scholarly journals Lattice structure lightweight triangulation for additive manufacturing

2017 ◽  
Vol 90 ◽  
pp. 95-104 ◽  
Author(s):  
Laurent Chougrani ◽  
Jean-Philippe Pernot ◽  
Philippe Véron ◽  
Stéphane Abed
Keyword(s):  
Additive Manufacturing ◽  
Lattice Structure

Redesign of the Femoral Stem for a Total Hip Arthroplasty for Additive Manufacturing

2018 ◽  
Author(s):  
Bradley Hanks ◽  
Shantanab Dinda ◽  
Sanjay Joshi
Keyword(s):  
Additive Manufacturing ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Lattice Structure ◽  
Stress Shielding ◽  
Patient Specific ◽  
Hip Implants ◽  
Hip Implant ◽  
Total Hip ◽  
Multiple Materials

Total hip arthroplasty (THA) is an increasingly common procedure that replaces all or part of the hip joint. The average age of patients is decreasing, which in turn increases the need for more durable implants. Revisions in hip implants are frequently caused by three primary issues: femoral loading, poor fixation, and stress shielding. First, as the age of hip implant patients decreases, the hip implants are seeing increased loading, beyond what they were traditionally designed for. Second, traditional implants may have roughened surfaces but are not fully porous which would allow bone to grow in and through the implant. Third, traditional implants are too stiff, causing more load to be carried by the implant and shielding the bone from stress. Ultimately this stress shielding leads to bone resorption and implant loosening. Additive manufacturing (AM) presents a unique opportunity for enhanced performance by allowing for personalized medicine and increased functionality through geometrically complex parts. Much research has been devoted to how AM can be used to improve surgical implants through lattice structures. To date, the authors have found no studies that have performed a complete 3D lattice structure optimization in patient specific anatomy. This paper discusses the general design of an AM hip implant that is personalized for patient specific anatomy and proposes a workflow for optimizing a lattice structure within the implant. Using this design workflow, several lattice structured AM hip implants of various unit cell types are optimized. A solid hip implant is compared against the optimized hip implants. It appears the AM hip implant with a tetra lattice outperforms the other implant by reducing stiffness and allowing for greater bone ingrowth. Ultimately it was found that AM software still has many limitations associated with attempting complex optimizations with multiple materials in patient specific anatomy. Though software limitations prevented a full 3D optimization in patient specific anatomy, the challenges associated such an approach and limitations of the current software are discussed.

An improved lattice structure design optimization framework considering additive manufacturing constraints

2017 ◽  
Vol 23 (2) ◽  
pp. 305-319 ◽  
Author(s):  
Recep M. Gorguluarslan ◽  
Umesh N. Gandhi ◽  
Yuyang Song ◽  
Seung-Kyum Choi
Keyword(s):  
Additive Manufacturing ◽  
Lattice Structure ◽  
Structure Optimization ◽  
Optimization Methods ◽  
Structure Design ◽  
Second Phase ◽  
Manufacturing Constraints ◽  
Ground Structure ◽  
Content Type ◽  
Optimization Framework

Purpose Methods to optimize lattice structure design, such as ground structure optimization, have been shown to be useful when generating efficient design concepts with complex truss-like cellular structures. Unfortunately, designs suggested by lattice structure optimization methods are often infeasible because the obtained cross-sectional parameter values cannot be fabricated by additive manufacturing (AM) processes, and it is often very difficult to transform a design proposal into one that can be additively designed. This paper aims to propose an improved, two-phase lattice structure optimization framework that considers manufacturing constraints for the AM process. Design/methodology/approach The proposed framework uses a conventional ground structure optimization method in the first phase. In the second phase, the results from the ground structure optimization are modified according to the pre-determined manufacturing constraints using a second optimization procedure. To decrease the computational cost of the optimization process, an efficient gradient-based optimization algorithm, namely, the method of feasible directions (MFDs), is integrated into this framework. The developed framework is applied to three different design examples. The efficacy of the framework is compared to that of existing lattice structure optimization methods. Findings The proposed optimization framework provided designs more efficiently and with better performance than the existing optimization methods. Practical implications The proposed framework can be used effectively for optimizing complex lattice-based structures. Originality/value An improved optimization framework that efficiently considers the AM constraints was reported for the design of lattice-based structures.

Optimum design of automobile components using lattice structures for additive manufacturing

2020 ◽  
Vol 62 (6) ◽  
pp. 633-639 ◽  
Author(s):  
Büşra Aslan ◽  
Ali Rıza Yıldız
Keyword(s):  
Topology Optimization ◽  
Additive Manufacturing ◽  
Optimization Design ◽  
Lattice Structure ◽  
Structure Optimization ◽  
The Finite Element Method ◽  
Special Effect ◽  
Design Structure ◽  
Complex Models ◽  
Automobile Components

Abstract In today’s world, reducing fuel consumption is one of the most important goals for the automotive industry. For this reason, weight reduction is one of the main topics in this research and for various companies. In this research, topology optimization was conducted on a suspension arm as a means of ensuring balance in automobiles. Subsequently, the model, formed by topology optimization was filled with a lattice structure and re-optimized by size optimization to obtain optimum dimensions for the model. These operations are described as lattice structure optimization. Additive manufacturing (3D printer) is necessary to produce complex models (after topology and lattice structure optimization). A static analysis of the new models was conducted by using the finite element method, and the results were compared with those of the initial design of the model. As a result of the comparison, positive results were obtained, and it was shown that topology optimization and lattice structural optimization could be used in the design of vehicle elements. According to the results obtained from lattice structure optimization, design structure can be formed more reliably than via topology optimization. In addition, both configurations and layouts of the cellular structures have a special effect on the overall performance of the lattice structure.

LATTICE STRUCTURE OPTIMIZATION WITH ORIENTATION-DEPENDENT MATERIAL PROPERTIES

2021 ◽  
pp. 1-33
Author(s):  
Conner Sharpe ◽  
Carolyn Seepersad
Keyword(s):  
Additive Manufacturing ◽  
Design Process ◽  
Material Properties ◽  
Computational Models ◽  
Lattice Structure ◽  
Lattice Structures ◽  
Performance Improvements ◽  
Structural Applications ◽  
Manufacturing Techniques ◽  
And Performance

Abstract Advances in additive manufacturing techniques have enabled the production of parts with complex internal geometries. However, the layer-based nature of additive processes often results in mechanical properties that vary based on the orientation of the feature relative to the build plane. Lattice structures have been a popular design application for additive manufacturing due to their potential uses in lightweight structural applications. Many recent works have explored the modeling, design, and fabrication challenges that arise in the multiscale setting of lattice structures. However, there remains a significant challenge in bridging the simplified computational models used in the design process and the more complex properties actually realized in fabrication. This work develops a design approach that captures orientation-dependent material properties that have been observed in metal AM processes while remaining suitable for use in an iterative design process. Exemplar problems are utilized to investigate the potential design changes and performance improvements that can be attained by taking the directional dependence of the manufacturing process into account in the design of lattice structures.

Stress-Strain Behavior of an Octahedral and Octet-Truss Lattice Structure Fabricated Using the CLIP Technology

2017 ◽  
Vol 1142 ◽  
pp. 245-249 ◽  
Author(s):  
Anil Saigal ◽  
John Tumbleston
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Lattice Structure ◽  
Liquid Interface ◽  
Layer By Layer ◽  
Stress Strain ◽  
Strain Behavior ◽  
Octet Truss ◽  
Continuous Liquid Interface Production ◽  
Similar Density

In the rapidly growing field of additive manufacturing (AM), the focus in recent years has shifted from prototyping to manufacturing fully functional, ultralight, ultrastiff end-use parts. This research investigates the stress-strain behavior of an octahedral-and octet-truss lattice structured polyacrylate fabricated using Continuous Liquid Interface Production (CLIP) technology based on 3D printing and additive manufacturing processes. Continuous Liquid Interface Production (CLIP) is a breakthrough technology that grows parts instead of printing them layer by layer. Lattice structures such as the octahedral-and octet-truss lattice have recently attracted a lot of attention since they are often structurally more efficient than foams of a similar density made from the same material, and the ease with which these structures can now be produced using 3D printing and additive manufacturing. This research investigates the stress-strain behavior under compression of an octahedral-and octet-truss lattice structured polyacrylate fabricated using CLIP technology

Lattice Structure Optimization With Orientation-Dependent Material Properties

2020 ◽  
Author(s):  
Conner Sharpe ◽  
Carolyn Conner Seepersad
Keyword(s):  
Additive Manufacturing ◽  
Design Process ◽  
Material Properties ◽  
Computational Models ◽  
Lattice Structure ◽  
Lattice Structures ◽  
Performance Improvements ◽  
Structural Applications ◽  
Manufacturing Techniques ◽  
And Performance

Abstract Advances in additive manufacturing techniques have enabled the production of parts with complex internal geometries. However, the layer-based nature of additive processes often results in mechanical properties that vary based on the orientation of the feature relative to the build plane. Lattice structures have been a popular design application for additive manufacturing due to their potential uses in lightweight structural applications. Many recent works have explored the modeling, design, and fabrication challenges that arise in the multiscale setting of lattice structures. However, there remains a significant challenge in bridging the simplified computational models used in the design process and the more complex properties actually realized in fabrication. This work develops a design approach that captures orientation-dependent material properties that have been observed in metal AM processes while remaining suitable for use in an iterative design process. Exemplar problems are utilized to investigate the potential design changes and performance improvements that can be attained by taking the directional dependence of the manufacturing process into account in the design of lattice structures.

Sign in / Sign up

Export Citation Format

Share Document