Removal of acetaminophen from synthetic wastewater in a fixed-bed column adsorption using low-cost coconut shell waste pretreated with NaOH, HNO3, ozone, and/or chitosan

2018 ◽  
Vol 226 ◽  
pp. 365-376 ◽  
Author(s):  
Lin Yanyan ◽  
Tonni Agustiono Kurniawan ◽  
Mengting Zhu ◽  
Tong Ouyang ◽  
Ram Avtar ◽  
...  
2013 ◽  
Vol 68 (10) ◽  
pp. 2158-2163 ◽  
Author(s):  
Shenglong Zhang ◽  
Randi Zhang ◽  
Wei Xiao ◽  
Runping Han

Natural peanut husk (NPH) modified with hexadecyl trimethyl ammonium bromide (CTAB) was used as adsorbent to remove 2,5-dimethoxy-4-chloroaniline (DMCH) from solution in a fixed-bed column. Fourier transform infrared spectroscopy analysis and X-ray fluorescence of NPH and modified peanut husk (MPH) showed that CTAB had been introduced onto the surface of NPH. The effects of flow rate and bed depth on breakthrough curves were studied. The Thomas model and the Yan model were selected to fit the column adsorption data and the results showed that the Yan model was better at predicting the breakthrough curves. The adsorption quantity was up to 6.46 mg/g according to the Yan model. The bed depth service time model was used to calculate the critical bed depth from experimental data and it was directly related to flow rate. As a low-cost adsorbent, MPH is promising for the removal of DMCH from solution.


2008 ◽  
Vol 47 (18) ◽  
pp. 6999-7004 ◽  
Author(s):  
Ayşegul Faki ◽  
Mustafa Turan ◽  
Ozgur Ozdemir ◽  
Abdullah Zahid Turan

2021 ◽  
Vol 209 ◽  
pp. 280-288
Author(s):  
Serdar Aydın ◽  
Hamda Mowlid Nur ◽  
Abdoulaye Mamadou Traore ◽  
Eren Yıldırım ◽  
Serkan Emik

Author(s):  
Kouassi Kouadio Dobi-Brice ◽  
Yacouba Zoungranan ◽  
Dje Daniel Yannick ◽  
Ekou Lynda ◽  
Ekou Tchirioua

Aims: Pollution by wastewaters from various urban activities such as artisanal dyeing plants is a real problem for developing countries. The treatment of wastewater by the adsorption method is carried out by means of less expensive and available adsorbent media. Two techniques of the adsorption method are possible: adsorption in continuous mode (column adsorption) and adsorption in discontinuous mode (batch adsorption). The choice of the continuous adsorption technique is justified by its ability to process large volumes of solutions. In this study, dyes contained in wastewater from artisanal dyeing plants were removed by continuous adsorption in a fixed-bed column of deactivated lichen biomass (Parmotrema dilatatum). Study Design: Random design Place and Duration of Study: Laboratory of Thermodynamics and Environmental Physico-Chemistry (University Nangui Abrogoua, Ivory Coast) between May 2020 and October 2020. Methodology: Four (4) categories of wastewater were collected in artisanal cotton and leather dyeing plants through two municipalities of the city of Abidjan, economic capital of Ivory Coast. Two (2) wastewaters colored in blue from dyeing of cotton boubous and jeans and two (2) wastewaters colored in red from dyeing of leather jackets and bags. These wastewaters were treated through the fixed bed column of deactivated lichens. The column feed rate was set at 0, 07 L.min-1 and the adsorbent bed mass at 100 g. Results: The study showed that, regardless of the nature of the dyed object and regardless of the target dye, the amount of dye adsorbed was better with waters of higher initial concentration. Thus the best amount of adsorbed dye is 44.444 mg.g-1 and the best removal rate is 97.9%. These values are obtained with the red wastewater of bags (RWB) treatment which was the most concentrated wastewater. Conclusion: Good efficiency of deactivated lichen bed as adsorbent for the in situ removal of dyes from wastewater by continuous adsorption.


2011 ◽  
Vol 64 (3) ◽  
pp. 654-660 ◽  
Author(s):  
Xiuli Han ◽  
Wei Wang ◽  
Xiaojian Ma

The adsorption potential of lotus leaf to remove methylene blue (MB) from aqueous solution was investigated in batch and fixed-bed column experiments. Langmuir, Freundlich, Temkin and Koble–Corrigan isotherm models were employed to discuss the adsorption behavior. The results of analysis indicated that the equilibrium data were perfectly represented by Temkin isotherm and the Langmuir saturation adsorption capacity of lotus leaf was found to be 239.6 mg g−1 at 303 K. In fixed-bed column experiments, the effects of flow rate, influent concentration and bed height on the breakthrough characteristics of adsorption were discussed. The Thomas and the bed-depth/service time (BDST) models were applied to the column experimental data to determine the characteristic parameters of the column adsorption. The two models were found to be suitable to describe the dynamic behavior of MB adsorbed onto the lotus leaf powder column.


Sign in / Sign up

Export Citation Format

Share Document