Novel design of lubricant-type vacuum distillation process for lube base oils production from hydrocracking tail oil

Author(s):  
Hui Pan ◽  
Xinshuang Li ◽  
Yichao Shen ◽  
Xiang Wu ◽  
Feng Ju ◽  
...  
Tehnika ◽  
2014 ◽  
Vol 69 (1) ◽  
pp. 58-62 ◽  
Author(s):  
Vladislav Lj. Matković ◽  
Vaso D. Manojlović ◽  
Miroslav D. Sokić ◽  
Branislav R. Marković ◽  
Zvonko P. Gulišija ◽  
...  

2011 ◽  
Vol 311-313 ◽  
pp. 1573-1576
Author(s):  
Hong Li ◽  
Yong Li Zhang

Key words:Atmospheric and vacuum; distillation; process; pollution Abstract:The atmospheric and vacuum distillation unit was analysed on the device's size, composition, technical route and process. The results show that the flue gas produced by atmospheric and vacuum furnace is the main emission source, and the main pollutants in the flue gas are SO2, NOX and soot. The wastewater pollution is mainly electric desalting salt water, and it was treated in saline wastewater treatment plant in the factory.


RSC Advances ◽  
2016 ◽  
Vol 6 (1) ◽  
pp. 796-804 ◽  
Author(s):  
Chuanzhang Ge ◽  
Haixiao Yang ◽  
Jitong Wang ◽  
Wenming Qiao ◽  
Donghui Long ◽  
...  

A facile vacuum distillation process is proposed for the fractionation of ethylene tar to realize its highly effective utilization. Potential market can be stimulated by the developing of high-purity chemicals and high value carbon materials.


Author(s):  
Tat'yana Raskulova ◽  
Mihail Fereferov ◽  
Elena Cheklaukova

Results of technical and economic calculations of the translation of the block of vacuum distillation of fuel oil of the ELOU-AVT-6 installation with replacement of the two-columned scheme of the W block on one-columned with receiving vacuum distillates as base oils are presented in the report.


Vacuum ◽  
2021 ◽  
pp. 110172
Author(s):  
Zhengen Zhou ◽  
Dachun Liu ◽  
Heng Xiong ◽  
Chengyan Wang ◽  
Baozhong Ma ◽  
...  

2013 ◽  
Vol 5 (2) ◽  
pp. 147-152
Author(s):  
Karabayev Jalal Abdukhametovich ◽  
Tanashev Seytkali Tanashevich ◽  
Sakibayeva Saule Abdrazakovna ◽  
Tasanbayeva Nurzhamal Egemkulovna ◽  
Iskendirov Bolat Zharylkapovich ◽  
...  

2011 ◽  
Vol 335-336 ◽  
pp. 899-903 ◽  
Author(s):  
Li Min Yang ◽  
Hong Hui Zhang ◽  
Jia Hao Wang ◽  
Min Hu

Polymerizable C9 fraction was cut by atmospheric distillation of raw C9 fraction from thermal cracking. The obtained fraction polymerized using boron trifluoride ethyl ether as catalyst and then the polymerized mixture was washed by warm 10%wt Na2CO3 aqueous solution and distilled water and separated by vacuum distillation for producing light colored C9 petroleum resins with high softening point. The suitable conditions for polymerization process, washing process, vacuum distillation process were investigated to improve the C9 petroleum resins production. Under these conditions, the petroleum resins product with Gardner color index of 4-5 and softening point of 102-120°C could be obtained.


Sign in / Sign up

Export Citation Format

Share Document