Flame retardant properties of waterborne epoxy intumescent coatings reinforced by polydopamine@KH560/carbon nitride/graphene ternary system

Author(s):  
Chunlin Chen ◽  
Shaotang Dong ◽  
Guoqing Xiao ◽  
Fei Zhong ◽  
Zhengwei Yang ◽  
...  
Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1708 ◽  
Author(s):  
Wang ◽  
Teng ◽  
Yang ◽  
You ◽  
Zhang ◽  
...  

In this article, the intumescent flame-retardant microsphere (KC-IFR) was prepared by inverse emulsion polymerizations, with the use of k-carrageenan (KC) as carbon source, ammonium polyphosphate (APP) as acid source, and melamine (MEL) as gas source. Meanwhile, benzoic acid functionalized graphene (BFG) was synthetized as a synergist. A “four-source flame-retardant system” (KC-IFR/BFG) was constructed with KC-IFR and BFG. KC-IFR/BFG was blended with waterborne epoxy resin (EP) to prepare flame-retardant coatings. The effects of different ratios of KC-IFR and BFG on the flame-retardant properties of EP were investigated. The results showed that the limiting oxygen index (LOI) values increased from 19.7% for the waterborne epoxy resin to 28.7% for the EP1 with 20 wt% KC-IFR. The addition of BFG further improved the LOI values of the composites. The LOI value reached 29.8% for the EP5 sample with 18 wt% KC-IFR and 2 wt% BFG and meanwhile, UL-94 test reached the V-0 level. In addition, the peak heat release (pHRR) and smoke release rate (SPR) of EP5 decreased by 63.5% and 65.4% comparing with EP0, respectively. This indicated the good flame-retardant and smoke suppression property of EP composites coating.


2015 ◽  
Vol 3 (33) ◽  
pp. 17064-17073 ◽  
Author(s):  
Yongqian Shi ◽  
Ze Long ◽  
Bin Yu ◽  
Keqing Zhou ◽  
Zhou Gui ◽  
...  

Significant improvements in thermal and flame retardant properties of polymeric materials at low loadings hold tremendous promise for fire safety materials.


Author(s):  
Н. А. Таран ◽  
К. В. Калафат ◽  
Л. І. Вахітова ◽  
В. П. Плаван

Study of the effect of intumescent complex compounds on the basis of aminoderivatives of 2,4,8,10-tetraoxа-3,9-diphosphaspiro[5,5] undecane on the flame retardant properties and water resistance of the ethylene vinyl acetate copolymer in the flame retardant polymer compositions. The structure of intumescent compounds has been confirmed by the methods of elemental analysis and IR spectroscopy, the flame retardant properties of the intumescent systems have been investigated using the method of thermogravimetric analysis. Methods of synthesis of intumescent compounds based on 2,4,8,10-tetraoxа-3,9-diphosphaspiro[5,5]undecane and urea, melamine, dicyandiamidе and mixtures there of have been developed. The synthesized compounds have been shown to enhance the flame retardant properties of the ethylene vinyl acetate copolymer, exhibit an intumescent effect and participate in the construction of a char thermal insulation layer. It has been shown that the water resistance of fire retardant systems with the participation of intumescent complex compounds is much higher than the systems of ammonium polyphosphate / melamine / pentaerythritol composition. The expansion coefficient of intumescent systems containing of intumescent compounds to decrease by 10 - 20% after hydrothermal effects, while, as the expansion coefficient of the traditional intumescent system  in the same conditions is reduced by 40%. According to the results of accelerated hydrothermal tests, the stability of polymeric intumescent coatings with the participation of intumescent complex compounds to the action of moisture under conditions of temperature difference was determined. The obtained results indicate the prospect of using the investigated intumescent compounds for the creation of new technologies of intumescent coatings for wood with a long operation life.


Author(s):  
Xin Chen ◽  
Junkang Guo ◽  
Limei Ren ◽  
Shenyong Ren ◽  
Baojian Shen ◽  
...  

2021 ◽  
Author(s):  
Nicole Ziegenbalg ◽  
Ruth Lohwasser ◽  
Giovanni D’Andola ◽  
Torben Adermann ◽  
Johannes Christopher Brendel

Polyethersulfones are an interesting class of polymers for industrial applications due to their unusual properties such as a high refractive index, flame-retardant properties, high temperature and chemical resistance. The common...


Sign in / Sign up

Export Citation Format

Share Document