some references for the construction of eco-city and the preparation of special planning for green buildings. The system construction is conducive to provide technical support for the construction of green eco-city. The improved system can be applied in the green building demonstration areas in China, and will be a reference model of constructing green building demonstration areas in the country.


Author(s):  
Elizabeth Sayer ◽  
M. G. Matt Syal ◽  
George Berghorn

Since the focus on sustainable development in 1980s, there has been an increased awareness for well-defined green building standards worldwide. Before the advent of much of the modern green construction standards and practices, ancient European buildings had implemented many features that would be considered green today. Ancient European construction used vernacular architectural, which incorporated climate responsive designs and solar architecture. In some instances, ancient building practices have been used to improve modern building materials, such as brick and concrete. These aspects of green buildings in ancient Europe can provide ample opportunity for research today. The goal of this paper is to analyze building designs, materials, and methods used in ancient Europe and compare these practices to current green building guidelines. The scope of this paper includes examining preexisting literature on building practices in Europe before 1800AD and analyzing two case study buildings in light of LEED green building guidelines. Finally, a comparison matrix of green building features, in ancient European buildings and in modern LEED buildings, is developed. It is hoped that such comparison will provide an insight into the relevance of ancient building attributes in modern green building practices.


2021 ◽  
Vol 13 (7) ◽  
pp. 3675
Author(s):  
Shabir Hussain Khahro ◽  
Danish Kumar ◽  
Fida Hussain Siddiqui ◽  
Tauha Hussain Ali ◽  
Muhammad Saleem Raza ◽  
...  

The construction industry (CI) has a significant impact on the environment and on climate change due to the emission of greenhouse gases like carbon dioxide. Globally accepted Sustainable Development Goals (SDG), specifically SDG 7 (Access to Affordable, Reliable, Sustainable and Modern Energy for All), SDG 9 (Industry, Innovation and Infrastructure), and SDG 11 (Sustainable Cities and Communities) stress the responsible utilization of energy in various industries, including construction. The CI uses almost half of the world’s produced energy. Therefore, this research presents insights into the efficient use of energy in the building sector and shows how energy efficiency can be achieved by altering different parameters and components like orientation, materials, glazing, and HVAC systems through a case study of a hospital building in Green Building Studio (GBS). This paper also aims to use the Building Information Modelling (BIM) approach to make environmentally sustainable decisions to reduce energy waste in projects. Initially, beneficial factors of BIM on green buildings were identified in the literature and later ranked, based on expert opinions collected using a set of questionnaires. Average Index was used for data analysis. The identified benefits were validated by conducting energy analyses on a hospital model through 3D BIM. It was concluded that a substantial share of energy cost, carbon dioxide (CO2), and electricity can be saved using this approach. It was determined that a quick and sustainable design process, improved energy efficiency, enhanced building performance, and provision of better design alternatives are the key benefits of the adoption of BIM by such projects. A Cronbach’s alpha value of 0.822 was obtained, which further validates the results. The proposed approach may lead future structures to be sustainable and enriches the culture of energy-efficient green buildings.


2021 ◽  
Vol 3 (2) ◽  
pp. 97-106
Author(s):  
Eugineus Rivado Victor Laude ◽  
Satriya Wahyu Firmandhani

Flats are one of the government's solution to provide decent housing for low-income people. However, as mostly flats overlook energy efficiency aspects, residents must pay high rental and operational costs. Therefore, this paper aims to study the principles of green buildings, especially in the building envelope that can bear the operating costs of flats with the case study on the A-B-C Tower of Tambora Flats. The A-B-C Tower of Tambora Flats is one of the flats building in Jakarta that has rental cost issues. This study employed the EDGE application that provided energy saving values in the application of green building principles, such as building mass and orientation, wall and roof finishing materials, natural shading and ventilation elements. From these values, it was only the application of green building principles that was significant for the Tambora flats. The results of this study revealed that the optimization of natural ventilation for flats was still important and having a significant impact on energy savings


Sign in / Sign up

Export Citation Format

Share Document