A new straight-line reserve evaluation method for water bearing gas reservoirs with high water production rate

2021 ◽  
Vol 196 ◽  
pp. 107808
Author(s):  
Juntai Shi ◽  
Jiayi Wu ◽  
Ming Lv ◽  
Qian Li ◽  
Chengyuan Liu ◽  
...  
2020 ◽  
Vol 8 (41) ◽  
pp. 21771-21779
Author(s):  
Jiaxiang Ma ◽  
Yu Han ◽  
Ying Xu ◽  
Tao Zhang ◽  
Jingjing Zhang ◽  
...  

An integrated photo-electro-thermal evaporation system uses a simple preparation process successfully achieves the improvement of water production rate in the day and continuous water evaporation at night.


2020 ◽  
Author(s):  
Youssef Moulane ◽  
Emmanuel Jehin ◽  
Francisco José Pozuelos ◽  
Jean Manfroid ◽  
Zouhair Benkhaldoun ◽  
...  

<p>Long Period Comets (LPCs) have orbital periods longer than 200 years, perturbed from their resting place in the Oort cloud. Such gravitational influences may send these icy bodies on a path towards the center of the Solar system in highly elliptical orbits. In this work, we present the activity and composition evolution of several LPCs observed with both TRAPPIST telescopes (TS and TN) during the period of 2019-2020. These comets include: C/2017 T2 (PANSTARRS), C/2018 Y1 (Iwamoto), C/2018 W2 (Africano), and disintegrated comet C/2019 Y4 (ATLAS). We monitored the OH, NH, CN, C<sub>2</sub> and C<sub>3</sub> production rates evolution and their chemical mixing ratios with respect to their distances to the Sun as well as the dust production rate proxy (A(0)fp) during the journey of these comets into the inner Solar system.</p> <p><strong>C/2017 T2 (PANSTARRS)</strong> is a very bright comet which was discovered on October 2, 2017 when it was 9.20 au from the Sun. We started observing this comet with TS at the beginning of August 2019 when it was at 3.70 au. The comet made the closest approach to the Earth on December 28, 2019 at a distance of 1.52 au and it passed the perihelion on May 4, 2020 at 1.61 au. The water production rate of the comet reached a maximum of (4,27±0,12)10<sup>28 </sup>molecules/s and its dust production rate (A(0)fp(RC)) also reached the peak of 5110±25 cm on January 26, 2020, when the comet was at 2.08 au from the Sun (-100 days pre-perihelion). At the time of writing, we still monitoring the activity of the comet with TN at heliocentric distance of 1.70 au. Our observations show that C/2017 T2 is a normal LPC.</p> <p><strong>C/2018 Y1 (Iwamoto)</strong> is a nearly parabolic comet with a retrograde orbit discovered on December 18, 2018 by Japanese amateur astronomer Masayuki Iwamoto. We monitored the activity and composition of Iwamoto with both TN and TS telescopes from January to March 2019. The comet reached its maximum activity on January 29, 2019 when it was at 1.29 au from the Sun (-8 days pre-perihelion) with Q(H<sub>2</sub>O)=(1,68±0,05)10<sup>28 </sup>molecules/s and A(0)fp(RC)= 92±5 cm. These measurements show that it was a dust-poor comet compared to the typical LPCs.</p> <p><strong>C/2018 W2 (Africano) </strong>was discovered on November 27, 2018 at Mount Lemmon Survey with a visual magnitude of 20. The comet reached its perihelion on September 6, 2019 when it was at 1.45 au from the Sun. We monitored the comet from July 2019 (r<sub>h</sub>=1.71 au) to January 2020 (r<sub>h</sub>=2.18 au) with both TN and TS telescopes. The comet reached its maximum activity on September 21, 15 days post-perihelion (r<sub>h</sub>=1.47 au) with Q(H<sub>2</sub>O)=(0,40±0,03)10<sup>28 </sup>molecules/s.</p> <p><strong>C/2019 Y4 (ATLAS)</strong> is a comet with a nearly parabolic orbit discovered on December 18, 2019 by the ATLAS survey. We started to follow its activity and composition with broad- and narrow-band filters with the TN telescope on February 22, 2019 when it was at 1.32 au from the Sun until May 3, 2020 when the comet was at a heliocentric distance of 0.90 au inbound. The comet activity reached a maximum on March 22 (r<sub>h</sub>=1.65 au) 70 days before perihelion. At that time, the water-production rate reached (1,53±0,04)10<sup>28 </sup>molecules/s and the A(0)fp reached (1096±14) cm in the red filter. After that, the comet began to fade and disintegrated into several fragments.</p>


2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Guangfu Cao ◽  
Qingfen Ma ◽  
Jingru Li ◽  
Shenghui Wang ◽  
Chengpeng Wang ◽  
...  

A Bubbling and Vacuum-enhanced direct contact membrane distillation (BVDCMD) is proposed to improve the water production rate of the direct contact membrane distillation (DCMD-)based seawater desalination process. Its heat and mass transfer mechanism are theoretically analyzed, and a CFD model is established, which is verified by the published data. Four types of the noncondensable gas, “O2,” “air,” “N2,” and “H2,” are adopted as the bubbling gas, and their process enhancements under different pressure of permeate side, temperature, and NaCl concentration of feed side and flow velocities are investigated. The results show that the permeate flux increased remarkably with the decrease in the viscosity of the bubbling gas, and hence, “H2” is the best option for the bubbling gas, with the permeate flux being enhanced by 144.11% and the effective heat consumption being increased by 20.81% on average. The effective water production rate of BVDCMD is predicted to be 42.38% more than that of DCMD, proving its feasibility in the seawater desalination.


2021 ◽  
Vol 73 (09) ◽  
pp. 60-61
Author(s):  
Chris Carpenter

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 200957, “Application of Specially Designed Polymers in High-Water-Cut Wells: A Holistic Well-Intervention Technology Applied in Umm Gudair Field, Kuwait,” by Ali Abdullah Al-Azmi, SPE, Thanyan Ahmed Al-Yaqout, and Dalal Yousef Al-Jutaili, Kuwait Oil Company, et al., prepared for the 2020 SPE Trinidad and Tobago Section Energy Resources Conference, originally scheduled to be held in Port of Spain, Trinidad and Tobago, 29 June–1 July. The paper has not been peer reviewed. A significant challenge faced in the mature Umm Gudair (UG) field is assurance of hydrocarbon flow through highly water-prone intervals. The complete paper discusses the field implementation of a downhole chemical methodology that has positively affected overall productivity. The treatment was highly modified to address the challenges of electrical-submersible-pump (ESP)-driven well operations, technical difficulties posed by the formation, high-stakes economics, and high water potential from these formations. Field Background and Challenge The UG field is one of the major oil fields in Kuwait (Fig. 1). The Minagish oolite (MO) reservoir is the main oil producer, contributing more than 95% of current production in the UG field. However, water cut has been increasing (approximately 65% at the time of writing). The increasing water cut in the reservoir is posing a major challenge to maintaining the oil-production rate because of the higher mobility of water compared with that of oil. The natural water aquifer support in the reservoir that underlies the oil column extends across the reservoir and is rising continuously. This has led to a decline in the oil-production rate and has prevented oil-producing zones from contributing effectively. The reservoir experiences water-coning phenomena, especially in high-permeability zones. Oil viscosity ranges from 2 to 8 cp, and hydrogen sulfide and carbon dioxide levels are 1.5 and 4%, respectively. During recent years, water production has increased rapidly in wells because of highly conductive, thick, clean carbonate formations with low structural dip as well as some stratified formations. Field production may be constrained by the capacity of the surface facilities; therefore, increased water production has different effects on field operations. The average cost of handling produced water is estimated to be between $5 billion and $10 billion in the US and approximately $40 billion globally. These volumes often are so large that even incremental modifications can have major financial effects. For example, the lift-ing cost of one barrel of oil doubles when water cut reaches 50%, increases fivefold at 80% water cut, and increases twenty-fold at 95% water cut.


Icarus ◽  
2013 ◽  
Vol 225 (1) ◽  
pp. 740-748 ◽  
Author(s):  
M.R. Combi ◽  
J.T.T. Mäkinen ◽  
J.-L. Bertaux ◽  
E. Quémerais ◽  
S. Ferron ◽  
...  

2014 ◽  
Vol 997 ◽  
pp. 770-776
Author(s):  
Feng Long Xie ◽  
Jian Jun Shen ◽  
Jiang Liu

Based on the pilot test, the feasibility of E lectrosorption Technology of industrial sewage treatment plant was studied. The result s show that, when the equipment w ater flow and electrode voltage appropriate, in the sewage plant industrial average conductivity row is 3277μS/cm, 4072μS/cm, averaged desalination rate is 74.8%, averaged water production rate is about 75.5%, average consu mption water of a ton is 2.46kW•H. E lectrosorption technology is g ood removal effect of salinity, chloride and total hardness , and water production rate is high, simple operation, can be used for desalination of industrial recyclin wastewater .


Sign in / Sign up

Export Citation Format

Share Document