Potential impacts of an Emission Control Area on air quality in Alaska coastal regions

2012 ◽  
Vol 50 ◽  
pp. 192-202 ◽  
Author(s):  
Trang T. Tran ◽  
Nicole Mölders
Author(s):  
Cuihong Qin ◽  
Min Li ◽  
Zheng Wang ◽  
Chunling Liu ◽  
Wei Zhang

2020 ◽  
Vol 20 (15) ◽  
pp. 9135-9151
Author(s):  
Stina Ausmeel ◽  
Axel Eriksson ◽  
Erik Ahlberg ◽  
Moa K. Sporre ◽  
Mårten Spanne ◽  
...  

Abstract. In coastal areas, there is increased concern about emissions from shipping activities and the associated impact on air quality. We have assessed the ship aerosol properties and the contribution to coastal particulate matter (PM) and nitrogen dioxide (NO2) levels by measuring ship plumes in ambient conditions at a site in southern Sweden, within a Sulfur Emission Control Area. Measurements took place during a summer and a winter campaign, 10 km downwind of a major shipping lane. Individual ships showed large variability in contribution to total particle mass, organics, sulfate, and NO2. The average emission contribution of the shipping lane was 29±13 and 37±20 ng m−3 to PM0.5, 18±8 and 34±19 ng m−3 to PM0.15, and 1.21±0.57 and 1.11±0.61 µg m−3 to NO2, during winter and summer, respectively. Sulfate and organics dominated the particle mass and most plumes contained undetectable amounts of equivalent black carbon (eBC). The average eBC contribution was 3.5±1.7 ng m−3 and the absorption Ångström exponent was close to 1. Simulated ageing of the ship aerosols using an oxidation flow reactor showed that on a few occasions, there was an increase in sulfate and organic mass after photochemical processing of the plumes. However, most plumes did not produce measurable amounts of secondary PM upon simulated ageing.


Author(s):  
Lu Zhen ◽  
Miao Li ◽  
Zhuang Hu ◽  
Wenya Lv ◽  
Xiao Zhao

2020 ◽  
Vol 206 ◽  
pp. 02006
Author(s):  
Mao Tianyu ◽  
Li Yajuan ◽  
Chang Fang

I After the implementation of ship emissions control area, the urgent need for the practical monitoring technology. This paper comprehensively studies the international and domestic cases of ship emission control monitoring: The following methods are used: direct collection of fuel oil samples for analysis, collection of ship exhaust samples and analysis, remote sensing observation of ship exhaust and analysis, as well as the use of fixed-point monitoring station system to monitor air quality. X-ray fluorescence spectroscopy is used to analyze the fuel sulfur content directly, and the carbon balance method can be used to calculate the fuel oil content,. The fixed position monitoring system is a comprehensive monitoring method, which can effectively observe the influence of the emission of the ship exhaust on air quality, and evaluate the effect of the control area. Afterwards, the application should also be concerned about the effects of various methods of comparison, alternative measures and focus on the effect of tail gas treatment facilities assessment, enhanced port area environmental monitoring networks.


Sign in / Sign up

Export Citation Format

Share Document