Oxidation of soot over supported RuRe nanoparticles prepared by the microwave-polyol method

The oxidation of soot over RuRe bimetallic nanoparticles (NPs) supported on γ-Al2O3 has been investigated. The catalysts were synthesized by a microwave-polyol method and characterized by ICP, BET, TEM, STEM-EDS, XRD and XPS techniques. The study revealed that the proper choice of the Re loading (0.4–2.0 wt%) is crucial for the catalytic behavior of the 2% Ru–Re/Al2O3 nano-catalysts.The best catalytic properties, in terms of overall activity and stability, were observed for the 2%Ru-0.8%Re/γ-Al2O3 nano-catalyst. The stability of all bimetallic 2% Ru–Re nano-catalysts in catalytic soot oxidation in the presence of oxygen is very high in contrast to the 2% Ru/γ-Al2O3 sample. The presence of rhenium in the catalytic system hinder the formation of large RuO2 agglomerates leading to a better dispersion of active ruthenium phase and a better catalytic performance. The relationship between the catalytic activity of Ru–Re/γ-Al2O3 and the synergetic roles of Ru and Re is discussed.

Structure and Optical Property of Gold Nanoparticles Synthesized by Modified Polyol Method

In this research, Au nanoparticles were successfully synthesized by modified polyol method with commercial precursors to be gold (III) chloride trihydrate (HAuCl4·3H2O), ethylene glycol (EG), poly(vinylpyrrolidone) (PVP), sodium borohydride (NaBH4). The structure and properties of as-prepared Au nanoparticles have been investigated by X ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis-NIR spectroscopy. As a result, Au nanoparticles with the average particle size of 28.80 nm were successfully synthesized in the range of about 50 nm. It is evidenced that the assembly of gold nanoparticles was presented in their nucleation, growth, and formation.

Engineering Iron Oxide Nanocatalysts by a Microwave-Assisted Polyol Method for the Magnetically Induced Degradation of Organic Pollutants

Advanced oxidation processes constitute a promising alternative for the treatment of wastewater containing organic pollutants. Still, the lack of cost-effective processes has hampered the widespread use of these methodologies. Iron oxide magnetic nanoparticles stand as a great alternative since they can be engineered by different reproducible and scalable methods. The present study consists of the synthesis of single-core and multicore magnetic iron oxide nanoparticles by the microwave-assisted polyol method and their use as self-heating catalysts for the degradation of an anionic (acid orange 8) and a cationic dye (methylene blue). Decolorization of these dyes was successfully improved by subjecting the catalyst to an alternating magnetic field (AMF, 16 kA/m, 200 kHz). The sudden temperature increase at the surface of the catalyst led to an intensification of 10% in the decolorization yields using 1 g/L of catalyst, 0.3 M H2O2 and 500 ppm of dye. Full decolorization was achieved at 90 °C, but iron leaching (40 ppm) was detected at this temperature leading to a homogeneous Fenton process. Multicore nanoparticles showed higher degradation rates and 100% efficiencies in four reusability cycles under the AMF. The improvement of this process with AMF is a step forward into more sustainable remediation techniques.