Genetic algorithm-based multi-objective optimization of cutting parameters in turning processes

2006 ◽  
Vol 19 (2) ◽  
pp. 127-133 ◽  
Author(s):  
Ramón Quiza Sardiñas ◽  
Marcelino Rivas Santana ◽  
Eleno Alfonso Brindis
Keyword(s):  
Genetic Algorithm ◽  
Cutting Parameters ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Optimization Of Cutting Parameters

scholarly journals Multi-Objective Optimization of Cutting Parameters in Turning AISI 304 Austenitic Stainless Steel

Metals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 217 ◽  
Author(s):  
Yu Su ◽  
Guoyong Zhao ◽  
Yugang Zhao ◽  
Jianbing Meng ◽  
Chunxiao Li
Keyword(s):  
Energy Consumption ◽  
Cutting Parameters ◽  
Optimization Method ◽  
Multi Objective Optimization ◽  
Aisi 304 ◽  
Multi Objective ◽  
Relational Analysis ◽  
304 Austenitic Stainless Steel ◽  
Grey Relational ◽  
Optimization Of Cutting Parameters

Energy conservation and emission reduction is an essential consideration in sustainable manufacturing. However, the traditional optimization of cutting parameters mostly focuses on machining cost, surface quality, and cutting force, ignoring the influence of cutting parameters on energy consumption in cutting process. This paper presents a multi-objective optimization method of cutting parameters based on grey relational analysis and response surface methodology (RSM), which is applied to turn AISI 304 austenitic stainless steel in order to improve cutting quality and production rate while reducing energy consumption. Firstly, Taguchi method was used to design the turning experiments. Secondly, the multi-objective optimization problem was converted into a simple objective optimization problem through grey relational analysis. Finally, the regression model based on RSM for grey relational grade was developed and the optimal combination of turning parameters (ap = 2.2 mm, f = 0.15 mm/rev, and v = 90 m/s) was determined. Compared with the initial turning parameters, surface roughness (Ra) decreases 66.90%, material removal rate (MRR) increases 8.82%, and specific energy consumption (SEC) simultaneously decreases 81.46%. As such, the proposed optimization method realizes the trade-offs between cutting quality, production rate and energy consumption, and may provide useful guides on turning parameters formulation.

Research on Optimization of Cutting Parameters Based on Genetic Algorithm

2011 ◽  
Vol 121-126 ◽  
pp. 4640-4645 ◽  
Author(s):  
Shu Ren Zhang ◽  
Xue Guang Li ◽  
Jun Wang ◽  
Hui Wei Wang
Keyword(s):  
Genetic Algorithm ◽  
Surface Roughness ◽  
Surface Quality ◽  
Bp Neural Network ◽  
Prediction Method ◽  
Cutting Parameters ◽  
Multi Objective Optimization ◽  
Experiment Data ◽  
Optimization Of Cutting Parameters ◽  
Working Efficiency

Three elements of Cutting dosages have a great effect on parts surface quality and working efficiency, the best organization of cutting three elements for parts surface quality must be found before machining, in order to surface roughness and machining cost of parts, multi-objective optimization model is established in this paper, model is solved by using genetic algorithm. Based on the BP neural network of three layers, forecasting model of surface roughness is established. According to existing experiment data and optimized cutting dosages, analysis and prediction of surface roughness is done. Machining experiment is done by using optimized data. The experiment result verifies feasibility of this optimistic method and prediction method of surface roughness.

scholarly journals Prediction of Surface Roughness of 304 Stainless Steel and Multi-Objective Optimization of Cutting Parameters Based on GA-GBRT

2019 ◽  
Vol 9 (18) ◽  
pp. 3684 ◽  
Author(s):  
Tao Zhou ◽  
Lin He ◽  
Jinxing Wu ◽  
Feilong Du ◽  
Zhongfei Zou
Keyword(s):  
Genetic Algorithm ◽  
Surface Roughness ◽  
Stainless Steel ◽  
Surface Quality ◽  
Regression Tree ◽  
Cutting Parameters ◽  
304 Stainless Steel ◽  
Gradient Boosting ◽  
Multi Objective Optimization ◽  
Multi Objective

Establishing and controlling the prediction model of a machined surface quality is known as the basis for sustainable manufacturing. An ensemble learning algorithm—the gradient boosting regression tree—is incorporated into the surface roughness modeling. In order to address the problem of a high time cost and tendency to fall into a local optimum solution when the grid search and conjugate gradient method is adopted to obtain the super-parameters of the ensemble learning algorithm, a genetic algorithm is employed to search for the optimal super-parameters in the training process, and a genetic-gradient boosting regression tree (GA-GBRT) algorithm is developed. A fitting goodness of fit is taken as the fitness function value of the genetic algorithm and combined with k-fold cross-validation, as such, the initial model parameters of the gradient boosting regression tree are optimized. Compared to the optimized artificial neural network (ANN) and support vector regression (SVR) and combined with the cutting experiment of 304 stainless steel with a micro-groove tool, a genetic algorithm multi-objective optimization model with the highest cutting efficiency and a supreme surface quality was constructed by applying the GA-GBRT model. The response relationship reveals the non-linear interaction that occurs between the cutting parameters and the surface roughness of 304 stainless steel that is machined by the micro-groove tool. As indicated by the results obtained from the multi-objective optimization, the cutting efficiency can be enhanced by increasing the cutting speed and depth within a small range of surface quality variations. The GA-GBRT model is validated to be reliable in making a prediction of the surface roughness and optimizing the cutting parameters with turning and milling data.

Multi-objective optimization of cutting parameters in the SAE 4340 steel turning process

2019 ◽  
Author(s):  
Augusto Campidelli ◽  
Marco Antonio Bonelli Junior ◽  
Bernardo Murta ◽  
Bruno Silva de Lima
Keyword(s):  
Cutting Parameters ◽  
Multi Objective Optimization ◽  
Turning Process ◽  
Multi Objective ◽  
4340 Steel ◽  
Steel Turning ◽  
Optimization Of Cutting Parameters
Sign in / Sign up

Export Citation Format

Share Document