Spray congealed solid lipid microparticles as a sustained release delivery system for Gonadorelin [6-D-Phe]: Production, optimization and in vitro release behavior

2020 ◽  
Vol 154 ◽  
pp. 18-32
Author(s):  
Kerstin Traub-Hoffmann ◽  
Katrin Gegenfurtner ◽  
Kay-Uwe Kraft ◽  
Wolfgang Friess
Keyword(s):  
Sustained Release ◽  
Delivery System ◽  
In Vitro Release ◽  
Production Optimization ◽  
Release Behavior ◽  
Solid Lipid ◽  
Solid Lipid Microparticles ◽  
Lipid Microparticles ◽  
Vitro Release

Development, in vitro and in vivo Evaluations of Solid-Lipid Microparticles based on Solidified Micellar Carrier System for Oral Delivery of Cefepime

2017 ◽  
Vol 10 (1) ◽  
pp. 3582-3593
Author(s):  
Chukwuebuka Umeyor ◽  
Uchechukwu Nnadozie ◽  
Anthony Attama
Keyword(s):  
Oral Delivery ◽  
In Vitro Release ◽  
Carrier System ◽  
Solid Lipid ◽  
Solid Lipid Microparticles ◽  
Release Study ◽  
Lipid Microparticles ◽  
Vitro Release

This study seeks to formulate and evaluate a solid lipid nanoparticle-based, solidified micellar carrier system for oral delivery of cefepime. Cefepime has enjoyed a lot of therapeutic usage in the treatment of susceptible bacterial infections; however, its use is limited due to its administration as an injection only with poor patient compliance. Since oral drug administration encourage high patient compliance with resultant effect in improved therapy, cefepime was formulated as solid lipid microparticles for oral delivery using the concept of solidified micellar carrier system. The carrier system was evaluated based on particle yield, particle size and morphology, encapsulation efficiency (EE %), and thermal analysis using differential scanning calorimeter (DSC). Preliminary microbiological studies were done using gram positive and negative bacteria. In vitro release study was performed using biorelevant media, while in vivo release study was performed in white albino rats. The yield of solid lipid microparticles (SLM) ranged from 84.2 – 98.0 %. The SLM were spherical with size ranges of 3.8 ± 1.2 to 42.0 ± 1.4 µm. The EE % calculated ranged from 83.6 – 94.8 %. Thermal analysis showed that SLM was less crystalline with high potential for drug entrapment. Microbial studies showed that cefepime retained its broad spectrum anti-bacterial activity. In vitro release showed sustained release of cefepime from SLM, and in vivo release study showed high concentration of cefepime released in the plasma of study rats. The study showed that smart engineering of solidified micellar carrier system could be used to improve oral delivery of cefepime.

scholarly journals Glutathione-Loaded Solid Lipid Microparticles as Innovative Delivery System for Oral Antioxidant Therapy

Pharmaceutics ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 364 ◽  
Author(s):  
Bertoni ◽  
Albertini ◽  
Facchini ◽  
Prata ◽  
Passerini
Keyword(s):  
Delivery System ◽  
Oral Drug Delivery ◽  
In Vitro Release ◽  
Radical Scavenging ◽  
Antioxidant Therapy ◽  
Oral Drug ◽  
Solid Lipid ◽  
Antioxidant Agents ◽  
Solid Lipid Microparticles ◽  
Lipid Microparticles

The present study aimed to develop a novel formulation containing glutathione (GSH) as an oral antioxidant therapy for the treatment of oxidative stress-related intestinal diseases. To this purpose, solid lipid microparticles (SLMs) with Dynasan 114 and a mixture of Dynasan 114 and Dynasan 118 were produced by spray congealing technology. The obtained SLMs had main particle sizes ranging from 250 to 355 µm, suitable for oral administration. GSH was efficiently loaded into the SLMs at 5% or 20% w/w and the encapsulation process did not modify its chemico-physical properties, as demonstrated by FT-IR, DSC and HSM analysis. Moreover, in vitro release studies using biorelevant media showed that Dynasan 114-based SLMs could efficiently release GSH in various intestinal fluids, while 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay demonstrated the good radical scavenging activity of this formulation. Dynasan 114-based SLMs exhibited an excellent biocompatibility on intestinal HT-29 cells at concentrations up to 2000 μg/mL. SLMs containing GSH alone or together with another antioxidant agent (catalase) were effective in reducing intracellular reactive oxygen species (ROS) levels. Overall, this study indicated that spray congealed SLMs are a promising oral drug delivery system for the encapsulation of one or more biological antioxidant agents for local intestinal treatment.

scholarly journals ORAL GENTAMICIN PREPARATION USING SOLIDIFIED LIPID PARTICULATE DELIVERY SYSTEM

2017 ◽  
Vol 9 (9) ◽  
pp. 22
Author(s):  
Musiliu Adedokun ◽  
Tenderwealth Jackson ◽  
Kelechi Uchegbu ◽  
Anthony Attama
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
Delivery System ◽  
In Vitro Release ◽  
Zero Order ◽  
Lipid Matrix ◽  
Mean Particle Size ◽  
Release Study ◽  
Vitro Release

Objective: Despite the broad pharmacological activity of gentamicin against a number of bacteria, it's very inadequate oral bioavailability due to poor intestinal membrane permeability has limited its formulation into oral dosage delivery system. This work was thus aimed at formulation and evaluation of gentamicin-loaded microemulsions based on preparation of lipid matrix for sustained release delivery.Methods: Oral gentamicin suspensions were prepared by emulsification method using Tween 80 as a mobile surfactant in the lipid matrix dispersion. The resultant oral suspensions were evaluated for mean particle size and morphology using a photomicrograph, encapsulation efficiency/entrapment, EE (%), dispersibility, pH and absolute drug content. Release study as a function of inhibition zone diameter (IZD) and in vitro release study was also carried out. The in vitro release study was performed in both simulated gastric fluid (pH 1.2) and simulated intestinal fluid (pH 7.2) respectively. The release data were analyzed mathematically according to zero order, first order and Higuchi equations.Results: The prepared suspensions were cream-white in colour, easily dispersed and well homogenized. Batch D, which had least amount of excipients incorporated into the lipid matrix showed clumped irregular-shaped and less free-flowing particles. The particle size was significantly influenced by lipid matrix combination ratio in the presence of a surfactant (p<0.05). The mean particle size diameters of the samples were 15.44 mm, 10.64 mm, 4.12 mm, and 2.70 mm for batches A, B, C and D respectively. The values of EE obtained varied between 47% and 59% with Batch B exhibiting the highest value. The Higuchi model gave the best release kinetics result followed by zero order kinetics.Conclusion: Oral gentamicin prepared exhibited antibacterial properties against Klebsiella spp., Escherchia coli, Bacillus subtilis, Staphylococcus aureus, and Pseudomonas aeruginosa. The results suggest that a lipid matrix system could be useful as a sustained release oral delivery system of a poorly absorbable drug such as gentamicin.

Nanocapsulation of Nitazoxanide in Solid Lipid Nanoparticles as a New Drug Delivery System and in vitro Release Study

2016 ◽  
Vol 16 (4) ◽  
pp. 120-127 ◽  
Author(s):  
Roghayeh Abbasalipo ◽  
Mohammad Fallah ◽  
Fruzan Sedighi ◽  
Amir Hossein Maghsood ◽  
Saman Javid
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Release Study ◽  
Vitro Release

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

Formulation and Evaluation of Sustained Release Dosage Forms of Norfloxacin

2018 ◽  
Vol 11 (6) ◽  
pp. 4331-4337
Author(s):  
C Suja ◽  
Sismy C
Keyword(s):  
Sustained Release ◽  
Guar Gum ◽  
In Vitro Release ◽  
Angle Of Repose ◽  
Prolonged Release ◽  
Weight Variation ◽  
Sustained Release Tablets ◽  
Release Study ◽  
Vitro Release

The goal of this study was to formulate and evaluate norfloxacin sustained release tablets. Norfloxacin sustained release tablets were prepared by wet granulation method using two polymers such as HPMC K 100 M (hydrophilic polymer) and guar gum (natural polymer) and with three polymer ratios (0.5, 1.0 and 1.5). The prepared granules were evaluated to preformulation studies such as angle of repose, bulk density, tapped density, bulkiness, compressibility index and Hauser’s ratio. All the parameters shows that the granules having good flow properties. Then the formulated tablets were taken to evaluation studies such as hardness, weight variation, friability, drug content and thickness. All the parameters were within the acceptable limits. IR spectral analysis showed that there was no interaction between the drug and polymers. The in vitro release study was performed in phosphate buffer pH 7.4 at 293 nm. The in vitro release study showed that if the polymer ratio is increased, then the release of the drug is prolonged. HPMC K 100M shows a prolonged release when compared to guar gum.

Enhanced Oral Absorption of All-trans Retinoic Acid upon Encapsulation in Solid Lipid Nanoparticles

2020 ◽  
Vol 8 (6) ◽  
pp. 495-510
Author(s):  
Manoj Kumar ◽  
Garima Sharma ◽  
Dinesh Singla ◽  
Sukhjeet Singh ◽  
Vandita Kakkar ◽  
...  
Keyword(s):  
Retinoic Acid ◽  
Side Effects ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Trans Retinoic Acid ◽  
All Trans Retinoic Acid ◽  
Vitro Release

Background:: All-trans retinoic acid (ATRA) is widely employed in the treatment of various proliferative and inflammatory diseases. However, its therapeutic efficacy is imperiled due to its poor solubility and stability. Latter was surmounted by its incorporation into a solid matrix of lipidic nanoparticles (SLNs). Methods:: ATRA loaded SLNs (ATRA-SLNs) were prepared using a novel microemulsification technique (USPTO 9907758) and an optimal composition and were characterized in terms of morphology, differential scanning calorimetry (DSC), and powder X-ray diffraction studies (PXRD). In vitro release, oral plasma pharmacokinetics (in rats) and stability studies were also done. Results:: Rod-shaped ATRA-SLNs could successfully incorporate 3.7 mg/mL of ATRA, increasing its solubility (from 4.7 μg/mL) by 787 times, having an average particle size of 131.30 ± 5.0 nm and polydispersibility of 0.283. PXRD, DSC, and FTIR studies confirmed the formation of SLNs. Assay/total drug content and entrapment efficiency of ATRA-SLNs was 92.50 ± 2.10% and 84.60 ± 3.20% (n=6), respectively, which was maintained even on storage for one year under refrigerated conditions as an aqueous dispersion. In vitro release in 0.01 M phosphate buffer (pH 7.4) with 3% tween 80 was extended 12 times from 2h for free ATRA to 24 h for ATRA-SLNs depicting Korsmeyer Peppas release. Oral administration in rats showed 35.03 times enhanced bioavailability for ATRA-SLNs. Conclusion:: Present work reports preparation and evaluation of bioenhanced ATRA-SLNs containing a high concentration of ATRA (>15 times than that reported by others). Latter is attributed to the novel preparation process and intelligent selection of components. Lay Summary: All-trans retinoic acid (ATRA) shows an array of pharmacological activities but its efficacy is limited due to poor solubility, stability and side effects. In present study its solubility and efficacy is improved by 787 and 35.5 times, respectively upon incorporation into solid lipid nanoparticles (ATRA-SLNs). Latter extended its release by 12 times and provided stability for at least a year under refrigeration. A controlled and sustained release will reduce dose related side effects. ATRA-SLNs reported presently can thus be used in treatment /prophylaxis of disorders like cancers, tuberculosis, age related macular degeneration and acne and as an immune-booster.

Sign in / Sign up

Export Citation Format

Share Document