Removal of methanol from pulp and paper mills using combined activated carbon adsorption and photocatalytic regeneration

Chemosphere ◽  
2006 ◽  
Vol 65 (1) ◽  
pp. 35-42 ◽  
Author(s):  
Yong Tao ◽  
Chang-Yu Wu ◽  
David W. Mazyck
RSC Advances ◽  
2017 ◽  
Vol 7 (16) ◽  
pp. 9754-9763 ◽  
Author(s):  
Bholu Ram Yadav ◽  
Anurag Garg

The present study reports the performance of catalytic wet oxidation (CWO) for the treatment of simulated pulping effluents (with chemical oxygen demand (COD) = 15 000 and 17 000 mg L−1) from large and small scale pulp and paper mills, respectively.


TAPPI Journal ◽  
2018 ◽  
Vol 17 (03) ◽  
pp. 167-178 ◽  
Author(s):  
Xin Tong ◽  
Jiao Li ◽  
Jun Ma ◽  
Xiaoquan Chen ◽  
Wenhao Shen

Studies were undertaken to evaluate gaseous pollutants in workplace air within pulp and paper mills and to consider the effectiveness of photo-catalytic treatment of this air. Ambient air at 30 sampling sites in five pulp and paper mills of southern China were sampled and analyzed. The results revealed that formaldehyde and various benzene-based molecules were the main gaseous pollutants at these five mills. A photo-catalytic reactor system with titanium dioxide (TiO2) was developed and evaluated for degradation of formaldehyde, benzene and their mixtures. The experimental results demonstrated that both formaldehyde and benzene in their pure forms could be completely photo-catalytic degraded, though the degradation of benzene was much more difficult than that for formaldehyde. Study of the photo-catalytic degradation kinetics revealed that the degradation rate of formaldehyde increased with initial concentration fitting a first-order kinetics reaction. In contrast, the degradation rate of benzene had no relationship with initial concentration and degradation did not conform to first-order kinetics. The photo-catalytic degradation of formaldehyde-benzene mixtures indicated that formaldehyde behaved differently than when treated in its pure form. The degradation time was two times longer and the kinetics did not reflect a first-order reaction. The degradation of benzene was similar in both pure form and when mixed with formaldehyde.


2012 ◽  
Vol 11 (1) ◽  
pp. 81-85 ◽  
Author(s):  
Dan Gavrilescu ◽  
Adrian Catalin Puitel ◽  
Gheorghe Dutuc ◽  
Grigore Craciun

1988 ◽  
Vol 20 (1) ◽  
pp. 37-48 ◽  
Author(s):  
L. Panneerselvam

In order to reduce the demand for the forest based raw materials by the organised industrial sectors like the large integrated pulp and paper mills, the Government of India started promoting several small-scale pulp and paper mills based on non-wood agricultural residue raw materials. However promotion of these small mills has created another environmental problem i.e. severe water pollution due to non-recovery of chemicals. Because of the typical characteristics like high silica content etc. of the black liquor produced and the subsequent high capital investment needed for a recovery system, it is not economically feasible for the small Indian mills to recover the chemicals. While the quantity of wastewater generated per tonne of paper produced by a small mill is same as from a large integrated pulp and paper mill with a chemical recovery system, their BOD load is four times higher, due to non recovery of chemicals. However the existing wastewater disposal standards are uniform for large and small mills for e.g. 30 mg BOD/l. To meet these standards, the small mills have to install a capital intensive wastewater treatment plant with heavy recurring operating costs. Therefore the feasible alternative is to implement various pollution abatement measures, with the objective of not only reducing the fibre/chemical loss but also to reduce the investment and operating costs of the final wastewater treatment system. To illustrate this approach, a case study on water pollution abatement and control in a 10 TPD mill, will be discussed.


1994 ◽  
Vol 29 (8) ◽  
pp. 221-233
Author(s):  
Shimshon Belkin ◽  
Asher Brenner ◽  
Alon Lebel ◽  
Aharon Abeliovich

A case study is presented, in which two approaches to the treatment of complex chemical wastewater are experimentally compared: an end-of-pipe “best available technology” option and an in-plant source segregation program. Both options proved to be feasible. Application of the powdered activated carbon treatment (PACT™) process for the combined end-of-pipe stream yielded up to 93% reduction of dissolved organic carbon, with complete toxicity elimination. In order to examine the potential for applying a conventional activated sludge process, a simplified laboratory screening procedure was devised, aimed at establishing baseline data of removability potential, defined either by biodegradation, activated carbon adsorption or volatilization. Using this procedure, the major source of the non-biodegradable fraction in the combined park's wastewater was traced to a single factory, from which twelve individual source streams were screened. The results allowed the division of the tested sources into three groups: degradable, volatile, and problematic. A modified wastewater segregation and treatment program was accordingly proposed, which should allow an efficient and environmentally acceptable solution. This program is presently at its final testing stages, at the conclusion of which a full comparison between the two approaches will be carried out.


1997 ◽  
Vol 35 (2-3) ◽  
pp. 101-108
Author(s):  
X. Wang ◽  
T. H. Mize ◽  
F. M. Saunders ◽  
S. A. Baker

Research is focused on an integrated way to simultaneously optimize the bleaching operations and subsequent wastewater treatment for pulp and paper mills. Bleach wastewaters from ClO2-bleached pulping studies at Institute of Paper Science and Technology (IPST) were used as the feed for batch reactors to test and rank the treatability and kinetics. The key aspect of the system is the use of sequential anaerobic/aerobic phases to enhance reductive dehalogenation of chloro-organic materials. Two continuous reactor systems, one operated in an anaerobic-aerobic mode and a second in an aerobic-aerobic mode, received bleaching wastewater obtained from a full-scale plant. Acclimated cultures from both continuous reactors were used to quantify the AOX (Adsorbable Organic Halide) and COD removal from various bleaching wastewaters. In general, the sequential anaerobic/aerobic treatment of bleach wastewater can improve both biotreatability and degradation rates.


1998 ◽  
Vol 32 (6) ◽  
pp. 1841-1851 ◽  
Author(s):  
Lois J. Uranowski ◽  
Charles H. Tessmer ◽  
Radisav D. Vidic

Sign in / Sign up

Export Citation Format

Share Document