scholarly journals Towards a direct band gap group IV Ge-based material

2019 ◽  
Vol 92 ◽  
pp. 39-46 ◽  
Author(s):  
Tuan T. Tran ◽  
Jay Mathews ◽  
J.S. Williams
2005 ◽  
Vol 891 ◽  
Author(s):  
John Tolle ◽  
Radek Roucka ◽  
Vijay D'Costa ◽  
Jose Menendez ◽  
Andrew Chizmeshya ◽  
...  

ABSTRACTWe report growth and properties of GeSn and SiGeSn alloys on Si (100). These materials are prepared using a novel CVD approach based on reactions of Si-Ge hydrides and SnD4. High quality GeSn films with Sn contents up to 20%, and strain free microstructures have been obtained. The lattice mismatch between the films and Si is relieved by Lomer edge dislocations located at the interface. This material is of interest due to the predicted cross-over to a direct gap semiconductor for moderate Sn concentrations. We find that the direct band gap, and, consequently, the main absorption edge, shifts monotonically to lower energies as the Sn concentration is increased. The compositional dependence of the direct band gap shows a strong bowing, such that the direct band gap is reduced to 0.4 eV (from 0.8 eV for pure Ge) for a concentration of 14% Sn. The ternary SiGeSn alloy has been grown for the first time on GeSn buffer layers. This material opens up entirely new opportunities for strain and band gap engineering using group-IV materials via decoupling of strain and composition. Our SiGeSn layers have lattice constants above and below that of pure Ge, and depending on the thickness and composition of the underlying buffer layer they can be grown relaxed, with compressive, or with tensile strain. In addition to acting as a buffer layer for the growth of SiGeSn, we have found that GeSn can act as a template for the subsequent growth of a variety of materials, including III-V semiconductors.


2015 ◽  
Vol 17 (33) ◽  
pp. 21605-21610 ◽  
Author(s):  
Zhen Zhu ◽  
Jiamin Xiao ◽  
Haibin Sun ◽  
Yue Hu ◽  
Ronggen Cao ◽  
...  

Obtaining the value of the band gap and the composition of an indirect–direct band gap transition point for group-IV semiconductor alloys by an efficient and reliable method.


2013 ◽  
Vol 652-654 ◽  
pp. 527-531 ◽  
Author(s):  
A.N. Alias ◽  
T.I. Tunku Kudin ◽  
Z.M. Zabidi ◽  
M.K. Harun ◽  
Ab Malik Marwan Ali ◽  
...  

The optical absorption spectra of blended poly (N-carbazole) (PVK) with polyvinylpyrrolidone (PVP) in various compositions are investigated. A doctor blade technique was used to coat the blended polymer on a quartz substrate. The electronic parameters such as absorption edge (Ee), allowed direct band gap (Ed), allowed indirect band gap (Ei), Urbach edge (Eu) and steepness parameter (γ) were calculated using Tauc/Davis-Mott Model. The results reveal that the Ee, Ed and Ei increase with increasing of PVP ratio. There also have variation changing in Urbach energy and steepness parameter.


Sign in / Sign up

Export Citation Format

Share Document