scholarly journals Enhancing the performance of membrane distillation and ion-exchange manganese oxide for recovery of water and lithium from seawater

2020 ◽  
Vol 396 ◽  
pp. 125386 ◽  
Author(s):  
Sharaniya Roobavannan ◽  
Saravanamuthu Vigneswaran ◽  
Gayathri Naidu
2020 ◽  
Vol 15 (3) ◽  
pp. 551-570
Author(s):  
Eric Mutegoa ◽  
Askwar Hilonga ◽  
Karoli N. Njau

Abstract The digestion process of organic waste rich in high ammonia content has always been a gridlock during the methanogenesis process. The free ammonia may increase inhibition/toxicity, which in turn affects the microbial community in the digester and eventually leads to process failures. Substantial methods have been proposed and assessed for curtailing ammonia emissions in anaerobic digesters to attain a safe and steady process so that, along with high methane production, high quality effluents can also be recovered. There are several means for lowering the erratic ammonia in organic wastes that are in use currently, such as decrease of pH, which favours the formation of ammonium over ammonia in the equilibrium; for example, the use of chemical additives that attach ammonium-N. Ammonia can also be removed from nitrogen-rich substrates during anaerobic digestion through other methods such as struvite precipitation, membrane distillation, air stripping, ion exchange, and adsorption. A thorough survey of different articles has shown that ion exchange, adsorption and changing of the C/N ratio through the co-digestion technique are the most commonly studied methods for mitigating ammonia inhibition in wastewater during anaerobic digestion. A detailed review of these methods in the context of nitrogen-rich substrates will be discussed in this paper.


2018 ◽  
Vol 261 ◽  
pp. 42-48 ◽  
Author(s):  
Jinju Song ◽  
Jihyeon Gim ◽  
Sohyun Park ◽  
Jaekook Kim

Langmuir ◽  
1991 ◽  
Vol 7 (6) ◽  
pp. 1167-1171 ◽  
Author(s):  
Kenta. Ooi ◽  
Yoshitaka. Miyai ◽  
Jitsuo. Sakakihara

2004 ◽  
Vol 449-452 ◽  
pp. 277-280 ◽  
Author(s):  
Kang Sup Chung ◽  
Jae Chun Lee ◽  
Eun Jin Kim ◽  
Kyung Chul Lee ◽  
Yang Soo Kim ◽  
...  

Adsorbing and salvaging extremely small quantities of lithium ion, high-performance ion-exchange type lithium ion adsorbent was prepared through the ion-sieve formation method. The method uses acid treatment after the synthesis of spinel-structured nano-Li1.33Mn1.67O4 precursor through the tartaric acid gel process. It has good selectivity and high efficiency in adsorbing lithium ion in seawater. The generated adsorbent showed a 28.2 mg/g lithium uptake from artificial seawater. This adsorbent further showed a difference reproducibility that was lower than 10% when subjected to five cycles of adsorption and desorption experiments.


RSC Advances ◽  
2015 ◽  
Vol 5 (109) ◽  
pp. 90150-90157 ◽  
Author(s):  
Yu Zhang ◽  
Zhi Su ◽  
Xiang Yao ◽  
YingBo Wang

A series of monoclinic fluorine-doped lithium manganese oxide (LixMnO2−yFy) were prepared by the ion exchange of sodium for lithium in NaxMnO2−yFy precursors that were obtained using a high-temperature solid-state reaction.


Membranes ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 262
Author(s):  
Maryam Haddad ◽  
Laurent Bazinet ◽  
Benoit Barbeau

Despite the tremendous success of the application of anion exchange resins (IX) in natural organic matter (NOM) removal over conventional removal methods, the considerable amount of brine spent during its regeneration cycle makes its sustainability questionable. This polluting saline stream can be challenging to manage and costly to discharge. Alternatively, and with the recent shift in perception of resource recovery, the produced spent brine can no longer be seen as a polluting waste but as an unconventional source of water, minerals and nutrients. In this research, for the first time, we evaluated the effectiveness of an integrated monovalent selective electrodialysis (MSED) and direct contact membrane distillation (DCMD) system in IX spent brine desalination and resource recovery. Of particular interest were the effects of operating time on the characteristics of the monovalent permselective ion exchange membranes, the impact of the DCMD stack configuration on minimizing heat loss to the ambient environment and the efficacy of the recovered NaCl in the regenerating cycle of the exhausted IXs. Our findings demonstrated that although the recovered NaCl from the stand-alone MSED can restore nearly 60% ion exchange capacity of the exhausted IXs, coupling MSED with DCMD led to minimizing the consumption of fresh NaCl (in the IX regeneration cycle) significantly, the potential application of NOM in agriculture and diminishing the risk of the IX spent brine disposal. In addition, the initial characteristics of the ion permselective membranes were maintained after 24 h of MSED and the transmembrane flux was increased when the feed/hot compartment (in the DCMD stack) was encapsulated on two outer ends with coolant/permeate compartments as a result of less heat loss to the ambient environment.


Sign in / Sign up

Export Citation Format

Share Document