Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations

2009 ◽  
Vol 88 (4) ◽  
pp. 532-541 ◽  
Author(s):  
H. Bakaiyan ◽  
H. Hosseini ◽  
E. Ameri
Keyword(s):  
Internal Pressure ◽  
Thermomechanical Loading ◽  
Filament Wound ◽  
Filament Wound Composite ◽  
Composite Pipes ◽  
Wound Composite

Analysis of multi-layered filament-wound composite pipes under internal pressure

2001 ◽  
Vol 53 (4) ◽  
pp. 483-491 ◽  
Author(s):  
M. Xia ◽  
H. Takayanagi ◽  
K. Kemmochi
Keyword(s):  
Internal Pressure ◽  
Filament Wound ◽  
Filament Wound Composite ◽  
Composite Pipes ◽  
Wound Composite

Material characterization of filament-wound composite pipes

2018 ◽  
Vol 206 ◽  
pp. 474-483 ◽  
Author(s):  
William Toh ◽  
Long Bin Tan ◽  
Kwong Ming Tse ◽  
Anthoni Giam ◽  
Karthikayen Raju ◽  
...  
Keyword(s):  
Material Characterization ◽  
Filament Wound ◽  
Filament Wound Composite ◽  
Composite Pipes ◽  
Wound Composite

Prediction of Bending Strength for Filament-Wound Composite Pipes

2003 ◽  
Vol 22 (8) ◽  
pp. 695-710 ◽  
Author(s):  
T. Natsuki ◽  
H. Takayanagi ◽  
H. Tsuda ◽  
K. Kemmochi
Keyword(s):  
Bending Strength ◽  
Filament Wound ◽  
Filament Wound Composite ◽  
Composite Pipes ◽  
Wound Composite

Residual failure pressures and fatigue life of filament-wound composite pipes subjected to lateral impact

2011 ◽  
Vol 46 (15) ◽  
pp. 1787-1794 ◽  
Author(s):  
Murat Sari ◽  
Ramazan Karakuzu ◽  
Mehmet Emin Deniz ◽  
Bulent Murat Icten
Keyword(s):  
Fatigue Life ◽  
Lateral Impact ◽  
Filament Wound ◽  
Filament Wound Composite ◽  
Composite Pipes ◽  
Wound Composite

Fatigue failure analysis of surface-cracked (±45°)3 filament-wound GRP pipes under internal pressure

2011 ◽  
Vol 46 (9) ◽  
pp. 1041-1050 ◽  
Author(s):  
A Samanci ◽  
N Tarakçioğlu ◽  
A Akdemir
Keyword(s):  
Internal Pressure ◽  
Surface Crack ◽  
Fatigue Behavior ◽  
Load Ratio ◽  
Axial Direction ◽  
Filament Wound ◽  
Reinforced Plastic ◽  
Filament Wound Composite ◽  
Stress Whitening ◽  
Composite Pipes

In this study, the fatigue behavior of (±45°)3 filament-wound composite pipes with a surface crack under alternating internal pressure was investigated. Glass-reinforced plastic (GRP) pipes were made of E-glass/epoxy and tested in the open-ended condition. The pipes had a surface crack with a notch–aspect ratio of a/c = 0.2 and notch-to-thickness ratios of a/t = 0.25, 0.38, or 0.50 in the axial direction. Tests were carried out in accordance with ASTM D2992. This standard offers 25 cycles/min and a load ratio of R = 0.05. Tests were performed at three different load levels: 50%, 40%, and 30% of ultimate hoop stress. Whitening, leakage, and final failure of GRP pipes were observed, and fatigue test results were presented by means of S–N curves.

Sign in / Sign up

Export Citation Format

Share Document