Microstructural evolution in adiabatic shear bands of copper at high strain rates: Electron backscatter diffraction characterization

2012 ◽  
Vol 64 ◽  
pp. 21-26 ◽  
Author(s):  
Lin Tang ◽  
Zhiyong Chen ◽  
Congkun Zhan ◽  
Xuyue Yang ◽  
Chuming Liu ◽  
...  
Keyword(s):  
Microstructural Evolution ◽  
High Strain ◽  
Electron Backscatter Diffraction ◽  
Shear Bands ◽  
Adiabatic Shear ◽  
Strain Rates ◽  
Adiabatic Shear Bands ◽  
High Strain Rates ◽  
Electron Backscatter ◽  
Backscatter Diffraction

Analysis and characterization by electron backscatter diffraction of microstructural evolution in the adiabatic shear bands in Fe–Cr–Ni alloys

2009 ◽  
Vol 24 (8) ◽  
pp. 2617-2627 ◽  
Author(s):  
Huajie Yang ◽  
Yongbo Xu ◽  
Yasuaki Seki ◽  
Vitali F. Nesterenko ◽  
Marc André Meyers
Keyword(s):  
Microstructural Evolution ◽  
Electron Backscatter Diffraction ◽  
Shear Bands ◽  
Adiabatic Shear ◽  
Adiabatic Shear Bands ◽  
Localized Deformation ◽  
Ni Alloys ◽  
Electron Backscatter ◽  
Backscatter Diffraction ◽  
Equiaxed Grains

The microstructural evolution inside adiabatic shear bands in Fe–Cr–Ni alloys dynamically deformed (strain rates > 104 s−1) by the collapse of an explosively driven, thick-walled cylinder under prescribed strain conditions was examined by electron backscatter diffraction. The observed structure within the bands consisted of both equiaxed and elongated grains with a size of ∼200 nm. These fine microstructures can be attributed to recrystallization; it is proposed that the elongated grains may be developed simultaneously with localized deformation (dynamic recrystallization), and the equiaxed grains may be formed subsequently to deformation (static recrystallization). These recrystallized structures can be explained by a rotational recrystallization mechanism.

Inspection of Adiabatic Shear Bands in High Manganese TRIP Steels

2013 ◽  
Vol 753 ◽  
pp. 72-75 ◽  
Author(s):  
Hui Zhen Wang ◽  
Xiu Rong Sun ◽  
Ping Yang ◽  
Wei Min Mao
Keyword(s):  
Shear Failure ◽  
High Strain ◽  
Shear Bands ◽  
Adiabatic Shear ◽  
Strain Rates ◽  
Trip Effect ◽  
Adiabatic Shear Bands ◽  
High Manganese ◽  
High Strain Rates ◽  
Trip Steels

Adiabatic shear bands (ASBs) develop generally during high strain rates. This paper investigates the transformation induced plasticity (TRIP) effect during ASBs formation at high strain rates in high manganese TRIP steels containing initial austenite and ferrite by EBSD technique. Results show that TRIP effect takes place mainly before the formation of ASBs. After ASBs formation, TRIP effect is strongly restricted by the size effect, the increase of stacking fault energy (SFE) and even inverse martensitic transformation due to the rise of temperature. The TRIP effect before ASBs formation contributes to the resistance of adiabatic shear failure. Dynamic recrystallization driven by subgrains rotation occurs within ASBs, and ultrafine grains often show strong shear textures with twin relationship owing to slip mechanism.

scholarly journals High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering

2021 ◽  
Vol 11 (17) ◽  
pp. 8005
Author(s):  
Amos Muiruri ◽  
Maina Maringa ◽  
Willie du Preez
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Electron Backscatter Diffraction ◽  
Dynamic Strength ◽  
Strain Rates ◽  
Direct Metal Laser Sintering ◽  
Heat Treated ◽  
Electron Backscatter ◽  
Backscatter Diffraction

For analysis of engineering structural materials to withstand harsh environmental conditions, accurate knowledge of properties such as flow stress and failure over conditions of high strain rate and temperature plays an essential role. Such properties of additively manufactured Ti6Al4V(ELI) are not adequately studied. This paper documents an investigation of the high strain rate and temperature properties of different forms of heat-treated Ti6Al4V(ELI) samples produced by the direct metal laser sintering (DMLS). The microstructure and texture of the heat-treated samples were analysed using a scanning electron microscope (SEM) equipped with an electron backscatter diffraction detector for electron backscatter diffraction (EBSD) analysis. The split Hopkinson pressure bar (SHPB) equipment was used to carry out tests at strain rates of 750, 1500 and 2450 s−1, and temperatures of 25, 200 and 500 °C. The heat-treated samples of DMLS Ti6Al4V(ELI) alloys tested here were found to be sensitive to strain rate and temperature. At most strain rates and temperatures, the samples with finer microstructure exhibited higher dynamic strength and lower strain, while the dynamic strength and strain were lower and higher, respectively, for samples with coarse microstructure. The cut surfaces of the samples tested were characterised by a network of well-formed adiabatic shear bands (ASBs) with cracks propagating along them. The thickness of these ASBs varied with the strain rate, temperature, and various alloy forms.

Sign in / Sign up

Export Citation Format

Share Document