The present study aimed at describing the experimental and theoretical force-deformation curves of sunflower bulk oilseeds at varying initial pressing heights and vessel diameters as well as determining the theoretical pressure and energy along the screw press FL 200 pressing chambers. The design of efficient oil expression systems for industry and small-scale application remains a major challenge to engineers and researchers. In attempting to solve the problem, it is important to understand the linear compression process and to transfer the knowledge to the industry involving mechanical screw presses. The universal compression testing machine at a preset load of 200 kN and a speed of 5 mm·min−1, tangent curve model and the screw press FL 200 geometry parameters were applied. The obtained results of pressure and energy along the screw pressing chambers (1–7) ranged from 0.31 to 101.653 MPa and 12.616 to 1231.228 J. Applying the tangent model at n = 1 and n = 2, the cumulative pressure decreased with increasing vessel diameters while energy increased. The study provides useful information for the analysis of other bulk oilseeds and optimizing the processing parameters of screw press FL 200 and the design and development of new oil presses.
Separation efficiency and energy consumption of oil expression using a screw-press: The case of Jatropha curcas L. seeds
