Characteristics and Photocatalytic Activity of TiO2 Films Immobilized on Ceramic, Glass and Stainless Steel

2013 ◽  
Vol 295-298 ◽  
pp. 413-417 ◽  
Author(s):  
Zai Feng Shi ◽  
Su Min Zhang ◽  
Su Guo
Keyword(s):  
Particle Size ◽  
Stainless Steel ◽  
Photocatalytic Activity ◽  
Rate Constants ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Film Coating ◽  
Initial Concentration ◽  
X Ray ◽  
Ceramic Glass

To study the effects of substrate materials on the photocatalytic activity, TiO2films were immobilized on the inner wall surface of ceramic, glass and stainless steel tubes by sol-gel method. X-ray diffraction (XRD) results indicated that the crystal form of TiO2were all anatase type with theoretical particle size of 15 nm. According to the X-ray photoelectron spectroscopy (XPS) results, appearance of the element Na was observed which would decrease the photocatalytic activity. Scanning electron microscope (SEM) photos showed that the film coating on the ceramic and glass were even and uniform with thickness of about 300 nm and practical particle size of 20 nm to 100 nm. However, the film coating on stainless steel was hackly which would lead to diffraction of lights. The degradation rate constants of methylene blue (MB) with initial concentration of 5 mg.L-1were 0.049 min-1、0.029 min-1and 0.023 min-1with films coating on ceramic, stainless steel and glass tubes respectively. Degraded with TiO2film coating on ceramic tube, the according rate constants of phenol were 0.37, 0.14, 0.04 and 0.02 min-1for initial concentration of 2, 10, 50 and 100 mg.L-1respectively.

scholarly journals Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation

Separations ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 25
Author(s):  
Chukwuka Bethel Anucha ◽  
Ilknur Altin ◽  
Emin Bacaksız ◽  
Tayfur Kucukomeroglu ◽  
Masho Hilawie Belay ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Pure Tio2 ◽  
Component Part ◽  
Energy Yield ◽  
Mechanical Agitation ◽  
X Ray

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500 °C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly.

scholarly journals Photocatalytic Performance of SiO2/CNOs/TiO2 to Accelerate the Degradation of Rhodamine B under Visible Light

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1671 ◽  
Author(s):  
Weike Zhang ◽  
Yanrong Zhang ◽  
Kai Yang ◽  
Yanqing Yang ◽  
Jia Jia ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electronic Microscope

A silicon dioxide/carbon nano onions/titanium dioxide (SiO2/CNOs/TiO2) composite was synthesized by a simple sol-gel method and characterized by the methods of X-ray diffraction (XRD), scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), thermogravimetric analysis (TG), differential scanning calorimeter (DSC) and UV-Vis diffuse reflectance spectra (UV-Vis DRS). In this work, the photocatalytic activity of the SiO2/CNOs/TiO2 photocatalyst was assessed by testing the degradation rate of Rhodamine B (RhB) under visible light. The results indicated that the samples exhibited the best photocatalytic activity when the composite consisted of 3% CNOs and the optimum dosage of SiO2/CNOs/TiO2(3%) was 1.5 g/L as evidenced by the highest RhB degradation rate (96%). The SiO2/CNOs/TiO2 composite greatly improved the quantum efficiency of TiO2. This work provides a new option for the modification of subsequent nanocomposite oxide nanoparticles.

scholarly journals Silica-Copper Oxide Composite Thin Films as Solar Selective Coatings Prepared by Dipping Sol Gel

2008 ◽  
Vol 2008 ◽  
pp. 1-5 ◽  
Author(s):  
E. Barrera-Calva ◽  
J. Méndez-Vivar ◽  
M. Ortega-López ◽  
L. Huerta-Arcos ◽  
J. Morales-Corona ◽  
...  
Keyword(s):  
Thin Films ◽  
Stainless Steel ◽  
Copper Oxide ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Silica Matrix ◽  
Composite Thin Films ◽  
X Ray ◽  
Molar Ratios ◽  
Steel Substrates

Silica-copper oxide (silica-CuO) composite thin films were prepared by a dipping sol-gel route using ethanolic solutions comprised TEOS and a copper-propionate complex. Sols with different TEOS/Cu-propionate (Si/Cu) molar ratios were prepared and applied on stainless steel substrates using dipping process. During the annealing process, copper-propionate complexes developed into particulate polycrystalline CuO dispersed in a partially crystallized silica matrix, as indicated by the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. The gel thermal analysis revealed that the prepared material might be stable up to400°C. The silica-CuO/stainless steel system was characterized as a selective absorber surface and its solar selectivity parameters, absorptance (α), and emittance (ε) were evaluated from UV-NIR reflectance data. The solar parameters of such a system were mostly affected by the thickness and phase composition of theSiO2-CuO film. Interestingly, the best solar parameters (α= 0.92 andε= 0.2) were associated to the thinnest films, which comprised a CuO-Cu2Omixture immersed in the silica matrix, as indicated by XPS.

Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles

2012 ◽  
Vol 455-456 ◽  
pp. 110-114 ◽  
Author(s):  
Xuan Dong Li ◽  
Xi Jiang Han ◽  
Wen Ying Wang ◽  
Xiao Hong Liu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Nb-doped TiO2 powders with different concentrations of Nb have been synthesized by a sol-gel method and characterized by a series of technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. The photocatalytic activity of Nb-doped TiO2 is evaluated by degradation efficiency of methyl orange in aqueous solution. The results indicate that the photocatalytic activity of Nb-doped TiO2 synthesized with a Nb/Ti molar ratio of 5% is higher than that of TiO2 under the visible light.

Preparation and Photocatalytic Properties of La, Ce and Nonmetal N Co-Doped TiO2

2016 ◽  
Vol 680 ◽  
pp. 193-197
Author(s):  
San Ti Yi ◽  
Si Qin Zhao
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Uv Light ◽  
Sol Gel ◽  
Light Response ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Co Doped

TiO2, 1%La/TiO2, 1%Ce/TiO2 and a series of Laand Ce co-doped TiO2 photocatalysts were prepared by sol-gel method. Using sol-gel method combine with hydrothermal method prepared rare earth La, Ce and nitrogen co-doped TiO2 photocatalysts. The microstructure, spectroscopy performance and ion doped form of prepared samples were characterized by X-ray powder diffraction (XRD), UV-Vis diffuse reflectance spectroscopy techniques and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of doped TiO2 were examined by measuring the photodegradation of methyl orange. The results showed that the products were all anatase TiO2 nano powder, doping Laor Cehinder the growth of TiO2 particle, further more, doping Laand Cetogether hinder the growth of TiO2 particle more effective, doping N broaden the light response range of TiO2 photocatalyst. At the same time, the photocatalytic activity results indicated that the prepared samples showed superior UV light photocatalytic activity, the sample 1% (La:Ce,9:1)-N/TiO2 showed the highest UV-vis photocatalytic activity.

scholarly journals Enhanced Visible Light Photocatalytic Activity of Mesoporous AnataseTiO2Codoped with Nitrogen and Chlorine

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Xiuwen Cheng ◽  
Xiujuan Yu ◽  
Zipeng Xing ◽  
Lisha Yang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Band Gap ◽  
Light Absorption ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Visible Region ◽  
X Ray ◽  
Visible Light Photocatalytic Activity ◽  
Visible Light Photocatalytic

Anatase mesoporous titanium dioxide codoped with nitrogen and chlorine (N-Cl-TiO2) photocatalysts were synthesized through simple one-step sol-gel reactions in the presence of ammonium chloride. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible diffuse reflection spectrum (UV-vis DRS). XRD results indicated that codoping with nitrogen and chlorine could effectively retard the phase transformation of TiO2from anatase to rutile and the growth of the crystallite sizes. XPS revealed that nitrogen and chlorine elements were incorporated into the lattice of TiO2through substituting the lattice oxygen atoms. DRS exhibited that the light absorption of N-Cl-TiO2in visible region was greatly improved. As a result, the band gap of TiO2was reduced to 2.12 eV. The photocatalytic activity of the as-synthesized TiO2was evaluated for the degradation of RhB and phenol under visible light irradiation. It was found that N-Cl-TiO2catalyst exhibited higher visible light photocatalytic activity than that of P25 TiO2and N-TiO2, which was attributed to the small crystallite size, intense light absorption in visible region, and narrow band gap.

scholarly journals Improved Visible Light Photocatalytic Activity for TiO2Nanomaterials by Codoping with Zinc and Sulfur

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Photoinduced Charge

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.

scholarly journals Hydrophobicity and Photocatalytic Activity of a Wood Surface Coated with a Fe3+-Doped SiO2/TiO2 Film

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2594 ◽  
Author(s):  
Luning Xuan ◽  
Yunlin Fu ◽  
Zhigao Liu ◽  
Penglian Wei ◽  
Lihong Wu
Keyword(s):  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Composite Film ◽  
Wood Surface ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Methyl Orange Solution ◽  
Crystal Form ◽  
Hydrophobic Property ◽  
X Ray

A Fe3+-doped SiO2/TiO2 composite film (Fe3+-doped STCF) was prepared on a wood surface via a sol–gel method to improve its photocatalytic activity and hydrophobicity. The structure of the composite film was analyzed by Fourier Transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity toward degradation of methyl orange and its hydrophobic nature were investigated. The results showed that the composite film was anatase TiO2 crystal form, and the addition of Fe3+ ions and SiO2 enhanced the diffraction peaks for the anatase crystal form. The photocatalytic activity of the wood coated with the composite film was enhanced. The highest degradation percentage was at 1 wt % Fe3+ (40.37%), and the degradation ability of the wood towards methyl orange solution was further improved under acidic conditions. In addition, the composite film was hydrophobic, and the hydrophobic property was enhanced as the immersion time in the sol increased. The wood surface coated with Fe3+-doped STCF exhibited strong hydrophobicity and photocatalytic activity, which could effectively prevent moisture from adhering to the surface and degrade organic pollutants; thus, the modified wood surface had good self-cleaning function.

Hydrothermal Treatment and its Influence on the Structure of Phosphorous Doped Titania

2011 ◽  
Vol 287-290 ◽  
pp. 1775-1778
Author(s):  
Si Yao Guo ◽  
Feng Fei Wang ◽  
Li Jiang ◽  
Dong Po He
Keyword(s):  
Photocatalytic Activity ◽  
Hydrothermal Method ◽  
Hydrothermal Treatment ◽  
Photoelectron Spectroscopy ◽  
Lattice Structure ◽  
Sol Gel ◽  
Xenon Lamp ◽  
X Ray ◽  
One Step ◽  
Doped Titania

P-doped titania was synthesized by a one step hydrothermal method and sol-gel method, which is characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The samples prepared by hydrothermal method demonstrate higher photocatalytic activity toward the degradation of methylene blue under xenon lamp which has similar spectra to solar light, and also is much superior to that of the commercial P25. The as prepared P-doped titania shows a small particle size (the minimum reaches to 4.5 nm). In addition, the samples prepared by hydrothermal treatment could severely influence the crystal lattice structure. Morever, P-doped titania can further enhacnce the photocatalytic activity effectively, and hydrothermal treatment is a very suitable method for the synthesis of P-doped titania. This excellent performance could endow the as-prepared P-doped titania potential in purifying wastewater.

Synthesis, Characterization and Photocatalytic Activity of Copper (II)-Doped Titanium Dioxide Powders

2011 ◽  
Vol 391-392 ◽  
pp. 728-731 ◽  
Author(s):  
Wen Churng Lin ◽  
Wein Duo Yang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Photoelectron Spectroscopy ◽  
Effective Means ◽  
Sol Gel ◽  
Particle Growth ◽  
X Ray ◽  
Surface Areas ◽  
Vis Spectroscopy

Different concentration of copper (II) doped TiO2 photocatalyst powders were synthesized through the sol-gel method and characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET)-specific surface area, transmission electron microscopy (TEM), and Ultraviolet–Visible (UV-Vis) spectroscopy. Cu2+-doping in the TiO2 promotes the particle growth, decreases the specific surface areas of powders, extends the absorption to visible light regions, and exhibits the vis-photocatalytic activity for methylene blue (MB) degradation. Appropriate content of Cu2+-doping is an effective means to improve the photocatalytic activity of TiO2 for MB degradation under visible light irradiation.

Sign in / Sign up

Export Citation Format

Share Document