Flexible and quasi-isotropically thermoconductive polyimide films by guided assembly of boron nitride nanoplate/boron nitride flakes for microelectronic application

Commercial polyimide films have shown to be homogeneous on a scale of 5 to 200 nm. The observation of Skybond (SKB) 705 and PI5878 was carried out by using a Philips 400, 120 KeV STEM. The objective was to elucidate the structural features of the polymeric samples. The specimens were spun and cured at stepped temperatures in an inert atmosphere and cooled slowly for eight hours. TEM micrographs showed heterogeneities (or nodular structures) generally on a scale of 100 nm for PI5878 and approximately 40 nm for SKB 705, present in large volume fractions of both specimens. See Figures 1 and 2. It is possible that the nodulus observed may be associated with surface effects and the structure of the polymers be regarded as random amorphous arrays. Diffraction patterns of the matrix and the nodular areas showed different amorphous ring patterns in both materials. The specimens were viewed in both bright and dark fields using a high resolution electron microscope which provided magnifications of 100,000X or more on the photographic plates if desired.

Download Full-text

Development of Crystallinity in Turbostratic Boron Nitride Derived from Polymeric Precursors

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089081 ◽

1991 ◽

Vol 49 ◽

pp. 954-955

Author(s):

X. Qiu ◽

A. K. Datye ◽

T. T. Borek ◽

R. T. Paine

Keyword(s):

Thermal Treatment ◽

Boron Nitride ◽

Diffraction Pattern ◽

Polymeric Precursors ◽

Polymer Precursors ◽

Diffuse Ring

Boron nitride derived from polymer precursors is of great interest for applications such as fibers, coatings and novel forms such as aerogels. The BN is prepared by the polymerization of functionalized borazine and thermal treatment in nitrogen at 1200°C. The BN powders obtained by this route are invariably trubostratic wherein the sheets of hexagonal BN are randomly oriented to yield the so-called turbostratic modification. Fib 1a and 1b show images of BN powder with the corresponding diffraction pattern in fig. 1c. The (0002) reflection from BN is seen as a diffuse ring with occational spots that come from crystals of BN such as those shown in fig. 1b. The (0002) lattice fringes of BN seen in these powders are the most characteristic indication of the crystallinity of the BN.

Download Full-text

Structural relationships in the synthesis of cubic boron nitride thin films by ion-assisted deposition

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010017092x ◽

1994 ◽

Vol 52 ◽

pp. 638-639

Author(s):

D. L. Medlin ◽

T. A. Friedmann ◽

P. B. Mirkarimi ◽

M. J. Mills ◽

K. F. McCarty

Keyword(s):

Boron Nitride ◽

Ion Irradiation ◽

Cubic Boron Nitride ◽

Film Stress ◽

Bonded Phases ◽

Structural Relationships ◽

Precursor Material ◽

Pressure Synthesis ◽

Microstructure Of The Material

The allotropes of boron nitride include two sp2-bonded phases with hexagonal and rhombohedral structures (hBN and rBN) and two sp3-bonded phases with cubic (zincblende) and hexagonal (wurtzitic) structures (cBN and wBN) (Fig. 1). Although cBN is synthesized in bulk form by conversion of hBN at high temperatures and pressures, low-pressure synthesis of cBN as a thin film is more difficult and succeeds only when the growing film is simultaneously irradiated with a high flux of ions. Only sp2-bonded material, which generally has a disordered, turbostratic microstructure (tBN), will form in the absence of ion-irradiation. The mechanistic role of the irradiation is not well understood, but recent work suggests that ion-induced compressive film stress may induce the transformation to cBN.Typically, BN films are deposited at temperatures less than 1000°C, a regime for which the structure of the sp2-bonded precursor material dictates the phase and microstructure of the material that forms from conventional (bulk) high pressure treatment.

Download Full-text