A computational model for reinforced concrete members confined with fiber reinforced polymer lamina: Implementation and experimental validation

2007 ◽  
Vol 38 (5-6) ◽  
pp. 598-613 ◽  
Author(s):  
Khalid M. Mosalam ◽  
Mohamed Talaat ◽  
Baris Binici
Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 696 ◽  
Author(s):  
Alireza Javadian ◽  
Ian F. C. Smith ◽  
Dirk E. Hebel

Reinforced concrete is the most widely used building material in history. However, alternative natural and synthetic materials are being investigated for reinforcing concrete structures, given the limited availability of steel in developing countries, the rising costs of steel as the main reinforcement material, the amount of energy required by the production of steel, and the sensitivity of steel to corrosion. This paper reports on a unique use of bamboo as a sustainable alternative to synthetic fibers for production of bamboo fiber-reinforced polymer composite as reinforcement for structural-concrete beams. The aim of this study is to evaluate the feasibility of using this novel bamboo composite reinforcement system for reinforced structural-concrete beams. The bond strength with concrete matrix, as well as durability properties, including the water absorption and alkali resistance of the bamboo composite reinforcement, are also investigated in this study. The results of this study indicate that bamboo composite reinforced concrete beams show comparable ultimate loads with regards to fiber reinforced polymer (FRP) reinforced concrete beams according to the ACI standard. Furthermore, the results demonstrate the potential of the newly developed bamboo composite material for use as a new type of element for non-deflection-critical applications of reinforced structural-concrete members. The design guidelines that are stated in ACI 440.1R-15 for fiber reinforced polymer (FRP) reinforcement bars are also compared with the experimental results that were obtained in this study. The American Concrete Institute (ACI) design guidelines are suitable for non-deflection-critical design and construction of bamboo-composite reinforced-concrete members. This study demonstrates that there is significant potential for practical implementation of the bamboo-composite reinforcement described in this paper. The results of this study can be utilized for construction of low-cost and low-rise housing units where the need for ductility is low and where secondary-element failure provides adequate warning of collapse.


2000 ◽  
Vol 27 (5) ◽  
pp. 993-1004 ◽  
Author(s):  
Mamdouh M Elbadry ◽  
Hany Abdalla ◽  
Amin Ghali

Thermal characteristics of fiber reinforced polymer (FRP) reinforcement can be substantially different from those of concrete and conventional steel reinforcement. The influence of this difference on the behaviour of FRP reinforced concrete members is studied in this paper. Concrete beams reinforced with different types of FRP rebars are tested under the effects of temperature gradient while the rotation at the two ends of the beam are restrained. The bending moments and cracking developed by the thermal gradient are monitored. The results are compared with those obtained from tests on beams of the same dimensions but reinforced with steel bars. The behaviour of thermally cracked members is also investigated under mechanical load effects at both service and ultimate load levels. The potential cracking of the concrete cover caused by the transverse thermal expansion of FRP bars is examined by testing concrete cylinders. The experiments show the difference in thermal behaviour of glass and carbon FRP and steel bars.Key words: bond, concrete, cracking (fracturing), fiber reinforced polymers, loads (forces), reinforcement, temperature, tensile strength, thermal expansion, thermal stresses.


Structures ◽  
2021 ◽  
Vol 33 ◽  
pp. 1868-1877
Author(s):  
Ahmed H. Ali ◽  
Hamdy M. Mohamed ◽  
Brahim Benmokrane

Sign in / Sign up

Export Citation Format

Share Document