scholarly journals A Compartmentalization & Ventilation System Retrofit Strategy for High-Rise Residential Buildings in Cold Climates

2017 ◽  
Vol 132 ◽  
pp. 867-872 ◽  
Author(s):  
Mathew Carlsson ◽  
Marianne Touchie ◽  
Russell Richman
Keyword(s):  
Residential Buildings ◽  
Ventilation System ◽  
Cold Climates ◽  
High Rise

scholarly journals Analysis of the systems of ventilation of residential houses of Ukraine and Estonia

2017 ◽  
Vol 12 (2) ◽  
pp. 23-30
Author(s):  
Olena Savchenko ◽  
Vasyl Zhelykh ◽  
Hendrik Voll
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Ventilation System ◽  
National Standards ◽  
Normative Documents ◽  
High Rise ◽  
Exhaust Ventilation ◽  
European Standards ◽  
Ventilation Systems

Abstract The most common ventilation system in residential buildings in Ukraine is natural ventilation. In recent years, due to increased tightness of structures, an increase in the content of synthetic finishing materials in them, the quality of microclimate parameters deteriorated. One of the measures to improve the parameters of indoor air in residential buildings is the use of mechanical inflow and exhaust ventilation system. In this article the regulatory documents concerning the design of ventilation systems in Ukraine and Estonia and the requirements for air exchange in residential buildings are considered. It is established that the existing normative documents in Ukraine are analogous to European norms, which allow design the system of ventilation of residential buildings according to European standards. However, the basis for the design of ventilation systems in Ukraine is the national standards, in which mechanical ventilation, unfortunately, is provided only for the design of high-rise buildings. To maintain acceptable microclimate parameters in residential buildings, it is advisable for designers to apply the requirements for designing ventilation systems in accordance with European standards.

scholarly journals Impact of a compartmentalization and ventilation system retrofit strategy on energy use in high-rise residential buildings

2021 ◽  
Author(s):  
Mathew Carlsson
Keyword(s):  
Energy Use ◽  
Residential Buildings ◽  
Ventilation System ◽  
Ghg Emissions ◽  
Residential Building ◽  
Air Distribution ◽  
High Rise ◽  
Building Enclosure ◽  
Air Tightness ◽  
The Impact

A compartmentalization and in-suite ventilation system (ISVS) retrofit strategy was investigated for an existing high-rise residential building in Vancouver. Computer simulation using EnergyPlus™ was used to examine the impact of the proposed retrofit on heating energy and GHG emissions for the building’s original 1983 condition, and its current condition which incorporates a 2012 enclosure retrofit. Results show annual heating energy decreased by 51% and overall GHG emissions decreased by 29% for the proposed retrofit applied to the building in its current condition. When applied to the building in its original condition, heating energy decreased by 49% and overall GHG emissions decreased by 21%. The main benefit of the proposed retrofit, however, is improved effectiveness of the mechanical ventilation system. Because building enclosure air-tightness improvements can negatively impact air distribution in buildings with pressurized corridor ventilation systems, the proposed retrofit should be applied in combination with, or before, an enclosure retrofit.

scholarly journals Impact of a compartmentalization and ventilation system retrofit strategy on energy use in high-rise residential buildings

2021 ◽  
Author(s):  
Mathew Carlsson
Keyword(s):  
Energy Use ◽  
Residential Buildings ◽  
Ventilation System ◽  
Ghg Emissions ◽  
Residential Building ◽  
Air Distribution ◽  
High Rise ◽  
Building Enclosure ◽  
Air Tightness ◽  
The Impact

A compartmentalization and in-suite ventilation system (ISVS) retrofit strategy was investigated for an existing high-rise residential building in Vancouver. Computer simulation using EnergyPlus™ was used to examine the impact of the proposed retrofit on heating energy and GHG emissions for the building’s original 1983 condition, and its current condition which incorporates a 2012 enclosure retrofit. Results show annual heating energy decreased by 51% and overall GHG emissions decreased by 29% for the proposed retrofit applied to the building in its current condition. When applied to the building in its original condition, heating energy decreased by 49% and overall GHG emissions decreased by 21%. The main benefit of the proposed retrofit, however, is improved effectiveness of the mechanical ventilation system. Because building enclosure air-tightness improvements can negatively impact air distribution in buildings with pressurized corridor ventilation systems, the proposed retrofit should be applied in combination with, or before, an enclosure retrofit.

Assessing the effect of night ventilation on PCM performance in high-rise residential buildings

2019 ◽  
Vol 43 (3) ◽  
pp. 229-249 ◽  
Author(s):  
Shahrzad Soudian ◽  
Umberto Berardi
Keyword(s):  
Thermal Energy ◽  
Phase Change Materials ◽  
Positive Impact ◽  
Residential Buildings ◽  
Solidification Rate ◽  
Operative Temperature ◽  
High Rise ◽  
Ventilation Strategies ◽  
Night Ventilation ◽  
The Impact

This article investigates the possibility to enhance the use of latent heat thermal energy storage (LHTES) as an energy retrofit measure by night ventilation strategies. For this scope, phase change materials (PCMs) are integrated into wall and ceiling surfaces of high-rise residential buildings with highly glazed facades that experience high indoor diurnal temperatures. In particular, this article investigates the effect of night ventilation on the performance of the PCMs, namely, the daily discharge of the thermal energy stored by PCMs. Following previous experimental tests that have shown the efficacy of LHTES in temperate climates, a system comprising two PCM layers with melting temperatures selected for a year-around LHTES was considered. To quantify the effectiveness of different night ventilation strategies to enhance the potential of this composite PCM system, simulations in EnergyPlusTM were performed. The ventilation flow rate, set point temperature, and operation period were the main tested parameters. The performance of the PCMs in relation to the variables was evaluated based on indoor operative temperature and cooling energy use variations in Toronto and New York in the summer. The solidification of the PCMs was analyzed based on the amount of night ventilation needed in each climate condition. The results quantify the positive impact of combining PCMs with night ventilation on cooling energy reductions and operative temperature regulation of the following days. In particular, the results indicate higher benefits obtainable with PCMs coupled with night ventilation in the context of Toronto, since this city experiences higher daily temperature fluctuations. The impact of night ventilation design variables on the solidification rate of the PCMs varied based on each parameter leading to different compromises based on the PCM and climate characteristics.

scholarly journals Sensitivity and Uncertainty Analyses of Human and Organizational Risks in Fire Safety Systems for High-Rise Residential Buildings with Probabilistic T-H-O-Risk Methodology

2021 ◽  
Vol 11 (6) ◽  
pp. 2590
Author(s):  
Samson Tan ◽  
Darryl Weinert ◽  
Paul Joseph ◽  
Khalid Moinuddin
Keyword(s):  
Fire Safety ◽  
Residential Buildings ◽  
Fire Risk ◽  
Regulatory Regime ◽  
High Rise ◽  
Fire Engineering ◽  
Verification Methods ◽  
Uncertainty Analyses ◽  
Risk Methodology ◽  
Probabilistic Risk

Given that existing fire risk models often ignore human and organizational errors (HOEs) ultimately leading to underestimation of risks by as much as 80%, this study employs a technical-human-organizational risk (T-H-O-Risk) methodology to address knowledge gaps in current state-of-the-art probabilistic risk analysis (PRA) for high-rise residential buildings with the following goals: (1) Develop an improved PRA methodology to address concerns that deterministic, fire engineering approaches significantly underestimate safety levels that lead to inaccurate fire safety levels. (2) Enhance existing fire safety verification methods by incorporating probabilistic risk approach and HOEs for (i) a more inclusive view of risk, and (ii) to overcome the deterministic nature of current verification methods. (3) Perform comprehensive sensitivity and uncertainty analyses to address uncertainties in numerical estimates used in fault tree/event trees, Bayesian network and system dynamics and their propagation in a probabilistic model. (4) Quantification of human and organizational risks for high-rise residential buildings which contributes towards a policy agenda in the direction of a sustainable, risk-based regulatory regime. This research contributes to the development of the next-generation building codes and risk assessment methodologies.

Sign in / Sign up

Export Citation Format

Share Document