Structural damage identification of the highway bridge Z24 by FE model updating

2004 ◽  
Vol 278 (3) ◽  
pp. 589-610 ◽  
Author(s):  
A. Teughels ◽  
G. De Roeck
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Highway Bridge ◽  
Fe Model ◽  
Structural Damage Identification ◽  
Fe Model Updating

Review and Prospect on Dynamic FE Model Updating Methods of Footbridge Structures Based on Ambient Excitation

2011 ◽  
Vol 291-294 ◽  
pp. 1572-1577
Author(s):  
Rui Zhao ◽  
Yi Gang Zhang
Keyword(s):  
Structural Damage ◽  
Optimization Design ◽  
Damage Identification ◽  
Model Updating ◽  
Target Function ◽  
Optimization Theory ◽  
Empirical Method ◽  
Fe Model ◽  
Fe Model Updating ◽  
Ambient Excitation

The discrete finite element (FE) model often cannot reflect structure characteristics accurately due to imply more idealistic assumptions and simplifications. Therefore, it is necessary to update FE model for structural damage identification, response calculation, safety evaluation, optimization design, and so on. This article will illustrate respectively three key steps of updating parameters selection, target function selection and optimization method in process of dynamic FE model updating of footbridge structures based on ambient excitation, and put forward a feasible updating method: combine empirical method with sensitivity analysis method to select updating parameters; joint natural frequencies, MAC and modal flexibility as target function; adopt optimization algorithm based on the optimization theory.

Structural Damage Identification Based on Model Updating

2006 ◽  
Author(s):  
T. Yin ◽  
L. Yu ◽  
H. P. Zhu
Keyword(s):  
Objective Function ◽  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Frame Structure ◽  
Mode Shapes ◽  
Fe Model ◽  
Portal Frame ◽  
Structural Damage Identification ◽  
Portal Frame Structure

This paper presents a new method for structural damage identification based on the finite element (FE) model updating techniques. First, an objective function is defined as minimizing the sum of differences between the experimental and analytical modal data (natural frequencies and mode shapes), which is set as a nonlinear least-squares problem with bound-constrains. The trust-region approach is then used to solve the minimization problem in order to make this optimization process more robust and reliable. In addition, the expansion and weighting of the original objective function are investigated so that the presented method can be well applied into the damage identification of more real structures. Finally, a numerical simulation model of two-story portal frame structure is adopted to evaluate the efficiency of the proposed technique when both the single and multiple damage cases are set up in the model. Some important issues are also discussed in this paper. The illustrated results show that the single and multiple damages on the two-story portal frame structure can be well identified by the proposed method.

Local Mass Addition and Data Fusion for Structural Damage Identification Using Approximate Models

2020 ◽  
Vol 20 (11) ◽  
pp. 2050124
Author(s):  
Jilin Hou ◽  
Zhenkun Li ◽  
Qingxia Zhang ◽  
Łukasz Jankowski ◽  
Haibin Zhang
Keyword(s):  
Data Fusion ◽  
Objective Function ◽  
Structural Damage ◽  
Damage Identification ◽  
Structural Parameters ◽  
Identification Accuracy ◽  
Fe Model ◽  
Local Damage ◽  
Approximate Models ◽  
Structural Damage Identification

In practical civil engineering, structural damage identification is difficult to implement due to the shortage of measured modal information and the influence of noise. Furthermore, typical damage identification methods generally rely on a precise Finite Element (FE) model of the monitored structure. Pointwise mass alterations of the structure can effectively improve the quantity and sensitivity of the measured data, while the data fusion methods can adequately utilize various kinds of data and identification results. This paper proposes a damage identification method that requires only approximate FE models and combines the advantages of pointwise mass additions and data fusion. First, an additional mass is placed at different positions throughout the structure to collect the dynamic response and obtain the corresponding modal information. The resulting relation between natural frequencies and the position of the added mass is sensitive to local damage, and it is thus utilized to form a new objective function based on the modal assurance criterion (MAC) and [Formula: see text]-based sparsity promotion. The proposed objective function is mostly insensitive to global structural parameters, but remains sensitive to local damage. Several approximate FE models are then established and separately used to identify the damage of the structure, and then the Dempster–Shafer method of data fusion is applied to fuse the results from all the approximate models. Finally, fractional data fusion is proposed to combine the results according to the parametric probability distribution of the approximate FE models, which allows the natural weight of each approximate model to be determined for the fusion process. Such an approach circumvents the need for a precise FE model, which is usually not easy to obtain in real application, and thus enhances the practical applicability of the proposed method, while maintaining the damage identification accuracy. The proposed approach is verified numerically and experimentally. Numerical simulations of a simply supported beam and a long-span bridge confirm that it can be used for damage identification, including a single damage and multiple damages, with a high accuracy. Finally, an experiment of a cantilever beam is successfully performed.

A frequency response-based structural damage identification using model updating method

2015 ◽  
Vol 23 (2) ◽  
pp. 286-302 ◽  
Author(s):  
Fariba Shadan ◽  
Faramarz Khoshnoudian ◽  
Akbar Esfandiari
Keyword(s):  
Frequency Response ◽  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Structural Damage Identification

scholarly journals A Steel-Concrete Composite Beam Element for Structural Damage Identification

2020 ◽  
Vol 20 (10) ◽  
pp. 2042015
Author(s):  
Faraz Sadeghi ◽  
Jianchun Li ◽  
Xinqun Zhu
Keyword(s):  
Composite Beam ◽  
Composite Structures ◽  
Structural Damage ◽  
Damage Identification ◽  
Beam Element ◽  
Bonding Interface ◽  
Fe Model ◽  
Static Responses ◽  
Structural Damage Identification ◽  
Interface Layers

The composite action between the layers of steel and concrete is governed by the shear connection. Because of the complicated interconnection behavior of these composite layers, it is difficult to detect damage in the composite structures, especially, the interfacial integrity of the two layers. In this paper, anovel method has been developed for structural damage identification of composite structures based on a steel-concrete composite beam element with bonding interface. In displacement-based finite element (FE) formulation, three damage indicators have been embedded into stiffness matrix of the composite beam that are defined as a stiffness reduction in the concrete, steel and interface layers. An algorithm-based on recursive quadratic programming has been proposed to identify structural damage in the composite beam from static measurements. The analytical FE model is validated by adapting its static responses in undamaged state with those obtained from an equal experimental model as well as a FE model developed in commercial software ABAQUS. A convergence study is conducted to determine the number of the composite beam FEs. To verify the proposed method, the static responses of the FE model with different damage cases at a given loading are calculated, and the measurements are simulated by adding different levels of white noise. Then, the proposed algorithm is applied to identify damage of the composite beam. The effects of measurement noise, loading location and amplitude, measurement numbers and the sizes of FE mesh on the identified results have been investigated. The numerical results show that this method is efficient and accurate to separately identify small damage in the concrete slab, and the steel girder and bonding interface of the composite beam.

Structural Damage Identification Method Based On Transmissibility in Time Domain

2021 ◽  
Author(s):  
Yunfeng Zou ◽  
Xuandong Lu ◽  
Jinsong Yang ◽  
Xuhui He ◽  
Tiantian Wang
Keyword(s):  
Time Domain ◽  
Structural Damage ◽  
High Efficiency ◽  
Damage Identification ◽  
Identification Accuracy ◽  
Reconstruction Method ◽  
Fe Model ◽  
Time Frequency ◽  
Identification Method ◽  
Structural Damage Identification

Abstract Structural damage identification technology is of great significance to improve the reliability and safety of civil structures and has attracted much attention in the study of structural health monitoring. In this paper, a novelty structural damage identification method based on the transmissibility in time domain is proposed. The method takes the discrepancy of transmissibility of structure response in time domain before and after damage as the basis of finite element model modification. The damage location and damage degree are obtained through iteration by minimizing the difference between the measurements at gauge locations and the reconstruction response extrapolated by FE model. Taking the advantage of the response reconstruction method based on empirical mode decomposition, the damage information is possible to obtain in the absence of prior knowledge on external excitation information. Moreover, this method is carried out in the time domain, without the need to identify the modal parameters and perform time-frequency analysis, which simplicity ensures the high efficiency of damage identification. The effectiveness and accuracy of the proposed method are studied by simulation, including reconstruction error and measurement noise. The identification results demonstrate that the proposed structural damage identification method improves the calculation effectiveness considerably and ensures the identification accuracy.

Sign in / Sign up

Export Citation Format

Share Document