Rapid synthesis of zeolite film coating on stainless steel

2020 ◽  
Vol 356 ◽  
pp. 73-79
Author(s):  
J.J. Ternero-Hidalgo ◽  
F.F. Budihardjo ◽  
K.L. Yeung
2003 ◽  
Vol 23 (1-2) ◽  
pp. 117-121 ◽  
Author(s):  
G. Tyuliev ◽  
D. Panayotov ◽  
I. Avramova ◽  
D. Stoichev ◽  
Ts. Marinova

Vacuum ◽  
1999 ◽  
Vol 53 (1-2) ◽  
pp. 281-284 ◽  
Author(s):  
S.S. Inayoshi ◽  
S. Tsukahara ◽  
A. Kinbara

2013 ◽  
Vol 295-298 ◽  
pp. 413-417 ◽  
Author(s):  
Zai Feng Shi ◽  
Su Min Zhang ◽  
Su Guo

To study the effects of substrate materials on the photocatalytic activity, TiO2films were immobilized on the inner wall surface of ceramic, glass and stainless steel tubes by sol-gel method. X-ray diffraction (XRD) results indicated that the crystal form of TiO2were all anatase type with theoretical particle size of 15 nm. According to the X-ray photoelectron spectroscopy (XPS) results, appearance of the element Na was observed which would decrease the photocatalytic activity. Scanning electron microscope (SEM) photos showed that the film coating on the ceramic and glass were even and uniform with thickness of about 300 nm and practical particle size of 20 nm to 100 nm. However, the film coating on stainless steel was hackly which would lead to diffraction of lights. The degradation rate constants of methylene blue (MB) with initial concentration of 5 mg.L-1were 0.049 min-1、0.029 min-1and 0.023 min-1with films coating on ceramic, stainless steel and glass tubes respectively. Degraded with TiO2film coating on ceramic tube, the according rate constants of phenol were 0.37, 0.14, 0.04 and 0.02 min-1for initial concentration of 2, 10, 50 and 100 mg.L-1respectively.


2007 ◽  
Vol 201 (9-11) ◽  
pp. 5487-5492 ◽  
Author(s):  
N. Ueda ◽  
N. Yamauchi ◽  
T. Sone ◽  
A. Okamoto ◽  
M. Tsujikawa

Author(s):  
Shogo Mabuchi ◽  
Tatsuya Hazuku ◽  
Shin-ichi Motoda ◽  
Tomoji Takamasa ◽  
Susumu Uematsu ◽  
...  

This study examines a corrosion control technique for corrosion-resistant materials or of stainless steel in piping for nuclear reactors. This employs an effect of Radiation Induced Surface Activation (RISA). The experimental results revealed: (1) The mechanism behind the corrosion control proposed by the previous report was confirmed to be appropriate. This via tests that measured the amount of dissolved oxygen and iron ions, in the solution. (2) The corrosion control technique was confirmed to be useful for stainless steel with any kind of metal oxide film coating on the surface. (3) It was also shown to be useful even in actual seawater, due to biological effects, which is a far more severe environment for corrosion control than simple salt water. The corrosion control technique for corrosion-resistant material using RISA in seawater has therefore been shown to offer a significant potential for practical applications in naval architecture and marine structures.


Sign in / Sign up

Export Citation Format

Share Document