Detection of apnea events from ECG segments using Fourier decomposition method

2020 ◽  
Vol 61 ◽  
pp. 102005 ◽  
Author(s):  
Binish Fatimah ◽  
Pushpendra Singh ◽  
Amit Singhal ◽  
Ram Bilas Pachori
2021 ◽  
pp. 146808742098819
Author(s):  
Wang Yang ◽  
Cheng Yong

As a non-intrusive method for engine working condition detection, the engine surface vibration contains rich information about the combustion process and has great potential for the closed-loop control of engines. However, the measured engine surface vibration signals are usually induced by combustion as well as non-combustion excitations and are difficult to be utilized directly. To evaluate some combustion parameters from engine surface vibration, the tests were carried out on a single-cylinder diesel engine and a new method called Fourier Decomposition Method (FDM) was used to extract combustion induced vibration. Simulated and test results verified the ability of the FDM for engine vibration analysis. Based on the extracted vibration signals, the methods for identifying start of combustion, location of maximum pressure rise rate, and location of peak pressure were proposed. The cycle-by-cycle analysis of the results show that the parameters identified based on vibration and in-cylinder pressure have the similar trends, and it suggests that the proposed FDM-based methods can be used for extracting combustion induced vibrations and identifying the combustion parameters.


Measurement ◽  
2021 ◽  
pp. 109837
Author(s):  
Jinde Zheng ◽  
Siqi Huang ◽  
Haiyang Pan ◽  
Jinyu Tong ◽  
Chengjun Wang ◽  
...  

Author(s):  
R. Srivastava ◽  
Milind A. Bakhle ◽  
Theo G. Keith ◽  
G. L. Stefko

In the present work a comparative study of phase-lagged boundary condition methods is carried out. The relative merits and advantages of time-shifted and the Fourier decomposition methods are compared. Both methods are implemented in a time marching Euler/Navier-Stokes solver and are applied to a flat plate helical fan with harmonically oscillating blades to perform the study. Results were obtained for subsonic as well as supersonic inflows. Results for subsonic inflow showed good comparisons with published results and between the two methods along with comparable computational costs. For the supersonic inflow, despite the presence of shocks at the periodic boundary results from both the methods compared well, however, Fourier decomposition method was computationally more expensive. For linear flowfield Fourier decomposition method is best suited, especially for work-station environment. The time-shifted method is better suited for CRAY category of computers where fast input-output devices are available.


2020 ◽  
Vol 32 (3) ◽  
pp. 035003
Author(s):  
Minqiang Deng ◽  
Aidong Deng ◽  
Jing Zhu ◽  
Yaowei Shi ◽  
Yang Liu ◽  
...  

Author(s):  
Pushpendra Singh ◽  
Shiv Dutt Joshi ◽  
Rakesh Kumar Patney ◽  
Kaushik Saha

for many decades, there has been a general perception in the literature that Fourier methods are not suitable for the analysis of nonlinear and non-stationary data. In this paper, we propose a novel and adaptive Fourier decomposition method (FDM), based on the Fourier theory, and demonstrate its efficacy for the analysis of nonlinear and non-stationary time series. The proposed FDM decomposes any data into a small number of ‘Fourier intrinsic band functions’ (FIBFs). The FDM presents a generalized Fourier expansion with variable amplitudes and variable frequencies of a time series by the Fourier method itself. We propose an idea of zero-phase filter bank-based multivariate FDM (MFDM), for the analysis of multivariate nonlinear and non-stationary time series, using the FDM. We also present an algorithm to obtain cut-off frequencies for MFDM. The proposed MFDM generates a finite number of band-limited multivariate FIBFs (MFIBFs). The MFDM preserves some intrinsic physical properties of the multivariate data, such as scale alignment, trend and instantaneous frequency. The proposed methods provide a time–frequency–energy (TFE) distribution that reveals the intrinsic structure of a data. Numerical computations and simulations have been carried out and comparison is made with the empirical mode decomposition algorithms.


Sign in / Sign up

Export Citation Format

Share Document