Effect of grain and phase boundaries on soft magnetic properties of FeCoNiAlSi high-entropy alloys

2021 ◽  
pp. 129965
Author(s):  
Zhong Li ◽  
Jianing Qi ◽  
Zhuangzhuang Li ◽  
Hongxia Li ◽  
Hui Xu ◽  
...  
Metals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1907
Author(s):  
Jiaming Li ◽  
Jianliang Zuo ◽  
Hongya Yu

The microstructure, phase formation, thermal stability and soft magnetic properties of melt-spun high entropy alloys (HEAs) Fe27Co27Ni27Si10−xB9Lax with various La substitutions for Si (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) were investigated in this work. The Fe27Co27Ni27Si10−xB9La0.6 alloy shows superior soft magnetic properties with low coercivity Hc of ~7.1 A/m and high saturation magnetization Bs of 1.07 T. The content of La has an important effect on the primary crystallization temperature (Tx1) and the secondary crystallization temperature (Tx2) of the alloys. After annealing at relatively low temperature, the saturation magnetization of the alloy increases and the microstructure with a small amount of body-centered cubic (BCC) phase embedded in amorphous matrix is observed. Increasing the annealing temperature reduces the magnetization due to the transformation of BCC phase into face-centered cubic (FCC) phase.


2019 ◽  
Vol 171 ◽  
pp. 31-39 ◽  
Author(s):  
Chanwon Jung ◽  
Ku Kang ◽  
Amalraj Marshal ◽  
Konda Gokuldoss Pradeep ◽  
Jae-Bok Seol ◽  
...  

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4222 ◽  
Author(s):  
Zhongyuan Wu ◽  
Chenxu Wang ◽  
Yin Zhang ◽  
Xiaomeng Feng ◽  
Yong Gu ◽  
...  

High-entropy alloys (HEAs) with soft magnetic properties are one of the new candidate soft magnetic materials which are usually used under an alternating current (AC) magnetic field. In this work, the AC soft magnetic properties are investigated for FeCoNixCuAl (1.0 ≤ x ≤ 1.75) HEAs. The X-ray diffraction (XRD) and scanning electron microscope (SEM) show that the alloy consists of two phases, namely a face-centred cubic (FCC) phase and a body-centred cubic (BCC) phase. With increasing Ni content, the FCC phase content increased. Further research shows that the AC soft magnetic properties of these alloys are closely related to their phase constitution. Increasing the FCC phase content contributes to a decrease in the values of AC remanence (AC Br), AC coercivity (AC Hc) and AC total loss (Ps), while it is harmful to the AC maximum magnetic flux density (AC Bm). Ps can be divided into two parts: AC hysteresis loss (Ph) and eddy current loss (Pe). With increasing frequency f, the ratio of Ph/Ps decreases for all samples. When f ≤ 150 Hz, Ph/Ps > 70%, which means that Ph mainly contributes to Ps. When f ≥ 800 Hz, Ph/Ps < 40% (except for the x = 1.0 sample), which means that Pe mainly contributes to Ps. At the same frequency, the ratio of Ph/Ps decreases gradually with increasing FCC phase content. The values of Pe and Ph are mainly related to the electrical resistivity (ρ) and the AC Hc, respectively. This provides a direction to reduce Ps.


2020 ◽  
Vol 33 (10) ◽  
pp. 3189-3196
Author(s):  
A. Ghasemi ◽  
Kh. Zamani ◽  
M. Tavoosi ◽  
Gh.R. Gordani

2018 ◽  
Vol 100 ◽  
pp. 1-8 ◽  
Author(s):  
Tingting Zuo ◽  
Min Zhang ◽  
Peter K. Liaw ◽  
Yong Zhang

2019 ◽  
Vol 491 ◽  
pp. 165574 ◽  
Author(s):  
Rui-Feng Zhao ◽  
Bo Ren ◽  
Guo-Peng Zhang ◽  
Zhong-Xia Liu ◽  
Bin Cai ◽  
...  

Entropy ◽  
2016 ◽  
Vol 18 (8) ◽  
pp. 308 ◽  
Author(s):  
Pei-Chung Lin ◽  
Chun-Yang Cheng ◽  
Jien-Wei Yeh ◽  
Tsung-Shune Chin

2018 ◽  
Vol 33 (15) ◽  
pp. 2214-2222 ◽  
Author(s):  
Zhiqiang Fu ◽  
Benjamin E. MacDonald ◽  
Todd C. Monson ◽  
Baolong Zheng ◽  
Weiping Chen ◽  
...  

Abstract


Sign in / Sign up

Export Citation Format

Share Document