blockage ratio
Recently Published Documents


TOTAL DOCUMENTS

208
(FIVE YEARS 70)

H-INDEX

21
(FIVE YEARS 5)

Author(s):  
Hao Wu ◽  
Antonio Carlos Fernandes ◽  
Renjing Cao

Abstract The uniform flow over a nominally two-dimensional normal thin flat plate with blockage ratio 0.214 was numerically investigated in three dimensions by three methods: unsteady Reynolds-averaged Navier–Stokes (URANS) based on the realizable k-epsilon (RKE) turbulence model, URANS based on the k–omega shear stress transport (SST) turbulence model and detached eddy simulation (DES). The Reynolds number based on the inlet flow velocity and the chord width of the plate was 117000. A comprehensive comparison against earlier experimental results showed that URANS-SST method only could give a correct Strouhal number but overestimated the mean base pressure distribution and mean drag coefficient, while URANS-RKE and DES methods succeeded in giving accurate prediction of all. Moreover, by comparing the instantaneous vorticity contours and 3D turbulent flow structures, it is found that DES is better suited for the present case because it can capture irregular small-scale structures and reproduce the three-dimensionality and low-frequency unsteadiness of the vortex shedding. Finally, through the volume-of-fluid (VOF) based simulation of the free surface, it is demonstrated that the free surface has no significant effect on mean drag coefficient and Strouhal number.


Water ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 3388
Author(s):  
Xianrui Shi ◽  
Jia Dong ◽  
Genhua Yan ◽  
Chunyue Zhu

With the depletion of fossil energy sources, clean energy has become a growing concern for scholars. Vortex-Induced Vibration Aquatic Clean Energy (VIVACE), a device that uses water flow energy to generate electricity, has attracted much attention for its broad applicability and other advantages. Particle Image Velocimetry (PIV) experiments were conducted to improve the efficiency of the VIVACE device in low-velocity areas. The present study investigated the effects of the Blockage ratio (Br), Reynolds number (Re = ρU0D/μ), and Aspect ratio (Ar = B/D, width-to-height) of rectangular cylinders on flow characteristics. The influence of the Ar, Br, and Re on the flow field structure was systematically analyzed in terms of the time-averaged flow field, Reynolds shear stress, space–time correlation, vorticity field, and water pressure characteristics. The vorticity field was deconstructed by Proper Orthogonal Decomposition (POD). The results show that the first two orders of POD modal energy accounted for 75% of the total energy, indicating that the first two modes can be used to identify the large-scale vortex structure. The main water pressure frequency and vortex shedding frequency (f) had a high degree of consistency. Thus, vortex shedding was the main cause of wall water pressure fluctuations. Given the blockage effect, the shear layer’s development spanwise was restricted. Moreover, the blockage effect increased the local flow velocity and accelerated the vortex shedding. The dimensionless time-averaged flow velocity U/U0 increased to 1.5, and the frequency of vortex shedding increased by approximately 25% when the Br increased from 0.067 to 0.25. The frequency increased by 25% when the Ar decreased from 0.5 to 0.2. The experimental results also provide a new idea for optimizing the VIVACE device.


2021 ◽  
Vol 117 ◽  
pp. 104165
Author(s):  
Jie Wang ◽  
Yongjie Fan ◽  
Yinqiu Wei ◽  
Xuepeng Jiang ◽  
Kaihua Lu

2021 ◽  
Vol 929 ◽  
Author(s):  
O. Ruz ◽  
E. Castillo ◽  
M. Cruchaga

In this work, the fluid dynamics and heat transfer of time-dependent flows with shear-thinning behaviour over two confined square cylinders in tandem arrangement are studied numerically. The case studies include two- and three-dimensional flows under a wide range of power-law indices, $0.25\leq n \leq 1.0$ , and blockage ratios, $\beta =0.50$ , 0.66 and 0.80, for a fixed Reynolds number of $Re=100$ and Prandtl number of $Pr=10$ . The fluid dynamic analysis includes detailed qualitative and quantitative comparisons between the different fluids and blockage ratios, where streamlines, viscosity fields, and lift and drag coefficients are presented. Moreover, a detailed study of the route from laminar time-dependent to chaotic flows is included. It was determined that the flow exhibits a transition from laminar to chaotic by decreasing the power-law index ( $n$ ) and increasing the blockage ratio ( $\beta$ ). With respect to the thermal analysis, isotherms and Nusselt numbers are compared between the different case studies. This analysis demonstrates that the average Nusselt numbers increased in chaotic flows. The three-dimensional cases confirmed the results proposed for the two-dimensional case.


Otopro ◽  
2021 ◽  
pp. 15-20
Author(s):  
Diastian Vinaya Wijanarko

The numerical study of pressure drop on a tandem cylinder with the addition of a splitter plate and a vortex generator with the effect of a blockage ratio has been completed. The cross-sectional height and diameter of the cylinder in this study used H= 125 mm and D= 37.5 mm, respectively. The blockage ratio is 30%. The Reynolds number (Re) is 52100 ≤ Re ≤ 156000. The distance between cylinders is 5 to 8, where “s” is the distance from cylinder one to cylinder two. The dimensions of the splitter plate are L=D, L=1,5D, and L=2D where "L" is the length of the splitter plate, while the thickness in this study is 1, 75mm. The dimensions of the vortex generator in this study are used those of Hu, et al. [6]. The angle of the vortex generator is = 350 while the length of the vortex generator is H = 3 mm. All variations of this numerical study were carried out using the URANS (Unsteady Reynold Average Navier Stoke) method with a Reynolds number (Re) 52,100 Re 156,000. The smallest pressure drop value is obtained at the Reynolds number 52.100 for all variations, while the highest Reynolds number is obtained at Re 156.000. the addition of a splitter plate and a vortex generator, gives a higher pressure drop when compared to a circular cylinder.


2021 ◽  
pp. 407-415
Author(s):  
Arees Qamareen ◽  
Shah Shahood Alam ◽  
Mubashshir Ahmad Ansari

Micromachines ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 1242
Author(s):  
Hiroshi Yamashita ◽  
Takeshi Akinaga ◽  
Masako Sugihara-Seki

The continuous separation and filtration of particles immersed in fluid flows are important interests in various applications. Although the inertial focusing of particles suspended in a duct flow is promising in microfluidics, predicting the focusing positions depending on the parameters, such as the shape of the duct cross-section and the Reynolds number (Re) has not been achieved owing to the diversity of the inertial-focusing phenomena. In this study, we aimed to elucidate the variation of the inertial focusing depending on Re in rectangular duct flows. We performed a numerical simulation of the lift force exerted on a spherical particle flowing in a rectangular duct and determined the lift-force map within the duct cross-section over a wide range of Re. We estimated the particle trajectories based on the lift map and Stokes drag, and identified the particle-focusing points appeared in the cross-section. For an aspect ratio of the duct cross-section of 2, we found that the blockage ratio changes transition structure of particle focusing. For blockage ratios smaller than 0.3, particles focus near the centres of the long sides of the cross-section at low Re and near the centres of both the long and short sides at relatively higher Re. This transition is expressed as a subcritical pitchfork bifurcation. For blockage ratio larger than 0.3, another focusing pattern appears between these two focusing regimes, where particles are focused on the centres of the long sides and at intermediate positions near the corners. Thus, there are three regimes; the transition between adjacent regimes at lower Re is found to be expressed as a saddle-node bifurcation and the other transition as a supercritical pitchfork bifurcation.


2021 ◽  
Vol 115 ◽  
pp. 104055
Author(s):  
Wenhui Li ◽  
Tanghong Liu ◽  
Pedro Martinez-Vazquez ◽  
Zhengwei Chen ◽  
Xiaoshuai Huo ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document