scholarly journals The fold-thrust belt stress cycle: Superposition of normal, strike-slip, and thrust faulting deformation regimes

2021 ◽  
Vol 148 ◽  
pp. 104362
Author(s):  
David A. Ferrill ◽  
Kevin J. Smart ◽  
Adam J. Cawood ◽  
Alan P. Morris
2020 ◽  
Author(s):  
David A. Ferrill ◽  
◽  
Kevin J. Smart ◽  
Alan P. Morris ◽  
Adam J. Cawood

2020 ◽  
Author(s):  
Saskia Köhler ◽  
Florian Duschl ◽  
Hamed Fazlikhani ◽  
Daniel Köhn

<p>The Franconian Basin in SE Germany has seen a complex stress history indicative of several extensional and compressional phases e.g. the Iberia-Europe collision acting on a pre-faulted Variscan basement. Early Cretaceous extension is followed by Late Cretaceous inversion with syntectonic sedimentation and deformation increasing progressively from SW to NE culminating in the Franconian Line where basement rocks are thrusted over the Mesozoic cover. The development of this intracontinental fold-and-thrust belt is followed by Paleogene extension associated with the formation of the Eger Graben, which is then succeeded by a new compressional event as a consequence of the Alpine orogeny.</p><p>We use existing data from literature and geological maps and new field data to construct balanced cross-sections in order to reveal the architecture of the Cretaceous fold-and-thrust belt. In addition, we undertake paleostress analysis using a combination of fault slip information, veins and tectonic and sedimentary stylolites to identify stress events in the study area, as well as their nature and timing. Furthermore, we try to understand how basement faults influence younger faults in the cover sequence.</p><p>Our paleostress data indicates that at least five different stress events existed in Mesozoic to Cenozoic times (from old to young): (1) an N-S directed extensional stress field with E-W striking normal faults, (2) a NNE-SSW directed compressional stress field causing thrusting and folding of the cover sequence, (3) a strike slip regime with NE-SW compression and NW-SE extension, (4) an extensional event with NW-SE extension and the formation of ENE-WSW striking faults according to the formation of the Eger Graben in the E, and finally (5) a strike slip regime with NW-SE compression and NE-SW extension related to Alpine stresses. The geometry of faulting and deformation varies significantly over the regions with respect to the influence of and distance to inherited Variscan structures.</p><p>We argue that the extensional event of stress field (1) provides spacing for Early Cretaceous sedimentation in the Franconian Basin. This is followed by the creation of an intracontinental fold-and-thrust belt during stress fields (2) and (3) with a slight rotation of the main compressive stress during these events in Late Cretaceous. We associate the following extension to the development of the Eger Graben in Miocene time. Finally, a NW-SE directed compression related to Alpine stresses in an intracontinental strike-slip regime is following. Reconstruction of the Cretaceous fold-and-thrust belt reveals mainly fault propagation folding with deep detachments sitting below the cover sequence indicating thick-skinned tectonics. We argue that the Franconian Line is a thrust with a steeply dipping root that belongs to the same fold-and-thrust belt.</p>


1979 ◽  
Vol 16 (3) ◽  
pp. 770-791 ◽  
Author(s):  
J. W. H. Monger ◽  
R. A. Price

The present geodynamic pattern of the Canadian Cordillera, the main features of which were probably established in Miocene time, involves a combination of right-hand strike-slip movements on transform faults along the continental margin, and, in the south and extreme north, convergence in subduction zones in which oceanic lithosphere moves beneath the continent, with consequent magmatism along the continental margin. In the southern Canadian Cordillera, geophysical surveys have outlined the subducting slab and the asthenospheric bulge that occurs beneath and behind the magmatic arc. They also show that there is now no root of thickened Precambrian continental crust beneath the tectonically shortened supracrustal strata in the southern parts of the Omineca Crystalline Belt and Rocky Mountain Belt.The Rocky Mountain, Omineca Crystalline, Intermontane, Coast Plutonic, and Insular Belts, the structural and physiographic provinces that dominate the present configuration of the Canadian Cordillera, were established with the initial uplift and the intrusion of granitic rocks in the Omineca Crystalline Belt in Middle and Late Jurassic time and in the Coast Plutonic Complex in Early Cretaceous time, and they dominated patterns of uplift, erosion and deposition through Cretaceous and Paleogene time. Their development may be due to compression with thrust faulting in the eastern Cordillera, and to magmatism that accompanied subduction and to accretion of an exotic terrane, Wrangellia, in the western Cordillera. Major right-lateral strike-slip faulting, which occurred well east of but sub-parallel with the continental margin during Late Cretaceous and Paleogene time, accompanied major tectonic shortening due to thrusting and folding in the Rocky Mountain Belt as well as the main subduction-related (?) magmatism in the Coast Plutonic Complex.The configuration of the western Cordillera prior to late Middle Jurassic time is enigmatic. Late Paleozoic and early Mesozoic volcanogenic strata form a complex collage of volcanic arcs and subduction complexes that was assembled mainly in the Mesozoic. The change in locus of deposition between Upper Triassic and Lower to Middle Jurassic volcanogenic assemblages, and the thrust faulting in the northern Cordillera may record emplacement of another exotic terrane, the Stikine block, in latest Triassic to Middle Jurassic time.The earliest stage in the evolution of the Cordilleran fold belt involved the protracted (1500 to 380 Ma) development of a northeasterly tapering sedimentary wedge that discordantly overlaps Precambrian structures of the cratonic basement. This miogeoclinal wedge may be a continental margin terrace wedge that was prograded into an ocean basin, but it has features that may be more indicative of progradation into a marginal basin in which there was intermittent volcanic activity, than into a stable expanding ocean basin of the Atlantic type.


2009 ◽  
Vol 178 (1) ◽  
pp. 524-540 ◽  
Author(s):  
Christine Authemayou ◽  
Olivier Bellier ◽  
Dominique Chardon ◽  
Lucilla Benedetti ◽  
Zaman Malekzade ◽  
...  

2010 ◽  
Vol 61 (6) ◽  
pp. 483-493 ◽  
Author(s):  
Márton Palotai ◽  
László Csontos

Strike-slip reactivation of a Paleogene to Miocene fold and thrust belt along the central part of the Mid-Hungarian Shear ZoneRecently shot 3D seismic data allowed for a detailed interpretation, aimed at the tectonic evolution of the central part of the Mid-Hungarian Shear Zone (MHZ). The MHZ acted as a NW vergent fold and thrust belt in the Late Oligocene. The intensity of shortening increased westwards, causing clockwise rotation of the western regions, relatively to the mildly deformed eastern areas. Blind thrusting and related folding in the MHZ continued in the Early Miocene. Thrusting and gentle folding in the MHZ partly continued in the earliest Pannonian, and was followed by sinistral movements in the whole MHZ, with maximal displacement along the Tóalmás zone. Late Pannonian inversion activated thrusts and generated transpressional movements along the Tóalmás zone.


Solid Earth ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1967-1986
Author(s):  
Dario Zampieri ◽  
Paola Vannoli ◽  
Pierfrancesco Burrato

Abstract. We make a thorough review of geological and seismological data on the long-lived Schio-Vicenza Fault System (SVFS) in northern Italy and present for it a geodynamic and seismotectonic interpretation. The SVFS is a major and high-angle structure transverse to the mean trend of the eastern Southern Alps fold-and-thrust belt, and the knowledge of this structure is deeply rooted in the geological literature and spans more than a century and a half. The main fault of the SVFS is the Schio-Vicenza Fault (SVF), which has a significant imprint in the landscape across the eastern Southern Alps and the Veneto-Friuli foreland. The SVF can be divided into a northern segment, extending into the chain north of Schio and mapped up to the Adige Valley, and a southern one, coinciding with the SVF proper. The latter segment borders to the east the Lessini Mountains, Berici Mountains and Euganei Hills block, separating this foreland structural high from the Veneto-Friuli foreland, and continues southeastward beneath the recent sediments of the plain via the blind Conselve–Pomposa fault. The structures forming the SVFS have been active with different tectonic phases and different styles of faulting at least since the Mesozoic, with a long-term dip-slip component of faulting well defined and, on the contrary, the horizontal component of the movement not being well constrained. The SVFS interrupts the continuity of the eastern Southern Alps thrust fronts in the Veneto sector, suggesting that it played a passive role in controlling the geometry of the active thrust belt and possibly the current distribution of seismic release. As a whole, apart from moderate seismicity along the northern segment and few geological observations along the southern one, there is little evidence to constrain the recent activity of the SVFS. In this context, the SVFS, and specifically its SVF strand, has accommodated a different amount of shortening of adjacent domains of the Adriatic (Dolomites) indenter by internal deformation produced by lateral variation in strength, related to Permian–Mesozoic tectonic structures and paleogeographic domains. The review of the historical and instrumental seismicity along the SVFS shows that it does not appear to have generated large earthquakes during the last few hundred years. The moderate seismicity points to a dextral strike-slip activity, which is also corroborated by the field analysis of antithetic Riedel structures of the fault cropping out along the northern segment. Conversely, the southern segment shows geological evidence of sinistral strike-slip activity. The apparently conflicting geological and seismological data can be reconciled considering the faulting style of the southern segment as driven by the indentation of the Adriatic plate, while the opposite style along the northern segment can be explained in a sinistral opening “zipper” model, where intersecting pairs of simultaneously active faults with a different sense of shear merge into a single fault system.


Sign in / Sign up

Export Citation Format

Share Document