Synthesis of a novel ZnAl2O4/CuS nanocomposite and its characterization for photocatalytic degradation of acid red 1 under UV illumination

2022 ◽  
Vol 889 ◽  
pp. 161708
Author(s):  
Youssef Fahoul ◽  
Morad Zouheir ◽  
Karim Tanji ◽  
Abdelhak Kherbeche
Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 71
Author(s):  
Gregorio Flores-Carrasco ◽  
Micaela Rodríguez-Peña ◽  
Ana Urbieta ◽  
Paloma Fernández ◽  
María Eugenia Rabanal

This paper reports on the synthesis of Ce-doped ZnO (CZO) nanoparticles (NPs) by an alternative polyol method at low temperature. The method, facile and rapid, uses acetate-based precursors, ethylene glycol as solvent, and polyvinylpyrrolidone as capping agent. The effects of the Ce-doping concentration (ranging from 0 to 8.24 atomic%) on the structural, morphological, compositional, optical, luminescence, and photocatalytic properties of the NPs were investigated by several techniques. The structural findings confirmed that the CZO NPs have a typical hexagonal wurtzite-type structure with a preferred orientation along the (101) plane. The results obtained by Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM) revealed that the NPs size decreased (from ~30 to ~16 nm) with an increase in the Ce-doping concentration. Energy Dispersive X-Ray Spectroscopy (EDS) and High Resolution Transmission Microscopy (HRTEM) results confirmed the incorporation of Ce ions into the ZnO lattice. Ce-doping influences the photoluminescence (PL) emission compared to that of pure ZnO. The PL emission is related to the presence of different kinds of defects, which could take part in charge transfer and/or trapping mechanisms, hence playing an essential role in the photocatalytic activity (PCA). In fact, in this work we report an enhancement of PCA as a consequence of Ce-doping. In this sense, the best results were obtained for samples doped with 3.24 atomic%, that exhibited a photocatalytic degradation efficiency close to 99% after 60 min ultraviolet (UV) illumination, thus confirming the viability of Ce-doping for environmental applications.


Catalysts ◽  
2016 ◽  
Vol 6 (11) ◽  
pp. 167 ◽  
Author(s):  
Syazwan Meriam Suhaimy ◽  
Sharifah Abd Hamid ◽  
Chin Lai ◽  
Md. Hasan ◽  
Mohd Johan

2021 ◽  
Vol 59 (10) ◽  
pp. 745-753
Author(s):  
Sang-Jun Park ◽  
Jeong-Hwan Song

Using ethylene glycol (C2H6O2) as the solvent, ZnS particles were synthesized in high yield at a relatively low temperature of 125 oC via the glycothermal method. We report a facile method for preparing spherical self-aggregated ZnS particles from ZnS nanocrystals, using zinc acetate as the Zn2+ source and thiourea as a sulfur source, without mineralization or other agents. The crystal phase structure, morphology, size, surface chemical composition, and optical properties of the self-aggregated ZnS particles were characterized using XRD, FE-SEM, TEM, XPS, BET, and UV-Vis absorption. The ZnS particles had a cubic phase zinc blende structure without any other impurities. The average crystallite size of the synthesized primary nanocrystal, estimated from XRD peak width and TEM images, was nearly 4 nm. FE-SEM images showed that all of the ZnS consisted of self-aggregated particles with a spherical morphology and a size of approximately 0.2 µm~0.5 µm, and contained many tiny primary nanocrystals. The prepared ZnS exhibited strong photoabsorption in the UV region. The optical band gap decreased from 3.85 eV to 3.62 eV as the glycothermal reaction temperature was increased, due to improvement in particle size and crystallization. The effects of the glycothermal reaction temperature on the photocatalytic activity of the synthesized selfaggregated ZnS particles were investigated by the photodecomposition of methyl orange (MO) dye under UV illumination (λ = 365 nm). The prepared ZnS exhibited excellent photocatalytic degradation with increasing reaction temperature, of 125 oC (5%), 150 oC (10%), 175 oC (60%), and 200 oC (90%) after irradiation for 60 min. It was found that the ZnS particle prepared at 200 oC achieved the highest photocatalytic degradation, with nearly 100% MO decomposition after 90 min, by various photogenerated radical scavengers.


2017 ◽  
Vol 433 ◽  
pp. 354-362 ◽  
Author(s):  
Jin Liu ◽  
Wei Lu ◽  
Qian Zhong ◽  
Xiaodan Jin ◽  
Lanyue Wei ◽  
...  

2014 ◽  
Vol 2 (4) ◽  
pp. 15-20
Author(s):  
Ramzan ali Dianati ◽  
Mohammad Ali Zazouli ◽  
Jamshid Yazdani-Charati ◽  
Sara Ashrafi ◽  
Ehsan Rostamali ◽  
...  

2021 ◽  
Vol 59 (10) ◽  
pp. 732-740
Author(s):  
Sang-Jun Park ◽  
Jeong-Hwan Song

Using ethylene glycol (C2H6O2) as the solvent, ZnS particles were synthesized in high yield at a relatively low temperature of 125 oC via the glycothermal method. We report a facile method for preparing spherical self-aggregated ZnS particles from ZnS nanocrystals, using zinc acetate as the Zn2+ source and thiourea as a sulfur source, without mineralization or other agents. The crystal phase structure, morphology, size, surface chemical composition, and optical properties of the self-aggregated ZnS particles were characterized using XRD, FE-SEM, TEM, XPS, BET, and UV-Vis absorption. The ZnS particles had a cubic phase zinc blende structure without any other impurities. The average crystallite size of the synthesized primary nanocrystal, estimated from XRD peak width and TEM images, was nearly 4 nm. FE-SEM images showed that all of the ZnS consisted of self-aggregated particles with a spherical morphology and a size of approximately 0.2 µm~0.5 µm, and contained many tiny primary nanocrystals. The prepared ZnS exhibited strong photoabsorption in the UV region. The optical band gap decreased from 3.85 eV to 3.62 eV as the glycothermal reaction temperature was increased, due to improvement in particle size and crystallization. The effects of the glycothermal reaction temperature on the photocatalytic activity of the synthesized selfaggregated ZnS particles were investigated by the photodecomposition of methyl orange (MO) dye under UV illumination (λ = 365 nm). The prepared ZnS exhibited excellent photocatalytic degradation with increasing reaction temperature, of 125 oC (5%), 150 oC (10%), 175 oC (60%), and 200 oC (90%) after irradiation for 60 min. It was found that the ZnS particle prepared at 200 oC achieved the highest photocatalytic degradation, with nearly 100% MO decomposition after 90 min, by various photogenerated radical scavengers.


Sign in / Sign up

Export Citation Format

Share Document