A two-dimensional temperature field simulation of the La Primavera geothermal area, México

Geothermics ◽  
2021 ◽  
Vol 96 ◽  
pp. 102201
Author(s):  
O.M. Espinoza-Ojeda ◽  
J.L. Macías ◽  
E. Gómez-Arias ◽  
J.A. Muñiz-Jauregui ◽  
E. Rivera-Calderón ◽  
...  
Author(s):  
Guilherme Ramalho Costa ◽  
José Aguiar santos junior ◽  
José Ricardo Ferreira Oliveira ◽  
Jefferson Gomes do Nascimento ◽  
Gilmar Guimaraes

Author(s):  
G Atefi ◽  
M A Abdous ◽  
A Ganjehkaviri ◽  
N Moalemi

The objective of this article is to derive an analytical solution for a two-dimensional temperature field in a hollow cylinder, which is subjected to a periodic boundary condition at the outer surface, while the inner surface is insulated. The material is assumed to be homogeneous and isotropic with time-independent thermal properties. Because of the time-dependent term in the boundary condition, Duhamel's theorem is used to solve the problem for a periodic boundary condition. The periodic boundary condition is decomposed using the Fourier series. This condition is simulated with harmonic oscillation; however, there are some differences with the real situation. To solve this problem, first of all the boundary condition is assumed to be steady. By applying the method of separation of variables, the temperature distribution in a hollow cylinder can be obtained. Then, the boundary condition is assumed to be transient. In both these cases, the solutions are separately calculated. By using Duhamel's theorem, the temperature distribution field in a hollow cylinder is obtained. The final result is plotted with respect to the Biot and Fourier numbers. There is good agreement between the results of the proposed method and those reported by others for this geometry under a simple harmonic boundary condition.


2011 ◽  
Vol 36 (6) ◽  
pp. 4228-4235 ◽  
Author(s):  
Bariza Zitouni ◽  
G.M. Andreadis ◽  
Ben Moussa Hocine ◽  
Abdenebi Hafsia ◽  
Haddad Djamel ◽  
...  

1973 ◽  
Vol 95 (2) ◽  
pp. 250-256 ◽  
Author(s):  
T. E. Cooper ◽  
J. P. Groff

This paper discusses the use of heat for producing clinical lesions in tissue and presents the design and analysis of a resistively heated surgical probe. The probe surface temperature is accurately maintained and controlled by using a Wheatstone bridge. The probe was embedded in a clear agar–water test medium, and the temperature field generated by the probe was measured with liquid crystals, a material that provides a visual display of certain isotherms. Experimental results compare within approximately 10 percent of a two-dimensional numerical solution. A one-dimensional theoretical model is also developed which examines the influence of blood flow on the temperature field.


2010 ◽  
Vol 455 ◽  
pp. 345-349
Author(s):  
B.C. Xie ◽  
Zhen Long Wang ◽  
Yu Kui Wang ◽  
Jing Zhi Cui

In this paper, a thermo-physical model of the electric discharge machining process using finite element method is presented. In this model, parameters such as convection, the latent heat and the thermal properties based on temperature dependent etc. are studied to predict the temperature distribution in the workpiece. The temperature field simulation and experiment were carried out by adopting parameters through optimum pulse curve, and amending the effects of recast layer, the simulation results amended shows a better agreement with experimental results, indicating a theoretical foundation for mechanism of material removal in EDM machining.


1983 ◽  
Vol 26 (215) ◽  
pp. 708-715 ◽  
Author(s):  
Mamoru FURUKAWA ◽  
Minoru HAMADA ◽  
Hiroshi KITAGAWA ◽  
Toshimichi FUKUOKA

Sign in / Sign up

Export Citation Format

Share Document