Mechanical properties and microstructural evolution of pressureless sintered ceramics obtained from high-energy ball-milled TiB2–TiC powders

2021 ◽  
pp. 141510
Author(s):  
Mianyi Yao ◽  
Yujin Wang ◽  
Lei Chen ◽  
Jiahu Ouyang ◽  
Haixia Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Microstructural Evolution ◽  
High Energy ◽  
Energy Ball

scholarly journals Mechanochemical Synthesis and Rapid Consolidation of Nanocrystalline 3NiAl-Al2O3Composites

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
In-Jin Shon ◽  
In-Yong Ko ◽  
Seung-Hoon Jo ◽  
Jung-Mann Doh ◽  
Jin-Kook Yoon ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Mechanochemical Synthesis ◽  
High Frequency ◽  
Nanocrystalline Materials ◽  
Physical And Mechanical Properties ◽  
High Energy ◽  
Reinforced Composite ◽  
Energy Ball ◽  
High Frequency Induction

Nanopowders of 3NiAl and Al2O3were synthesized from 3NiO and 5Al powders by high-energy ball milling. Nanocrystalline Al2O3reinforced composite was consolidated by high-frequency induction-heated sintering within 3 minutes from mechanochemically synthesized powders of Al2O3and 3NiAl. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. The relative density of the composite was 97%. The average Vickers hardness and fracture toughness values obtained were 804 kg/mm2and 7.5 MPa⋅m1/2, respectively.

Carbon Nanotubes Reinforced Aluminum Matrix Composites by High-Energy Ball Milling

2010 ◽  
Vol 150-151 ◽  
pp. 1163-1166 ◽  
Author(s):  
Xiao Fei Wang ◽  
Xiao Lan Cai
Keyword(s):  
Mechanical Properties ◽  
Ball Milling ◽  
Milling Time ◽  
Aluminum Matrix ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Energy Ball ◽  
Rotary Speed

CNT-reinforced aluminum matrix composites was produced by high-energy ball milling, the effect of rotary speed and milling time on the particle size distribution,the density and hardness of CNT-aluminum matrix composites were studied,it was observed that the rotary speed and milling time have an important effect on the mechanical properties of the CNT-aluminum matrix composites.

The Influence of High-Energy Ball Milling and Sintering Process on the Microstructure and Mechanical Properties of Al-Ni-Y-Co-La Alloy

2013 ◽  
Vol 745-746 ◽  
pp. 281-285
Author(s):  
Y.B. Yuan ◽  
Rui Xiao Zheng ◽  
Su Jing Ge ◽  
Han Yang ◽  
Chao Li Ma
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Ball Milling ◽  
Amorphous Materials ◽  
Volume Fraction ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Process Conditions ◽  
Bulk Alloy ◽  
Energy Ball

Al86Ni7Y4.5Co1La1.5 (at.%) alloy powder was produced by argon gas atomization process. After high-energy ball milling, the powder was consolidated and extruded by using vacuum hot press sintering under different process conditions, sintering temperature, extrusion pressure, sintering time, etc.. The microstructure and morphology of the powder and consolidated bulk alloy were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The phase transformation of the powder was investigated by differential scanning calorimetry (DSC). Mechanical properties of the consolidated bulk alloy were examined. The results showed that as the milling time increase, the volume fraction of amorphous materials and the hardness and yield strength of the bulk alloy were obvious improved.

Mechanical properties of (TixW1−x)C–Co cermet prepared by carbothermal reduction of high energy ball milled TiO2–WO3–C

2017 ◽  
Vol 43 (2) ◽  
pp. 1943-1947 ◽  
Author(s):  
Hanjung Kwon ◽  
Sun-A. Jung ◽  
Chang–Yul Suh ◽  
Wonbaek Kim
Keyword(s):  
Mechanical Properties ◽  
Carbothermal Reduction ◽  
High Energy ◽  
Energy Ball
Sign in / Sign up

Export Citation Format

Share Document