Effect of additive on electrochemical corrosion properties of plasma electrolytic oxidation coatings formed on CP Ti under different processing frequency

2015 ◽  
Vol 357 ◽  
pp. 712-720 ◽  
Author(s):  
Mahdi Babaei ◽  
Changiz Dehghanian ◽  
Mojtaba Vanaki
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Electrochemical Corrosion ◽  
Corrosion Properties ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Cp Ti

scholarly journals Improvement of Mechanical and Corrosion Properties of Commercially Pure Titanium Using Alumina PEO Coatings

Coatings ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 29
Author(s):  
Viorel Malinovschi ◽  
Alexandru Horia Marin ◽  
Catalin Ducu ◽  
Sorin Moga ◽  
Victor Andrei ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
Corrosion Properties ◽  
Commercially Pure ◽  
Electrolytic Oxidation ◽  
Aluminum Oxide Layer ◽  
Plasma Electrolytic ◽  
Cp Ti ◽  
Peo Coatings

In this study, the surface of commercially pure titanium (Cp-Ti) was covered by a 21–95 µm-thick aluminum oxide layer using plasma electrolytic oxidation. Coating characterization revealed the formation of nodular and granular α- and γ-Al2O3 phases with minor amounts of TiAl2O5 and Na2Ti4O9 which yielded a maximum 49.0 GPa hardness and 50 N adhesive critical load. The corrosion resistance behavior in 3.5 wt.% NaCl solution of all plasma electrolytic oxidation (PEO) coatings was found to be two orders of magnitude higher compared to bare Ti substrate.

Influence of Current Density on Corrosion Properties of AZ91 Mg Alloy Coated by Plasma Electrolytic Oxidation Method

2011 ◽  
Vol 49 (08) ◽  
pp. 601-607 ◽  
Author(s):  
Byung Uk Lee ◽  
In Jun Hwang Hwang ◽  
Jae Sik Lee ◽  
Young Gun Ko ◽  
Dong Hyuk Shin
Keyword(s):  
Current Density ◽  
Plasma Electrolytic Oxidation ◽  
Mg Alloy ◽  
Corrosion Properties ◽  
Oxidation Method ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic

scholarly journals Comparison of Biocompatible Coatings Produced by Plasma Electrolytic Oxidation on cp-Ti and Ti-Zr-Nb Superelastic Alloy

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 401
Author(s):  
Ruzil Farrakhov ◽  
Olga Melnichuk ◽  
Evgeny Parfenov ◽  
Veta Mukaeva ◽  
Arseniy Raab ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Electrochemical Impedance ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
X Ray ◽  
Kinetic Coefficients ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Cp Ti ◽  
Peo Coatings

The paper compares the coatings produced by plasma electrolytic oxidation (PEO) on commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at. %) for implant applications. The PEO coatings were produced on both alloys in the identical pulsed bipolar regime. The properties of the coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The PEO process kinetics was modeled based on the Avrami theorem and Cottrell equation using a relaxation method. The resultant coatings contain TiO2, for both alloys, and NbO2, Nb2O5, ZrO2 for Ti-18Zr-15Nb alloy. The coating on the Ti-18Zr-15Nb alloy has a higher thickness, porosity, and roughness compared to that on cp-Ti. The values of the kinetic coefficients of the PEO process—higher diffusion coefficient and lower time constant for the processing of Ti-18Zr-15Nb—explain this effect. According to the electrochemical studies, PEO coatings on Ti-18Zr-15Nb alloy provide better corrosion protection. Higher corrosion resistance, porosity, and roughness contribute to better biocompatibility of the PEO coating on Ti-18Zr-15Nb alloy compared to cp-Ti.

scholarly journals Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2094
Author(s):  
Yevheniia Husak ◽  
Joanna Michalska ◽  
Oleksandr Oleshko ◽  
Viktoriia Korniienko ◽  
Karlis Grundsteins ◽  
...  
Keyword(s):  
Cell Culture ◽  
Oxide Layer ◽  
Plasma Electrolytic Oxidation ◽  
Oxide Coating ◽  
Mg Alloy ◽  
Aureus Strain ◽  
Active Surface Area ◽  
Corrosion Properties ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic

The biodegradable metals, including magnesium (Mg), are a convenient alternative to permanent metals but fast uncontrolled corrosion limited wide clinical application. Formation of a barrier coating on Mg alloys could be a successful strategy for the production of a stable external layer that prevents fast corrosion. Our research was aimed to develop an Mg stable oxide coating using plasma electrolytic oxidation (PEO) in silicate-based solutions. 99.9% pure Mg alloy was anodized in electrolytes contained mixtures of sodium silicate and sodium fluoride, calcium hydroxide and sodium hydroxide. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), contact angle (CA), Photoluminescence analysis and immersion tests were performed to assess structural and long-term corrosion properties of the new coating. Biocompatibility and antibacterial potential of the new coating were evaluated using U2OS cell culture and the gram-positive Staphylococcus aureus (S. aureus, strain B 918). PEO provided the formation of a porous oxide layer with relatively high roughness. It was shown that Ca(OH)2 was a crucial compound for oxidation and surface modification of Mg implants, treated with the PEO method. The addition of Ca2+ ions resulted in more intense oxidation of the Mg surface and growth of the oxide layer with a higher active surface area. Cell culture experiments demonstrated appropriate cell adhesion to all investigated coatings with a significantly better proliferation rate for the samples treated in Ca(OH)2-containing electrolyte. In contrast, NaOH-based electrolyte provided more relevant antibacterial effects but did not support cell proliferation. In conclusion, it should be noted that PEO of Mg alloy in silicate baths containing Ca(OH)2 provided the formation of stable biocompatible oxide coatings that could be used in the development of commercial degradable implants.

Sign in / Sign up

Export Citation Format

Share Document