Effect of the orientation on the ferroelectricity, dielectricity and magnetoelectric coupling in the bilayered Pb(Zr0.52Ti0.48)O3 film-on-CoFe2O4 bulk ceramic composites

The presence of interfacial films at the whisker-matrix interface can significantly influence the fracture toughness of ceramic composites. The film may alter the interface debonding process though changes in either the interfacial fracture energy or the residual stress at the interface. In addition, the films may affect the whisker pullout process through the frictional sliding coefficients or the extent of mechanical interlocking of the interface due to the whisker surface topography.Composites containing ACMC silicon carbide whiskers (SiCw) which had been coated with 5-10 nm of carbon and Tokai whiskers coated with 2 nm of carbon have been examined. High resolution electron microscopy (HREM) images of the interface were obtained with a JEOL 4000EX electron microscope. The whisker geometry used for HREM imaging is described in Reference 2. High spatial resolution (< 2-nm-diameter probe) parallel-collection electron energy loss spectroscopy (PEELS) measurements were obtained with a Philips EM400T/FEG microscope equipped with a Gatan Model 666 spectrometer.

Download Full-text

HREM interface studies in SiC-whisker-reinforced Al2O3 and Si3N4 ceramics

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100105734 ◽

1988 ◽

Vol 46 ◽

pp. 734-735

Author(s):

W. Braue ◽

R.W. Carpenter ◽

D.J. Smith

Keyword(s):

Analytical Data ◽

Base Material ◽

High Strength ◽

Ceramic Composites ◽

Good Thermal Stability ◽

All Ceramic ◽

Sic Whiskers ◽

Base Composite ◽

C 30 ◽

Si3n4 Ceramics

Whisker and fiber reinforcement has been established as an effective toughening concept for monolithic structural ceramics to overcome limited fracture toughness and brittleness. SiC whiskers in particular combine both high strength and elastic moduli with good thermal stability and are compatible with most oxide and nonoxide matrices. As the major toughening mechanisms - crack branching, deflection and bridging - in SiC whiskenreinforced Al2O3 and Si3N41 are critically dependent on interface properties, a detailed TEM investigation was conducted on whisker/matrix interfaces in these all-ceramic- composites.In this study we present HREM images obtained at 400 kV from β-SiC/α-Al2O3 and β-SiC/β-Si3N4 interfaces, as well as preliminary analytical data. The Al2O3- base composite was hotpressed at 1830 °C/60 MPa in vacuum and the Si3N4-base material at 1725 °C/30 MPa in argon atmosphere, respectively, adding a total of 6 vt.% (Y2O3 + Al2O3) to the latter to promote densification.

Download Full-text

Biomimetic materials: An introduction

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100129735 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1020-1021 ◽

Cited By ~ 1

Author(s):

M. Sarikaya ◽

J. T. Staley ◽

I. A. Aksay

Keyword(s):

Self Assembly ◽

Structural Control ◽

Hierarchical Structures ◽

Ceramic Composites ◽

Advanced Materials ◽

Length Scale ◽

Spider Webs ◽

Biomimetic Materials ◽

Synthetic Materials ◽

All Ceramic

Biomimetics is an area of research in which the analysis of structures and functions of natural materials provide a source of inspiration for design and processing concepts for novel synthetic materials. Through biomimetics, it may be possible to establish structural control on a continuous length scale, resulting in superior structures able to withstand the requirements placed upon advanced materials. It is well recognized that biological systems efficiently produce complex and hierarchical structures on the molecular, micrometer, and macro scales with unique properties, and with greater structural control than is possible with synthetic materials. The dynamism of these systems allows the collection and transport of constituents; the nucleation, configuration, and growth of new structures by self-assembly; and the repair and replacement of old and damaged components. These materials include all-organic components such as spider webs and insect cuticles (Fig. 1); inorganic-organic composites, such as seashells (Fig. 2) and bones; all-ceramic composites, such as sea urchin teeth, spines, and other skeletal units (Fig. 3); and inorganic ultrafine magnetic and semiconducting particles produced by bacteria and algae, respectively (Fig. 4).

Download Full-text