Hot water production improves the energy return on investment of geothermal power plants

Energy ◽  
2013 ◽  
Vol 51 ◽  
pp. 273-280 ◽  
Author(s):  
R.S. Atlason ◽  
R. Unnthorsson
Keyword(s):  
Return On Investment ◽  
Power Plants ◽  
Hot Water ◽  
Water Production ◽  
Energy Return On Investment ◽  
Geothermal Power

scholarly journals A Project To Estimate The Power Capacity Of Geothermal Power Plants Based On The Enthalpy Of Geothermal Fluid And Plant Design

2021 ◽  
Author(s):  
Obumneme Oken
Keyword(s):  
Power Plant ◽  
Geothermal Energy ◽  
Electricity Generation ◽  
Power Plants ◽  
Hot Water ◽  
Power Capacity ◽  
Geothermal Fluid ◽  
Direct Heating ◽  
Single Flash ◽  
Geothermal Power

Nigeria has some surface phenomena that indicate the presence of viable geothermal energy. None of these locations have been explored extensively to determine the feasibility of sustainable geothermal energy development for electricity generation or direct heating. In this context, the present study aims to provide insight into the energy potential of such development based on the enthalpy estimation of geothermal reservoirs. This particular project was conducted to determine the amount of energy that can be gotten from a geothermal reservoir for electricity generation and direct heating based on the estimated enthalpy of the geothermal fluid. The process route chosen for this project is the single-flash geothermal power plant because of the temperature (180℃) and unique property of the geothermal fluid (a mixture of hot water and steam that exists as a liquid under high pressure). The Ikogosi warm spring in Ekiti State, Nigeria was chosen as the site location for this power plant. To support food security efforts in Africa, this project proposes the cascading of a hot water stream from the flash tank to serve direct heat purposes in agriculture for food preservation, before re-injection to the reservoir. The flowrate of the geothermal fluid to the flash separator was chosen as 3125 tonnes/hr. The power output from a single well using a single flash geothermal plant was evaluated to be 11.3 MW*. This result was obtained by applying basic thermodynamic principles, including material balance, energy balance, and enthalpy calculations. This particular project is a prelude to a robust model that will accurately determine the power capacity of geothermal power plants based on the enthalpy of fluid and different plant designs.

scholarly journals Regeneration of Electrical Energy from Waste Geothermal Fluid in Geothermal Power Plants

2019 ◽  
Vol 2 (3) ◽  
pp. 525-531
Author(s):  
Mahmut Hekim ◽  
Engin Cetin
Keyword(s):  
Power Plants ◽  
Thermoelectric Generator ◽  
Waste Heat ◽  
Electrical Energy ◽  
Heat Energy ◽  
Hot Water ◽  
Geothermal Resources ◽  
Geothermal Fluid ◽  
Geothermal Power ◽  
Electrical Energy Production

Geothermal power plants are the plants that provide the conversion of thermal energy in geothermal fluid to electrical energy as a result of the extraction of underground hot water resources to the earth by drilling. The total installed power of geothermal power plants in the field of geothermal resources in Turkey has reached 1,336 MW. The geothermal fluid, which is used for electric power generation in geothermal power plants, is re-injected into the underground wells after electrical energy production. For efficient generation of electrical energy in geothermal power plants, it is aimed to reuse the waste heat energy within the geothermal fluid before it is sent to the re-injection well. To achieve this aim, thermoelectric generator modules which convert waste heat energy to electrical energy can be used. In this study, a thermoelectric generator-based geothermal power plant simulator that converts geothermal fluid waste heat into electrical energy is installed and commissioned in the laboratory conditions.

scholarly journals Utilizing renewable resources – converting geothermal energy to electricity

2020 ◽  
Author(s):  
Miljan Vlahović ◽  
◽  
Milica Vlahović ◽  
Zoran Stević ◽  
◽  
...  
Keyword(s):  
Renewable Resources ◽  
Geothermal Energy ◽  
Power Plants ◽  
Hot Water ◽  
Geothermal Heat ◽  
Geothermal Resources ◽  
Binary Cycle ◽  
Flash Tank ◽  
Solid Soil ◽  
Geothermal Power

According to the official definition, approved by the European Geothermal Energy Council (EGEC), geothermal energy is energy accumulated as heat below the surface of solid soil. Geothermal energy is thermal energy generated and stored in the Earth. It is generally defined as the part of geothermal heat that can be directly utilized as heat or converted into other types of energy. Geothermal resources vary by location and depth towards the Earth's core. Their use is possible for different purposes depending on their temperature. This paper presents the harnessing geothermal resources for electricity generation. There are three main types of geothermal power plants: dry steam plants, flash steam plants, and binary cycle plants. Dry steam plants pipe hot steam from underground into turbines, which powers the generator to provide electricity. Flash steam plants pump hot water from underground into a cooler flash tank. The formed steam powers the electricity generator. Binary cycle plants pump hot water from underground through a heat exchanger that heats a second liquid to transform it into steam, which powers the generator. In all mentioned systems the used fluids are recycled. It can be concluded that geothermal power plants work similarly to other power plants, but providing the steam for starting the turbine from the earth's interior. The fact that used fluids return to the ground makes geothermal energy resources renewable.

scholarly journals A Project To Estimate The Power Capacity Of Geothermal Power Plants Based On The Enthalpy Of Geothermal Fluid And Plant Design

2021 ◽  
Author(s):  
Obumneme Oken
Keyword(s):  
Power Plant ◽  
Power Output ◽  
Geothermal Energy ◽  
Power Plants ◽  
Hot Water ◽  
Geothermal Resource ◽  
Power Capacity ◽  
Geothermal Fluid ◽  
Single Flash ◽  
Geothermal Power

Surface phenomena that signal the presence of viable geothermal energy can be found in various locations in Nigeria. None of these locations have been explored extensively to determine the feasibility of sustainable geothermal energy development for electricity generation or direct heating purposes. In this context, the present study aims to provide insight into the energy potential of such development based on the enthalpy estimation of geothermal reservoirs. This particular project was conducted to determine the power output from a geothermal resource given an estimated enthalpy of the geothermal fluid. The process route chosen for this project is the single-flash geothermal power plant because of the temperature (180℃) and unique property of the geothermal fluid (a mixture of hot water and steam that exists as a liquid under high pressure). The Ikogosi warm spring in Ekiti State, Nigeria was chosen as the site location for this power plant. To support food security efforts in Africa, this project proposes the cascading of a hot water stream from the flash tank to serve direct heat purposes in agriculture for food preservation, before re-injection to the reservoir. The flowrate of the geothermal fluid to the flash separator was chosen as 3125 tonnes/hr. The power output from a single well using a single flash geothermal plant was evaluated to be 11.3 MW*. This result was obtained by applying basic thermodynamic principles, including material balance, energy balance, and enthalpy calculations. This particular project is a prelude to a robust model that will accurately determine the power capacity of geothermal power plants based on the enthalpy of geothermal fluid, size of the geothermal resource, and different plant designs. I hope that the knowledge gained from the study will promote best practices in geothermal engineering and emphasize appropriate planning for, and implementation of, geothermal plants.

scholarly journals Central versus wellhead power plants in geothermal grid electricity generation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Moses Jeremiah Barasa Kabeyi ◽  
Oludolapo A. Olanrewaju
Keyword(s):  
Return On Investment ◽  
Electricity Generation ◽  
Power Plants ◽  
Steam Pressure ◽  
Financial Risks ◽  
Steam Consumption ◽  
Lower Efficiency ◽  
Early Return ◽  
Geothermal Wells ◽  
Geothermal Power

AbstractThe long gestation period, high upfront costs and the risks in the development of central geothermal power plants are the main reasons for the slow rate of geothermal electricity growth and its contribution to the global electricity mix. The overall objective of this study was to make a comparison between central geothermal power plants and wellhead power plants in the delivery of geothermal electricity projects. The study showed that wellhead power plants are generally less efficient compared to central power plants because of higher specific steam consumption, but are financially attractive because of the quicker return on investment, early electricity generation and the lower financial risks. The study showed that permanent wellhead power plants are a better option for geothermal wells with too low or too high steam pressure compared to others in the steam field. Temporary use of wellhead power plants as opposed to their permanent use is preferred when only limited time is available between the commissioning of a wellhead plant and the commissioning of a central power plant in the same steam field. Technical, operational and environmental challenges, including higher specific steam consumption and lower efficiency than central power plants as well as absence of geothermal fluid reinjection system make wellhead plants less economical and less sustainable in resource use. It can thus be concluded that wellhead power plants can reduce the long wait to generate geothermal electricity and make an early return on investment for investors. Both central and wellhead power plants have relatively higher capacity factor than many other power plants and so can be used to supply base load electricity for the grid or off-grid power supply. This study is a review of the central and wellhead power plants and additionally provides policy guidelines in the execution of geothermal electricity projects either as central or wellhead power plants for grid electricity generation.

210Pb in Bioenergy Production

1988 ◽  
Vol 24 (1-4) ◽  
pp. 411-414 ◽  
Author(s):  
R. Hedvall ◽  
B. Erlandsson
Keyword(s):  
Fly Ash ◽  
Radiation Dose ◽  
Power Plants ◽  
Fossil Fuels ◽  
District Heating ◽  
Enrichment Factors ◽  
Hot Water ◽  
Water Production ◽  
Waste Products ◽  
Radiological Impact

Abstract 210Pb is probably one of the major contributors to the radiation dose received by humans from the fumes emitted from the stacks of power plants using fossil fuels or biofuels. As a first step in the estimation of the total radiological impact on humans of radioactive emissions, we have determined 210Pb radioactivity enrichment factors between fuel and ash products and dose equivalents from 210Pb from stack releases to people living in the surroundings. Radioactivity concentrations in ash, peat, wood and other waste products from forests have been determined in 15 district heating plants, located throughout Sweden, which use bioenergy for hot water production. Dose equivalents to people living close to the plants will be, at most, around a few tens of nSv per year from 210Pb, assuming 1000 Bq.kg-1 in the stack effluent. It was also found that more than 50% of the lead is probably in a volatilised phase, separate from the fly ash, and is therefore not caught in the filters.

ALLEGHENY LUDLUM AL 29-4C

Alloy Digest ◽  
1993 ◽  
Vol 42 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Exchangers ◽  
Power Plants ◽  
High Strength ◽  
Corrosion Resistant ◽  
Resistant Alloy ◽  
Corrosion Resistant Alloy ◽  
Geothermal Power

Abstract AL 29-4C is a highly corrosion resistant alloy with a relatively high strength. This combination allows the use of lighter gage tubes, and has led to its use in the brine heat exchangers of geothermal power plants. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-554. Producer or source: Allegheny Ludlum Corporation.

Sign in / Sign up

Export Citation Format

Share Document