Grain sizes retained by diatom biofilms during erosion on tidal flats linked to bed sediment texture

2015 ◽  
Vol 104 ◽  
pp. 37-44 ◽  
Author(s):  
Jessica C. Garwood ◽  
Paul S. Hill ◽  
Hugh L. MacIntyre ◽  
Brent A. Law
2018 ◽  
Vol 25 (1-2) ◽  
Author(s):  
Tereza Macurová ◽  
Václav Škarpich ◽  
Tomáš Galia

High-gradient streams are integral parts of the fluvial systems, which connect the mountainous landscapes with lowland rivers in the sense of water and sediment transport. We analysed downstream grain-size characteristics of bed sediments and sphericity of grains with respect to the local flysch lithology and channel geometry in the 5.4 km long reach of the high-gradient Kobylská Stream (the Vsetín highlands, Outer Western Carpathians, Czech Republic). Results showed a high variability of bed-sediment sizes in the longitudinal course of the Kobylská stream. This condition is given by the occurrence of anthropogenic impact in the studied channel (local bank stabilisations, grade-control structures) and lateral sediment input from the adjacent landslides and bank failures. The lithology of the flysch nappe structure of the basin significantly influenced variations of bed sediment grain-sizes. Different bedrock resistance resulted into inverse correlation between the local river gradient and related bed grain-sizes. Especially the mudstone bedrock layers had significant impact on the fining of bed sediment in the upper steep part of the basin (D50 ≤ 40 mm) and by contrast, sandstone bedrock caused the coarsening of the bed sediment in the middle and lower parts (D50 up to 50 mm) characterised by lower bed gradients.


Author(s):  
Z.L. Wang ◽  
J. Bentley ◽  
R.E. Clausing ◽  
L. Heatherly ◽  
L.L. Horton

It has been found that the abrasion of diamond-on-diamond depends on the crystal orientation. For a {100} face, the friction coefficient for sliding along <011> is much higher than that along <001>. For a {111} face, the abrasion along <11> is different from that in the reverse direction <>. To interpret these effects, a microcleavage mechanism was proposed in which the {100} and {111} surfaces were assumed to be composed of square-based pyramids and trigonal protrusions, respectively. Reflection electron microscopy (REM) has been applied to image the microstructures of these diamond surfaces.{111} surfaces of synthetic diamond:The synthetic diamonds used in this study were obtained from the De Beers Company. They are in the as-grown condition with grain sizes of 0.5-1 mm without chemical treatment or mechanical polishing. By selecting a strong reflected beam in the reflection high-energy electron diffraction (RHEED) pattern, the dark-field REM image of the surface is formed (Fig. 1).


2000 ◽  
Vol 28 (3) ◽  
pp. 178-195 ◽  
Author(s):  
N. Amino ◽  
Y. Uchiyama

Abstract In this study, the relationships between friction and viscoelastic properties such as loss tangent tan δ and storage modulusE′ were examined. Wet skid resistance was measured using the British Pendulum Tester. The rubber specimens were rubbed againstfive silicone carbide cloths of differing abrasive grain sizes. The viscoelastic properties of the rubber specimens were measured with a viscoelasticspectrometer. From the data on wet skid resistance and viscoelastic properties, it is found that the coefficient of friction μ varies as follows:           μ = a + b · tan δ/E′ where a and b are constants. Tan δ/E′ was related to the hysteresis term of friction, and the μ-frequency curves were compared with the tan δ/E′ –frequency curves.


Author(s):  
Dmitry Korzinin ◽  
Dmitry Korzinin ◽  
Igor Leontiev ◽  
Igor Leontiev

Modelling study of the equilibrium profiles formed on sandy coasts of different bed slopes and grain sizes under the various wave conditions was realized by using the CROSS-P and Xbeach morphodynamic models. A special criterion taking into account a total volume of bed deformations per one hour was suggested to determine the conditions of profile stabilization. For both models the time scales of equilibrium profile formation were found to be the same. However, the deformation magnitudes differed significantly. Bed deformations were computed on the whole profile length over the 200-hours duration of wave impact. It was concluded that both models predict a trend of the bed slope toward a stable value. CROSS-P model shows the widening of accumulative terrace during the profile evolution. The mean slope of the equilibrium profile was found to depend on the initial bed slope.


2020 ◽  
pp. 25-28
Author(s):  
XU HUILIN ◽  
CHEN HUIHUI ◽  
ZHOU WEI ◽  
FU JIAJIA

Tidal fats resources is an important resource in coastal areas of China, which shows a trend of dynamic growth. Ratonal development and efectve utlizaton of tdal fats resources can alleviate the contradicton between more people and less land in China, and is of great signifcance to the development of coastal economy and the protecton of ecological environment in China. Taking Yancheng Tidal Flats of Coastal Areas as an example, analyzes the present situaton of development and utlizaton and the existng problems at the present stage. Relying on the existng industrial foundaton, this paper puts forward the development and utlizaton model of strengthening the constructon of port-neighboring industry, towns and ecological leisure tourism on the basis of modern agriculture


Sign in / Sign up

Export Citation Format

Share Document