Synthesis features, thermal behavior, and physical properties of Bi10Fe6Ti3O30 ceramic material

2021 ◽  
Vol 263 ◽  
pp. 124386
Author(s):  
Natalia Lomanova
Keyword(s):  
Physical Properties ◽  
Thermal Behavior ◽  
Ceramic Material

scholarly journals Extraordinary thermal behavior of graphene oxide in air for electrode applications

2021 ◽  
Author(s):  
Joong Tark Han ◽  
Joon Young Cho ◽  
Jeong Hoon Kim
Keyword(s):  
Thermal Stability ◽  
Graphene Oxide ◽  
Physical Properties ◽  
Thermal Behavior ◽  
Stability Of Solution ◽  
Exfoliated Graphene ◽  
Potential Applications ◽  
Thermal Stability Of

The thermal stability of solution-exfoliated graphene oxide (GO) in air is one of the most important physical properties influencing its potential applications. To date, majority of the GO prepared by...

Red Mud from Brazil: Thermal Behavior and Physical Properties

2011 ◽  
Vol 51 (2) ◽  
pp. 775-779 ◽  
Author(s):  
Maria Lúcia Pereira Antunes ◽  
Sara Jane Couperthwaite ◽  
Fabiano Tomazini da Conceição ◽  
Carolina Petrisin Costa de Jesus ◽  
Pedro Kunihiko Kiyohara ◽  
...  
Keyword(s):  
Physical Properties ◽  
Thermal Behavior ◽  
Red Mud

Evaluating the Effectiveness of Axial and Isostatic Pressing Methods of Ceramic Granular Powder

2014 ◽  
Vol 698 ◽  
pp. 472-477 ◽  
Author(s):  
Natalya Belousova ◽  
Sergey Veselov ◽  
Dmitriy Anufrienko ◽  
Olga Goryainova
Keyword(s):  
Flexural Strength ◽  
Physical Properties ◽  
Ceramic Material ◽  
Bending Strength ◽  
Medium Size ◽  
Sintered Ceramic ◽  
Isostatic Pressing ◽  
Ceramic Samples

The paper assesses the effectiveness of uniaxial and cold isostatic consolidation methods of medium size ceramic granular press-powders. The results of fractographic studies of raw compacts were obtained with different methods of forming. The estimation of the physical properties of raw compacts and sintered ceramic samples was done. The results of measurement of the bending strength of the ceramic material are shown. It has been established that the application of isostatic forming, compared with axial allows increasing the flexural strength of the ceramic material is more than 35% due to creating denser structure and enhancing adhesion between the granules under otherwise equal technological conditions

scholarly journals Reciclagem dos resíduos sólidos de rochas ornamentais: the case of waste of the dimension stones

2005 ◽  
Vol 28 (2) ◽  
pp. 139-151
Author(s):  
Heitor Fernandes Mothé Filho ◽  
Helena Polivanov ◽  
Cheila Gonçalves Mothé
Keyword(s):  
Physical Properties ◽  
Ceramic Material ◽  
Mineral Composition ◽  
Point Load ◽  
Load Test ◽  
Dimension Stone ◽  
Solid Residue ◽  
Sintering Process ◽  
Point Load Test ◽  
Stone Industry

Dimension stone industry produces a great amount of effluents, about 200,000 ton/year per solid residue. Espírito Santo State has about 600 companies, and their average consume per industry is around are 10,000 l/ day of water. Those rejects are displaced in decant lagoons, and landfill. In this work was used material provided by marble & granite industry from Cachoeiro de Itapemirim, ES. Those residues were characterized by chemical and mineral composition, physical properties, sintering process, and point load test. The results provided from physical indices and sintering material were compared with the results of commercial granite named in Industry as "granito rosa bavena". Analysis allowed us to get a conclusion about the reject. These analyses showed that reject could be used as a source for ceramic material, with the possibility of choosing for a greater or lower resistance.

Physical properties and thermal behavior of novel ternary green solvents

2019 ◽  
Vol 287 ◽  
pp. 110991 ◽  
Author(s):  
Andrea Škulcová ◽  
Veronika Majová ◽  
Tibor Dubaj ◽  
Michal Jablonský
Keyword(s):  
Physical Properties ◽  
Thermal Behavior ◽  
Green Solvents

Ceramics in dentistry: which material is appropriate for the anterior or posterior Dentition? Part 1: materials science

Dental Update ◽  
2021 ◽  
Vol 48 (8) ◽  
pp. 680-688
Author(s):  
Loo Chien Win ◽  
Peter Sands ◽  
Stephen J Bonsor ◽  
FJ Trevor Burke
Keyword(s):  
Mechanical Properties ◽  
Clinical Research ◽  
Physical Properties ◽  
Ceramic Material ◽  
Clinical Relevance ◽  
Materials Science ◽  
Clinical Performance ◽  
Lithium Disilicate ◽  
Ceramic Materials ◽  
Posterior Teeth

The large choice of ceramic materials for an indirect restoration has given clinicians a dilemma when choosing a suitable ceramic for restorations in anterior or posterior teeth. Focusing principally on the most commonly used materials, lithium disilicate and zirconia, the aim of Part 1 of this article is to compare the mechanical properties and aesthetics of these two materials. For strength, zirconia possesses superior physical properties when compared with lithium disilicate. However, in terms of aesthetics, lithium disilicate holds advantages. With both materials having different microstructures, the same cementation protocols cannot be used. Other contemporary ceramic materials are briefly reviewed. Part 2 reviews the latest clinical research on their clinical performance. CPD/Clinical Relevance: Awareness of which ceramic material performs optimally on anterior and posterior teeth is clinically important.

Physical Properties of Waste Lignin/HDPE Composites

2011 ◽  
Vol 221 ◽  
pp. 60-65 ◽  
Author(s):  
Tian Liu ◽  
Qing Wen Wang ◽  
Hui Zhao
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
Physical Properties ◽  
Thermal Behavior ◽  
Dimensional Stability ◽  
High Density Polyethylene ◽  
Lignin Content ◽  
Main Concern ◽  
Dsc Analysis ◽  
Effective Utilization

The effective utilization of lignin waste has been a main concern in the bio-ethanol industry which uses straw and stalks as feedstock. In this study the lignin waste was incorporated into high density polyethylene (HDPE) to make composites by extruded pellet fabrication and thermoform process. With the increasing of the lignin content from 55% to 75%, the static flexural strength of the resulting blends was hardly influenced, but the tensile strength decreased 42%. The mechanical and dimensional stability tests both showed that the addition of 4% MAPE promoted the interfacial bonding between lignin and HDPE. The DSC analysis showed the presence of lignin scarcely influences the thermal behavior of pure HDPE and the composites.

On the relevance of thermophysical characterization in the microwave treatment of legumes

2018 ◽  
Vol 9 (3) ◽  
pp. 1816-1828 ◽  
Author(s):  
Annalisa Dalmoro ◽  
Carlo Naddeo ◽  
Silvestro Caputo ◽  
Gaetano Lamberti ◽  
Liberata Guadagno ◽  
...  
Keyword(s):  
Physical Properties ◽  
Thermal Behavior ◽  
Microwave Treatment ◽  
Daily Diet ◽  
Thermophysical Characterization

This study is focused on the characterization of the thermal behavior and physical properties of the most consumed legumes in the daily diet such as beans, lentils and chickpeas.

Physical properties and structure of silk. V. Thermal behavior of silk fibroin in the random-coil conformation

1977 ◽  
Vol 15 (9) ◽  
pp. 1675-1683 ◽  
Author(s):  
Jun Magoshi ◽  
Yoshiko Magoshi ◽  
Shigeo Nakamura ◽  
Nobutami Kasai ◽  
Masao Kakudo
Keyword(s):  
Physical Properties ◽  
Thermal Behavior ◽  
Silk Fibroin ◽  
Random Coil
Sign in / Sign up

Export Citation Format

Share Document