Thermal characteristics of various biomass fuels in a small-scale biomass combustor

2015 ◽  
Vol 85 ◽  
pp. 243-251 ◽  
Author(s):  
T.T. Al-Shemmeri ◽  
R. Yedla ◽  
D. Wardle
2014 ◽  
Vol 54 (1) ◽  
pp. 74-78 ◽  
Author(s):  
Pavel Skopec ◽  
Jan Hrdlička ◽  
Michal Kaválek

This paper deals with determining the specific emissions from the combustion of two kinds of biomass fuels in a small-scale boiler. The tested fuels were pellets made of wood and pellets made of rape plant straw. In order to evaluate the specific emissions, several combustion experiments were carried out using a commercial 25 kW pellet-fired boiler. The specific emissions of CO, SO<sub>2</sub> and NO<sub>x</sub> were evaluated in relation to a unit of burned fuel, a unit of calorific value and a unit of produced heat. The specific emissions were compared with some data acquired from the reference literature, with relatively different results. The differences depend mainly on the procedure used for determining the values, and references provide no information about this. Although some of our experimental results may fit with one of the reference sources, they do not fit with the other. The reliability of the references is therefore disputable.


2019 ◽  
Vol 6 (10) ◽  
pp. 191119 ◽  
Author(s):  
Gábor Horváth ◽  
Ádám Pereszlényi ◽  
Tímea Tóth ◽  
Szabolcs Polgár ◽  
Imre M. Jánosi

From a large distance tabanid flies may find their host animal by means of its shape, size, motion, odour, radiance and degree of polarization of host-reflected light. After alighting on the host, tabanids may use their mechano-, thermo-, hygro- and chemoreceptors to sense the substrate characteristics. Female tabanids prefer to attack sunlit against shady dark host animals, or dark against bright hosts for a blood meal, the exact reasons for which are unknown. Since sunlit darker surfaces are warmer than shady ones or sunlit/shady brighter surfaces, the differences in surface temperatures of dark and bright as well as sunlit and shady hosts may partly explain their different attractiveness to tabanids. We tested this observed warmth preference in field experiments, where we compared the attractiveness to tabanids ( Tabanus tergestinus ) of a warm and a cold shiny black barrel imitating dark hosts with the same optical characteristics. Using imaging polarimetry, thermography and Schlieren imaging, we measured the optical and thermal characteristics of both barrels and their small-scale models. We recorded the number of landings on these targets and measured the time periods spent on them. Our study revealed that T. tergestinus tabanid flies prefer sunlit warm shiny black targets against sunlit or shady cold ones with the same optical characteristics. These results support our new hypothesis that a blood-seeking female tabanid prefers elevated temperatures, partly because her wing muscles are more rapid and her nervous system functions better (due to faster conduction velocities and synaptic transmission of signals) in a warmer microclimate, and thus, she can avoid the parasite-repelling reactions of host animals by a prompt take-off.


2013 ◽  
Vol 22 (1) ◽  
pp. 44-50
Author(s):  
Sungmin Kum ◽  
Byeonghun Yu ◽  
Kwan-Seok Rhee ◽  
Seungro Lee

Author(s):  
Nikhil Patel ◽  
Darren D. Schmidt

A “Boundary Layer Turbine” (BLT), with a specially designed multiple-disk rotor consisting of a number of closely packed parallel disks fixed to the shaft, was used to demonstrate direct conversion of biomass for small-scale distributed power generation. The turbine operates under the effect of skin friction drag exerted on the parallel plates, resulting from the flow of hot gases between the parallel plates. This concept is well known for its resistance to erosion when pumping viscous fluids, and the technology has been developed for commercial pump applications but not for a turbine. The turbine based on this concept is capable of encountering particle-laden gas and can accept ash-containing biomass fuels. In the present experiments, wood-derived sawdust (particle size ∼1 mm) and natural oats were fired separately as the test fuels. These fuels were injected directly into the stream of vitiated hot air downstream of the combustor. The location of injection was based on a 1- to 3-second residence time for complete combustion. This paper discusses a performance study and assessment of deposition, erosion, and corrosion (DEC) effects on the working components of the BLT. The potential for cost-effective electricity production from biomass in distributed-generation applications is also explored. The BLT was operated for 40 hours, consuming 68 kg of biomass fuel. The testing included initial firing of 10% biomass (by heating value), increasing to 100%. Documented performance shows isentropic turbine efficiencies of 11% at 3.2 kW and 6284 rpm. Turbine inlet conditions averaged 2.8 bar and 645 K. Over the course of testing, no significant component degradation was observed. The hot components were coated with a small amount of soot, but no deposits were formed that would lead to plugging or buildup in the turbine housing. The results of the study represent the first step toward development of a biomass BLT. It has been demonstrated that no significant barriers should hamper the use of biomass fuels in the rotor; however, isentropic efficiencies will have to be improved to at least 50% to achieve meaningful overall cycle efficiency.


2015 ◽  
Vol 179 ◽  
pp. 165-172 ◽  
Author(s):  
S. Fournel ◽  
B. Marcos ◽  
S. Godbout ◽  
M. Heitz

Atmosphere ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 75
Author(s):  
Egor Loboda ◽  
Denis Kasymov ◽  
Mikhail Agafontsev ◽  
Vladimir Reyno ◽  
Yevgeniy Gordeev ◽  
...  

The results of seminatural experiments on the study of steppe and field wildfires characteristic of the steppe and forest-steppe zones of Western Siberia are presented. Using infrared (IR) thermography methods, the main thermal characteristics of the fire front are derived, the flame turbulence scale is estimated, and changes in the structure function of the air refractive index are analyzed in the vicinity of a fire. The effect of a model fire on the change of meteorological parameters (wind velocity components, relative air humidity, and temperature) is ascertained. Large-scale turbulence is observed in the front of a seminatural fire, which is absent in laboratory conditions. The predominance of large-scale turbulence in a flame results in turbulization of the atmosphere in the vicinity of a combustion center. Strong heat release in the combustion zone and flame turbulence increase the vertical component of the wind velocity and produce fluctuations in the air refractive index, which is an indicator of atmospheric turbulization. This creates prerequisites for the formation of a proper wind during large fires. Variations in the gas and aerosol compositions of the atmosphere are measured in the vicinity of the experimental site.


Sign in / Sign up

Export Citation Format

Share Document