A unified methodology for calculation of compliance and stiffness contribution tensors of inhomogeneities of arbitrary 2D and 3D shapes embedded in isotropic matrix – open access software.

2020 ◽  
Vol 157 ◽  
pp. 103390
Author(s):  
A. Markov ◽  
A. Trofimov ◽  
I. Sevostianov
2019 ◽  
Author(s):  
Joel Robitaille ◽  
Stephen Emrich

In the past two decades, significant advances have been made to understand the psychophysical properties of visual short-term memory (VSTM). Most studies, however, make inferences based on memory for simple surface features of 2D shapes. Here, we examined the role of object complexity and dimensionality on the psychophysical properties of VSTM by comparing orientation memory for 2D lines and complex 3D objects in a delayed-response continuous report task, where memory load (Experiment 1) or axis of rotation (Experiment 2) was manipulated. In both experiments, our results demonstrate an overall cost of complexity that affected participants raw errors as well as their guess rate and response precision derived from mixture modelling. We also demonstrate that participants’ memory performance is correlated between stimulus types and that memory performance for both 2D and 3D shapes is better fit to the variable precision model of VSTM than to tested competing models. Interestingly, the ability to report complex objects is not consistent across axes of rotation. These results indicate that, despite the fact that VSTM shares similar properties for 2D and 3D shapes, VSTM is far from being a unitary process and is affected by stimulus properties such as complexity and dimensionality.


Proceedings ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 16
Author(s):  
Jorge Angás ◽  
Mercedes Farjas ◽  
Manuel Bea

In this paper we briefly analyse the integration into web access of data recorded from the archaeological area of Khatm al Melaha (Emirate of Sharjah, United Arab Emirates), combining different geomatic techniques at different scales from a broad yet technical perspective. In order to improve scientific analysis, the documenting process should always consider every aspect of recording as well as preventive control, conservation and interpretation. Along these lines, some open–access, web–based 2D and 3D JavaScript libraries have been created to unify, simplify and analyse their different uses through a web platform called threeDcloud.


1999 ◽  
Vol 61 (1) ◽  
pp. 44-62 ◽  
Author(s):  
Gunilla Borgefors ◽  
Giuliana Ramella ◽  
Gabriella Sanniti di Baja ◽  
Stina Svensson

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Ismet Handz̆ić ◽  
Kyle B. Reed

A circular shape placed on an incline will roll; similarly, an irregularly shaped object, such as the Archimedean spiral, will roll on a flat surface when a force is applied to its axle. This rolling is dependent on the specific shape and the applied force (magnitude and location). In this paper, we derive formulas that define the behavior of irregular 2D and 3D shapes on a flat plane when a weight is applied to the shape's axle. These kinetic shape (KS) formulas also define and predict shapes that exert given ground reaction forces when a known weight is applied at the axle rotation point. Three 2D KS design examples are physically verified statically with good correlation to predicted values. Motion simulations of unrestrained 2D KS yielded expected results in shape dynamics and self-stabilization. We also put forth practical application ideas and research for 2D and 3D KS such as in robotics and gait rehabilitation.


NeuroImage ◽  
1998 ◽  
Vol 7 (4) ◽  
pp. S335 ◽  
Author(s):  
Gyula Kovács ◽  
Balázs Gulyás ◽  
Per Roland

Author(s):  
A. V. Granovski ◽  
M. K. Kostege

The paper presents the detailed investigation of the flow structure and losses in a hub and tip sections of the last blade of the multistage turbine. The design of the last blade has been carried out on the basis of the in-house blade generator (BLAGEN) which allows to create optimal plane sections (usually 3–5) along blade height and to stack whole blades of various 3D shapes. The viscous flow structure and the loss variation have been investigated at the endwall sections of the last blade by means of 2D and 3D Navier–Stokes codes. These investigations have been carried out for a wide range of modes and incidences. As a result the influence of the following parameters (maximum thickness-to-chord ratio, leading metal angle, Re number, exit Ma number and etc.) on the flow structure and losses has been investigated. On the basis of these investigations some recommendations for the last blades design have been developed. Numerical investigations have been validated by the comparison between numerical and test data for the outlet flow.


Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5879
Author(s):  
Shih-Feng Huang ◽  
Yung-Hsuan Wen ◽  
Chi-Hsiang Chu ◽  
Chien-Chin Hsu

This study proposes a shape approximation approach to portray the regions of interest (ROI) from medical imaging data. An effective algorithm to achieve an optimal approximation is proposed based on the framework of Particle Swarm Optimization. The convergence of the proposed algorithm is derived under mild assumptions on the selected family of shape equations. The issue of detecting Parkinson’s disease (PD) based on the Tc-99m TRODAT-1 brain SPECT/CT images of 634 subjects, with 305 female and an average age of 68.3 years old from Kaohsiung Chang Gung Memorial Hospital, Taiwan, is employed to demonstrate the proposed procedure by fitting optimal ellipse and cashew-shaped equations in the 2D and 3D spaces, respectively. According to the visual interpretation of 3 experienced board-certified nuclear medicine physicians, 256 subjects are determined to be abnormal, 77 subjects are potentially abnormal, 174 are normal, and 127 are nearly normal. The coefficients of the ellipse and cashew-shaped equations, together with some well-known features of PD existing in the literature, are employed to learn PD classifiers under various machine learning approaches. A repeated hold-out with 100 rounds of 5-fold cross-validation and stratified sampling scheme is adopted to investigate the classification performances of different machine learning methods and different sets of features. The empirical results reveal that our method obtains 0.88 ± 0.04 classification accuracy, 0.87 ± 0.06 sensitivity, and 0.88 ± 0.08 specificity for test data when including the coefficients of the ellipse and cashew-shaped equations. Our findings indicate that more constructive and useful features can be extracted from proper mathematical representations of the 2D and 3D shapes for a specific ROI in medical imaging data, which shows their potential for improving the accuracy of automated PD identification.


Sign in / Sign up

Export Citation Format

Share Document