Hollow polymeric microsphere-filled silicone-modified epoxy as an internally insulated material for composite cross-arm applications

2020 ◽  
Vol 200 ◽  
pp. 108418
Author(s):  
Yunpeng Liu ◽  
Le Li ◽  
Hechen Liu ◽  
Mingjia Zhang ◽  
Aijing Liu ◽  
...  
Keyword(s):  
Polymeric Microsphere ◽  
Modified Epoxy

Determination of Hydroxy Groups in the Modified Epoxy Oligomers Using IR-Spectroscopy

2015 ◽  
Vol 9 (4) ◽  
pp. 411-416 ◽  
Author(s):  
Ostap Ivashkiv ◽  
◽  
Piotr Bruzdziak ◽  
Olena Shyshchak ◽  
Jacek Namiesnik ◽  
...  
Keyword(s):  
Ir Spectroscopy ◽  
Epoxy Oligomers ◽  
Hydroxy Groups ◽  
Modified Epoxy

The Mechanical Properties of Organic Modified Epoxy Resin

2020 ◽  
Vol 43 (3) ◽  
pp. 10-14
Author(s):  
Georgel MIHU ◽  
Claudia Veronica UNGUREANU ◽  
Vasile BRIA ◽  
Marina BUNEA ◽  
Rodica CHIHAI PEȚU ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Epoxy Resin ◽  
Epoxy Matrix ◽  
Epoxy Resins ◽  
Mechanical Tests ◽  
Organic Modification ◽  
Three Point Bending ◽  
Modified Epoxy

Epoxy resins have been presenting a lot of scientific and technical interests and organic modified epoxy resins have recently receiving a great deal of attention. For obtaining the composite materials with good mechanical proprieties, a large variety of organic modification agents were used. For this study gluten and gelatin had been used as modifying agents thinking that their dispersion inside the polymer could increase the polymer biocompatibility. Equal amounts of the proteins were milled together and the obtained compound was used to form 1 to 5% weight ratios organic agents modified epoxy materials. To highlight the effect of these proteins in epoxy matrix mechanical tests as three-point bending and compression were performed.

scholarly journals Hydrophobic Modification of Graphene Oxide and Its Effect on the Corrosion Resistance of Silicone-Modified Epoxy Resin

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 89
Author(s):  
Wei Yuan ◽  
Qian Hu ◽  
Jiao Zhang ◽  
Feng Huang ◽  
Jing Liu
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Graphene Oxide ◽  
Physical Properties ◽  
Epoxy Resin ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
X Ray ◽  
Modified Graphene Oxide ◽  
Modified Epoxy

This study modified graphene oxide (GO) with hydrophilic octadecylamine (ODA) via covalent bonding to improve its dispersion in silicone-modified epoxy resin (SMER) coatings. The structural and physical properties of ODA-GO were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle tests. The ODA-GO composite materials were added to SMER coatings by physical mixing. FE-SEM, water absorption, and contact angle tests were used to evaluate the physical properties of the ODA-GO/SMER coatings, while salt spray, electrochemical impedance spectroscopy (EIS), and scanning Kelvin probe (SKP) methods were used to test the anticorrosive performance of ODA-GO/SMER composite coatings on Q235 steel substrates. It was found that ODA was successfully grafted onto the surfaces of GO. The resulting ODA-GO material exhibited good hydrophobicity and dispersion in SMER coatings. The anticorrosive properties of the ODA-GO/SMER coatings were significantly improved due to the increased interfacial adhesion between the nanosheets and SMER, lengthening of the corrosive solution diffusion path, and increased cathodic peeling resistance. The 1 wt.% ODA-GO/SMER coating provided the best corrosion resistance than SMER coatings with other amounts of ODA-GO (including no addition). After immersion in 3.5 wt.% NaCl solution for 28 days, the low-frequency end impedance value of the 1 wt.% ODA-GO/SMER coating remained high, at 6.2 × 108 Ω·cm2.

scholarly journals Assess the Effectiveness of protective Concrete coatings of microbiological sulfuric acid Aggression

2019 ◽  
Vol 97 ◽  
pp. 02022
Author(s):  
Viktor Sopov ◽  
Julia Danchenko ◽  
Ekaterina Latorez
Keyword(s):  
Sulfuric Acid ◽  
Building Structures ◽  
Predominant Role ◽  
Microbiological Processes ◽  
Repair Materials ◽  
Bactericidal Properties ◽  
Mineral Acids ◽  
Concrete Building ◽  
Modified Epoxy

Specification of corrosion processes in sewerage networks, the predominant role of microbiological processes in them requires the protection of concrete with materials resistant to specific biogenic sulfuric acid aggression. The effective protective materials, in this case, are those that, in addition to acid-proofing materials, have bactericidal properties. Polymer composite materials (PCM) of cold curing based on modified epoxy-resin, resins with dispersed oxides as fillers are widely used in construction. Unique properties and simple technologies make it possible to use them as injection formulations for repair, restoration and restoration of building structures and structures, waterproofing and facing materials, for impregnating, gluing and coating metal, wooden, brick and concrete building structures and parts. In the reconstruction and restoration of sewerage collectors operating under conditions of exposure to liquid biochemically aggressive media with mineral acids and organic substances, particular attention is paid to the permeability of repair materials. Based on the results of the study, PCM compositions were chosen whose estimated lifetime is about 20 years, ensuring reliable protection of the sewage collectors from corrosion.

Block Copolymer and Nanosilica-Modified Epoxy Nanocomposites

2021 ◽  
Author(s):  
Vincent Pang ◽  
Zachary J. Thompson ◽  
Guy D. Joly ◽  
Lorraine F. Francis ◽  
Frank S. Bates
Keyword(s):  
Block Copolymer ◽  
Epoxy Nanocomposites ◽  
Modified Epoxy
Sign in / Sign up

Export Citation Format

Share Document