Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy

The true stress-strain data from isothermal hot compression tests on Gleeble-1500D thermo mechanical simulator, in a wide range of temperatures (350-450°C) and strain rates (0.001-1s-1), was employed to establish the PSO-BP network prediction model and 3D processing map of Mg-Sm-Zn-Zr alloy. It was found that the PSO-BP model could be efficient and accurate in predicting flow stress, most of relative errors were in the range of -4% to 6%, and the average relative error was found to be 1.52%. Then considering the effect of strain, the 3D processing map was established to characterize the hot workability of the alloy. The 3D processing map exhibited the maximum efficiency domain and the instability domain, which could be used to determine the optimal deformation conditions. The optimum processing parameters of Mg-Sm-Zn-Zr alloy were deformation temperatures of 400-450°C and strain rates of 0.003-0.1s-1.

Download Full-text

Microtwinning Evidence For The Apparent Five-Fold Symmetry in T2(Al6Li3Cu)

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100125178 ◽

1987 ◽

Vol 45 ◽

pp. 24-25

Author(s):

Kenneth S. Vecchio ◽

David B. Williams

Keyword(s):

Stable Equilibrium ◽

Equilibrium Phase ◽

Convergent Beam Electron Diffraction ◽

Icosahedral Structure ◽

Cubic Crystals ◽

Icosahedral Phases ◽

Heat Treated ◽

Zero Layer ◽

Convergent Beam ◽

Zr Alloy

Since the discovery in 1984 by Shechtman et al. of crystals which display apparent five-fold symmetry, extensive effort has been given to establishing a theoretical basis for the existence of icosahedral phases (eg.2.). Several other investigations have been centered on explaining these observations based on twinning of cubic crystals (eg.3.). Recently, the existence of a stable, equilibrium phase T2Al6 Li3Cu) possessing an icosahedral structure has been reported in the Al-Li-Cu system(4-6).In the present study an Al-2.6wt.%Li-l.5wt.%Cu-0.lwt.%Zr alloy was heat treated at 300°C for 100hrs. to produce large T2 precipitates. Convergent Beam Electron Diffraction (CBED) patterns were obtained from two-fold, three-fold, and apparent five-fold axes of T2 particles. Figure 1 shows the five-fold symmetric zero layer CBED pattern obtained from T2 particles.

Download Full-text

Deformation and fracture behavior of an Al-Li-Cu-Mg-Zr alloy 8090

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100178008 ◽

1990 ◽

Vol 48 (4) ◽

pp. 974-975

Author(s):

D.M. Jiang ◽

B.D. Hong

Keyword(s):

High Strength ◽

Deformation And Fracture ◽

Fracture Behaviors ◽

Aluminum Lithium ◽

Carbon Fiber Reinforced Composites ◽

Peak Aged ◽

Aluminum Lithium Alloys ◽

High Strength Aluminum Alloys ◽

Lithium Alloys ◽

Zr Alloy

Aluminum-lithium alloys have been recently got strong interests especially in the aircraft industry. Compared to conventional high strength aluminum alloys of the 2000 or 7000 series it is anticipated that these alloys offer a 10% increase in the stiffness and a 10% decrease in density, thus making them rather competitive to new up-coming non-metallic materials like carbon fiber reinforced composites.The object of the present paper is to evaluate the inluence of various microstructural features on the monotonic and cyclic deformation and fracture behaviors of Al-Li based alloy. The material used was 8090 alloy. After solution treated and waster quenched, the alloy was underaged (190°Clh), peak-aged (190°C24h) and overaged (150°C4h+230°C16h). The alloy in different aging condition was tensile and fatigue tested, the resultant fractures were observed in SEM. The deformation behavior was studied in TEM.

Download Full-text