Combustion behavior and stability map of hydrogen-enriched oxy-methane premixed flames in a model gas turbine combustor

2018 ◽  
Vol 43 (34) ◽  
pp. 16652-16666 ◽  
Author(s):  
Binash A. Imteyaz ◽  
Medhat A. Nemitallah ◽  
Ahmed A. Abdelhafez ◽  
Mohamed A. Habib
Keyword(s):  
Gas Turbine ◽  
Premixed Flames ◽  
Gas Turbine Combustor ◽  
Combustion Behavior ◽  
Model Gas Turbine Combustor

scholarly journals Effects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Anandkumar Makwana ◽  
Suresh Iyer ◽  
Milton Linevsky ◽  
Robert Santoro ◽  
Thomas Litzinger ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Volume Fraction ◽  
Soot Formation ◽  
Premixed Flames ◽  
Soot Volume Fraction ◽  
Spatial Development ◽  
Gas Turbine Combustor ◽  
Jet Flames ◽  
Jet Flame ◽  
Model Gas Turbine Combustor

The objective of this study is to understand the effects of fuel volatility on soot emissions. This effect is investigated in two experimental configurations: a jet flame and a model gas turbine combustor. The jet flame provides information about the effects of fuel on the spatial development of aromatics and soot in an axisymmetric, co-flow, laminar flame. The data from the model gas turbine combustor illustrate the effect of fuel volatility on net soot production under conditions similar to an actual engine at cruise. Two fuels with different boiling points are investigated: n-heptane/n-dodecane mixture and n-hexadecane/n-dodecane mixture. The jet flames are nonpremixed and rich premixed flames in order to have fuel conditions similar to those in the primary zone of an aircraft engine combustor. The results from the jet flames indicate that the peak soot volume fraction produced in the n-hexadecane fuel is slightly higher as compared to the n-heptane fuel for both nonpremixed and premixed flames. Comparison of aromatics and soot volume fraction in nonpremixed and premixed flames shows significant differences in the spatial development of aromatics and soot along the downstream direction. The results from the model combustor indicate that, within experiment uncertainty, the net soot production is similar in both n-heptane and n-hexadecane fuel mixtures. Finally, we draw conclusions about important processes for soot formation in gas turbine combustor and what can be learned from laboratory-scale flames.

Effects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor

2017 ◽  
Author(s):  
Anandkumar Makwana ◽  
Suresh Iyer ◽  
Milton Linevsky ◽  
Robert Santoro ◽  
Thomas Litzinger ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Volume Fraction ◽  
Premixed Flames ◽  
Soot Volume Fraction ◽  
Spatial Development ◽  
Inlet Temperature ◽  
Gas Turbine Combustor ◽  
Jet Flames ◽  
Jet Flame ◽  
Model Gas Turbine Combustor

The objective of this study is to understand the effects of fuel volatility on soot emissions. The effect of fuel volatility on soot is investigated in two experimental configurations: a jet flame and a model gas turbine combustor. The jet flame experiment provides information about the effects of fuel on the spatial development of aromatics and soot in an axisymmetric, co-flow, laminar flame at atmospheric pressure. The data from the model gas turbine combustor illustrate the effect of fuel volatility on net soot production under conditions similar to an actual engine at cruise, operated at 5 atm, an inlet temperature of 560 K, and an inlet global equivalence ratio of 0.9 to 1.8. Two fuels with different boiling points are investigated: n-heptane/n-dodecane mixture and n-hexadecane/n-dodecane mixture. The n-hexadecane has a boiling point of 287° C as compared to 216° C for n-dodecane and 98° C for n-heptane. The jet flames investigated are non-premixed and premixed flames (jet equivalence ratios of 24 and 6) in order to have fuel rich conditions similar to those in the primary zone of an aircraft engine combustor. The results from the jet flames indicate that the peak soot volume fraction produced in the n-hexadecane fuel is slightly higher as compared to the n-heptane fuel for both non-premixed and premixed flames. The comparison of aromatics and soot volume fraction in non-premixed and premixed flames shows significant differences in the spatial development of aromatics and soot along the downstream direction. The results from the model combustor indicate that, within experiment uncertainty, the net soot production is similar in both n-heptane and n-hexadecane fuel mixtures. In comparing the results from these two burner configurations, we draw conclusions about important processes for soot formation in gas turbine combustors and what can be learned from laboratory-scale flames.

scholarly journals Active Control Application to a Model Gas Turbine Combustor

1990 ◽  
Author(s):  
J. Brouwer ◽  
B. A. Ault ◽  
J. E. Bobrow ◽  
G. S. Samuelsen
Keyword(s):  
Feedback Control ◽  
Gas Turbine ◽  
Active Control ◽  
Input Parameter ◽  
Radiative Flux ◽  
Gas Turbine Combustor ◽  
Control Computer ◽  
Loop Feedback ◽  
Model Gas Turbine Combustor ◽  
Control Application

Closed-loop feedback control, developed in a axisymmetric can combustor, is demonstrated in a model can combustor with discrete wall jets. The study represents the initial steps toward the application of feedback control technology to practical gas turbine combustion systems. For the present application, the radiative flux from soot particulate is used as an indication of combustor performance, and nozzle atomizing air is selected as the input parameter. A measurement of radiative flux at the exit plane of the combustor is conveyed to a control computer which invokes an optimization algorithm to determine changes in the dome region necessary to minimize the radiative flux from soot. The results demonstrate the utility and potential of active control for maintaining optimal performance in real-time.

scholarly journals The Effect of Discrete Pilot Hydrogen Dopant Injection on the Lean Blowout Performance of a Model Gas Turbine Combustor

1999 ◽  
Author(s):  
Oanh Nguyen ◽  
Scott Samuelsen
Keyword(s):  
Gas Turbine ◽  
Atmospheric Pressure ◽  
Gas Turbines ◽  
Nox Emissions ◽  
Gas Turbine Combustor ◽  
Lean Blowout ◽  
Lean Combustion ◽  
Attractive Option ◽  
Overall Performance ◽  
Model Gas Turbine Combustor

In view of increasingly stringent NOx emissions regulations on stationary gas turbines, lean combustion offers an attractive option to reduce reaction temperatures and thereby decrease NOx production. Under lean operation, however, the reaction is vulnerable to blowout. It is herein postulated that pilot hydrogen dopant injection, discretely located, can enhance the lean blowout performance without sacrificing overall performance. The present study addresses this hypothesis in a research combustor assembly, operated at atmospheric pressure, and fired on natural gas using rapid mixing injection, typical of commercial units. Five hydrogen injector scenarios are investigated. The results show that (1) pilot hydrogen dopant injection, discretely located, leads to improved lean blowout performance and (2) the location of discrete injection has a significant impact on the effectiveness of the doping strategy.

Sign in / Sign up

Export Citation Format

Share Document