scholarly journals An experimental investigation on the thermal augmentation of internal endwall in a two-pass duct using an array of delta-winglet vortex generator pair

Author(s):  
Lei Luo ◽  
Zhiqi Zhao ◽  
Dandan Qiu ◽  
Songtao Wang ◽  
Zhongqi Wang ◽  
...  
Author(s):  
Shunsuke Koike ◽  
Kazuyuki Nakakita ◽  
Tsutomu Nakajima ◽  
Seigo Koga ◽  
Mamoru Sato ◽  
...  

Author(s):  
Md. Islam ◽  
Z. Chong ◽  
S. Bojanampati

Various technologies have been developed to enhance flow mixing and heat transfer in order to develop an efficient compact heat exchanging devices. Vortex generators/turbulent promoters generate the vortices which reduce the boundary layer thickness and introduce the better mixing of the fluid to enhance the heat transfer. In this research experimental investigations have been carried out to study the effect of delta winglet vortex generator pairs on heat transfer and flow behavior. To generate longitudinal vortex flow, two pairs of the delta winglet vortex generators (DWVG) with the length of 10mm and winglet-pitch to tube-diameter ratio (PR = 4.8) are mounted on the inner wall of a circular tube. The DWVG pairs with two different winglet-height to tube-diameter ratios (Blockage ratio, BR = 0.1 and 0.2), three attack angles (α = 10°, 20°, 30°) and three spacings between leading edges (S = 10, 15 and 20mm) are studied. The experiments were conducted with DWVGs pairs for the air flow range of Reynolds numbers 5000–25000. The influence of the DWVGs on heat transfer and pressure drop was investigated in terms of the Nusselt number and friction factor. The experimental results indicate that DWVG pair in a tube results in a considerable enhancement in Nusselt number (Nu) with some pressure penalty. It is found that DWVG increases Nu up to 85% over the smooth tube. It is also observed that Nusselt number increases with Re, blockage ratio and attack angle. Friction factor decreases with Re but increases with blockage ratio, spacing and attack angle. And 30° DWVG pair with S = 20mm, BR = 0.2 gets the highest friction factor. The Highest thermal performance enhancement (TPE) was noticed for α = 10°, S = 20mm, BR = 0.2 for turbulent flows. To obtain qualitative information on the flow behavior and vortex structures, flow was visualized by laser sheet using smoke as a tracer supplied at the entrance of the test section. The generation and development of longitudinal vortices influenced by DWVG pairs were clearly observed.


2016 ◽  
Vol 183 ◽  
pp. 1317-1332 ◽  
Author(s):  
Lei Luo ◽  
Fengbo Wen ◽  
Lei Wang ◽  
Bengt Sundén ◽  
Songtao Wang

2017 ◽  
Vol 111 ◽  
pp. 586-598 ◽  
Author(s):  
Lei Luo ◽  
Fengbo Wen ◽  
Lei Wang ◽  
Bengt Sundén ◽  
Songtao Wang

Author(s):  
Azize Akcayoglu ◽  
Celal Nazli

In this study, the influence of spanwise positions of vortex generators on the fin performance is determined numerically by considering global and local flow and heat transfer fields. The vortex generators are located on the inclined surfaces of equilateral triangular fins and the spanwise distances between them are altered as much as possible depending on the extents of the triangular duct. “RNG k-ɛ” turbulence model with “Enhanced wall treatment” option is determined as the best turbulence model to predict the flow fields inside the triangular fins with built-in vortex generators, for Reynolds number of 5000. It is found that the best performance is achieved when the spanwise distance between the common flow up and common flow down type vortex generator pairs and the triangular duct base are equal to 0.23 and 1.11 times the vortex generator length, respectively. The optimum spanwise distance between the vortex generators is determined as 0.88 times the vortex generator length. The determined values reinforced the secondary flow interactions including mixing of hot and cold fluids, generation of turbulence, swirling motion of vortices, and interaction of vortices with the main flow. The obtained results are useful in designing triangular heat exchangers with built-in delta-winglet type vortex generators.


Sign in / Sign up

Export Citation Format

Share Document