Thermal stability, flame retardancy and mechanical properties of cotton fabrics treated with inorganic coatings synthesized through sol–gel processes

2012 ◽  
Vol 87 (3) ◽  
pp. 2093-2099 ◽  
Author(s):  
Jenny Alongi ◽  
Mihaela Ciobanu ◽  
Giulio Malucelli
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Flame Retardancy ◽  
Sol Gel ◽  
Cotton Fabrics ◽  
Inorganic Coatings

Expanded vermiculite-filled flexible polymer composites

2021 ◽  
pp. 009524432110290
Author(s):  
Mukaddes Sevval Cetin ◽  
Ozan Toprakci ◽  
Omer Suat Taskin ◽  
Abdullah Aksu ◽  
Hatice Aylin Karahan Toprakci
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Contact Angle ◽  
Polymer Composites ◽  
Flame Retardancy ◽  
Composite Films ◽  
Filler Concentration ◽  
High Shear ◽  
Flexible Polymer ◽  
Shear Mixing

This study focuses on the fabrication and characterization of vermiculite-filled flexible polymer composites. Exfoliated vermiculite was incorporated into triblock thermoplastic elastomer copolymer, styrene- b-(ethylene- co-butylene)- b-styrene (SEBS), at various levels from 1 to 15 wt% by a high shear mixer. The composite films were obtained by the combination of solvent casting and compression molding. The morphological, structural, thermal, and mechanical properties and contact angle of the composites were determined. Some micro-morphological differences were observed between the samples and the difference was assumed to be caused by high shear mixing and filler concentration. High shear mixing was found effective in terms of the detachment of vermiculite layers at all concentrations. However, at low filler loading, that behavior was more obvious. At 1 wt% filler concentration, mechanical properties increased that was probably caused by good filler-matrix interaction stemmed from smaller particle size. At higher vermiculite concentrations, fillers found to show agglomerations that led to a decrease in mechanical strength and strain at break. Elastic and secant modulus showed an increasing trend. Contact angle measurements were carried out to determine the oleophilic character of the samples. An increase in the vermiculite content resulted in higher oleophilic character and the lowest contact angle was obtained at 15 wt% VMT loading. In addition to these, thermal stability, thermal dimensional stability and flame retardancy were improved by the incorporation of VMT. 15 wt% vermiculite-filled sample showed the best performance in terms of thermal stability and flame retardancy.

Synthetic novel, convenient and eco-friendly Si/P/N synergistic treatment agent to improve the flame retardancy and thermal stability of cotton fabrics

Cellulose ◽  
2020 ◽  
Vol 27 (17) ◽  
pp. 10473-10487
Author(s):  
Zheng Zhang ◽  
Dezheng Kong ◽  
Heng Sun ◽  
Ling Sun ◽  
Chaohong Dong ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Flame Retardancy ◽  
Cotton Fabrics ◽  
Treatment Agent ◽  
Thermal Stability Of

scholarly journals Highly Efficient Composite Flame Retardants for Improving the Flame Retardancy, Thermal Stability, Smoke Suppression, and Mechanical Properties of EVA

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1251
Author(s):  
Yilin Liu ◽  
Bin Li ◽  
Miaojun Xu ◽  
Lili Wang
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Production Rate ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Mass Loss Rate ◽  
Smoke Suppression ◽  
Average Mass

Ethylene vinyl acetate (EVA) copolymer has been used extensively in many fields. However, EVA is flammable and releases CO gas during burning. In this work, a composite flame retardant with ammonium polyphosphate (APP), a charring–foaming agent (CFA), and a layered double hydroxide (LDH) containing rare-earth elements (REEs) was obtained and used to improve the flame retardancy, thermal stability, and smoke suppression for an EVA matrix. The thermal analysis showed that the maximum thermal degradation temperature of all composites increased by more than 37 °C compared with that of pure EVA. S-LaMgAl/APP/CFA/EVA, S-CeMgAl/APP/CFA/EVA, and S-NdMgAl/APP/CFA/EVA could achieve self-extinguishing behavior according to the UL-94 tests (V-0 rating). The peak heat release rate (pk-HRR) indicated that all LDHs containing REEs obviously reduced the fire strength in comparison with S-MgAl. In particular, pk-HRR of S-LaMgAl/APP/CFA/EVA, S-CeMgAl/APP/CFA/EVA and S-NdMgAl/APP/CFA/EVA were all decreased by more than 82% in comparison with pure EVA. Furthermore, the total heat release (THR), smoke production rate (SPR), and production rate of CO (COP) also decreased significantly. The average mass loss rate (AMLR) confirmed that the flame retardant exerted an effect in the condensed phase of the composites. Meanwhile, the combination of APP, CFA, and LDH containing REEs allowed the EVA matrix to maintain good mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document