Denitrifying dephosphatation over nitrite: Effects of nitrite concentration, organic carbon, and pH

2010 ◽  
Vol 101 (11) ◽  
pp. 3870-3875 ◽  
Author(s):  
Shao-Hui Zhang ◽  
Yi Huang ◽  
Yu-Mei Hua
Author(s):  
Yang Lu ◽  
Gayathri Natarajan ◽  
Thi Quynh Ngoc Nguyen ◽  
Sara Swa Thi ◽  
Krithika Arumugam ◽  
...  

ABSTRACTNineteen anaerobic ammonium oxidizing bacteria (AnAOB) species have been identified, yet the environmental factors that select for each species within a specialized ecological niche have not been described. We enriched AnAOB from a single inoculum under standard enrichment conditions (reactor R1) with stepwise increase in nitrite and ammonia concentration, nitric oxide (NO) supplementation (reactor R2), or with complex organic carbon using wastewater collected from mainstream wastewater treatment facility (reactor R3). AnAOB were enriched up to 80%, 90% and 50% relative abundance in R1, R2 and R3 respectively. Candidatus Brocadia caroliniensis predominated in all reactors, but a shift towards Ca. Brocadia sinica was consistently observed with increasing ammonium and nitrite concentrations beyond 270 mg NH4-N L−1 and 340 mg NO2-N L−1, respectively. In the presence of NO, growth of heterotrophs were inhibited, and Ca. Jettenia could coexist with Ca. B. caroliniensis before diminishing when nitrite increased to 160 mg NO2-N L−1. In contrast, supplementation of organic carbon led to the emergence of heterotrophic communities that coevolved with Ca. B. caroliniensis. Ca. B. caroliniensis and Ca. Jettenia preferentially form biofilms on reactor surfaces, whereas Ca. Brocadia sinica forms granules in suspension. Our results thus indicate that multiple AnAOB species co-exist and occupy sub-niches in anaerobic ammonium oxidation reactors, that the dominant population can be reversibly shifted by, for example, changing the nitrogen load (i.e. high nitrite concentration favors Ca. Brocadia caroliniensis), and that speciation has implications for wastewater process design, with the optimum cell immobilization strategy (i.e. carriers vs granules) dependent on which species dominates.IMPORTANCEThis study demonstrates how to reversibly and predictably shift dominant anammox population using operating parameters (e.g. high nitrite concentration favours Ca. Brocadia sinica), and that species selection has implications for wastewater process design, illustrated here in terms of dependence of optimum cell immobilization strategy (i.e. carriers vs granules) on which species dominates. The research informs the characterization of AnAOBs at species level as well process design and control strategies targeting Anammox species population dynamics in full scale waste water treatment systems.


Author(s):  
Dong Chen ◽  
Che-Jen Lin ◽  
R. Gavin Jones ◽  
Sehul Patel ◽  
Rachelle Smith ◽  
...  
Keyword(s):  

2018 ◽  
Vol 18 (3) ◽  
pp. 81-91 ◽  
Author(s):  
C. Lalhriatpuia

Nanopillars-TiO2 thin films was obtained on a borosilicate glass substrate with (S1) and without (S2) polyethylene glycol as template. The photocatalytic behaviour of S1 and S2 thin films was assessed inthe degradation of methylene blue (MB) dye from aqueous solution under batch reactor operations. The thin films were characterized by the SEM, XRD, FTIR and AFM analytical methods. BET specific surface area and pore sizes were also obtained. The XRD data confirmed that the TiO2 particles are in its anatase mineral phase. The SEM and AFM images indicated the catalyst is composed with nanosized pillars of TiO2, evenly distributed on the surface of the substrate. The BET specific surface area and pore sizes of S1 and S2 catalyst were found to be 5.217 and 1.420 m2/g and 7.77 and 4.16 nm respectively. The photocatalytic degradation of MB was well studied at wide range of physico-chemical parameters. The effect of solution pH (pH 4.0 to 10.0) and MB initial concentration (1.0 to 10.0 mg/L) was extensively studied and the effect of several interfering ions, i.e., cadmium nitrate, copper sulfate, zinc chloride, sodium chloride, sodium nitrate, sodium nitrite, glycine, oxalic acid and EDTA in the photocatalytic degradation of MB was demonstrated. The maximum percent removal of MB was observed at pH 8.0 beyond which it started decreasing and a low initial concentration of the pollutant highly favoured the photocatalytic degradation using thin films and the presence of several interfering ions diminished the photocatalytic activity of thin films to some extent. The overall photocatalytic activity was in the order: S2 > S1 > UV. The photocatalytic degradation of MB was followed the pseudo-first-order rate kinetics. The mineralization of MB was studied with total organic carbon measurement using the TOC (total organic carbon) analysis.


Sign in / Sign up

Export Citation Format

Share Document