Spatio-temporal adaptive indoor positioning using an ensemble approach

2017 ◽  
Vol 41 ◽  
pp. 319-332 ◽  
Author(s):  
Taisei Hayashi ◽  
Daisuke Taniuchi ◽  
Joseph Korpela ◽  
Takuya Maekawa
Author(s):  
Siavash Pouryousefi-Markhali ◽  
Annie Poulin ◽  
Marie-Amélie Boucher

Quantifying the uncertainty linked to the degree to which the spatio-temporal variability of the catchment descriptors (CDs), and consequently calibration parameters (CPs), represented in the distributed hydrology models and its impacts on the simulation of flooding events is the main objective of this paper. Here, we introduce a methodology based on ensemble approach principles to characterize the uncertainties of spatio-temporal variations. We use two distributed hydrological models (WaSiM and Hydrotel) and six catchments with different sizes and characteristics, located in southern Quebec, to address this objective. We calibrate the models across four spatial (100, 250, 500, 1000 $m^2$) and two temporal (3 hours and 24 hours) resolutions. Afterwards, all combinations of CDs-CPs pairs are fed to the hydrological models to create an ensemble of simulations for characterizing the uncertainty related to the spatial resolution of the modeling, for each catchment. The catchments are further grouped into large ($>1000 km^2$), medium (between 500 and 1000 $km^2$) and small ($<500km^2$) to examine multiple hypotheses. The ensemble approach shows a significant degree of uncertainty (over $100\%$ error for estimation of extreme streamflow) linked to the spatial discretization of the modeling. Regarding the role of catchment descriptors, results show that first, there is no meaningful link between the uncertainty of the spatial discretization and catchment size, as spatio-temporal discretization uncertainty can be seen across different catchment sizes. Second, the temporal scale plays only a minor role in determining the uncertainty related to spatial discretization. Third, the more physically representative a model is, the more sensitive it is to changes in spatial resolution. Finally, the uncertainty related to model parameters is dominant larger than that of catchment descriptors for most of the catchments. Yet, there are exceptions for which a change in spatio-temporal resolution can alter the distribution of state and flux variables, change the hydrologic response of the catchments, and cause large uncertainties.


Author(s):  
Marcelo Orenes-Vera ◽  
Fernando Terroso-Saenz ◽  
Mercedes Valdes-Vela

The Internet of Things (IoT) has recently been applied in the domain of cultural exhibition enabling the cultural sites to provide more personal and proactive experiences to their visitors. To come up with valuable services, several solutions to analyze the spatio-temporal trajectories of visitors have been put forward. However, they neither consider the inherent uncertainty of the underlying indoor positioning technologies – Bluetooth Low Energy (BLE), RFID, etc. – nor other visitors’ features apart from the spatio-temporal ones (e.g. the level of interaction with the museum displays). For that reason, the present work introduces RECITE, a framework to classify trajectories representing visitors’ actions that copes with the aforementioned limitations of existing solutions. Firstly, RECITE states a novel mapping process for a BLE-based indoor positioning system to accurately detect the visitors’ locations. On top of this mechanism, RECITE includes an ensemble of fuzzy rule classifiers able to tag the visitors’ ongoing trajectories in real time considering both spatio-temporal and other behavioural factors. Finally, the framework has been evaluated in a case of use scenario showing quite promising results.


2020 ◽  
Author(s):  
Kevin Bellinguer ◽  
Robin Girard ◽  
Guillaume Bontron ◽  
Georges Kariniotakis

&lt;p&gt;&lt;strong&gt;Abstract&lt;/strong&gt;&lt;/p&gt;&lt;p&gt;Over the past years, environmental concerns have played a key role in the development of renewable energy sources (RES). In Europe, the installed capacity of photovoltaic (PV) has increased from around 10 GW in 2008 to nearly 119 GW in 2018 [1]. Due to this high penetration rate and the intermittent nature of RES, several challenges appear related to the economic and secure operation of a power system. To overcome these challenges, it is necessary to develop reliable forecasts of RES, and namely of PV production, for the next hours to days to adjust production planning, while intra-hourly forecasts may contribute to optimize operation of storage units coupled to RES plants.&lt;/p&gt;&lt;p&gt;The aim of this paper is to present a novel spatio-temporal (ST) spot forecasting approach able to use multiple heterogeneous sources of data as inputs to forecast short-term PV production (i.e. from 15 minutes up to a day ahead).&lt;/p&gt;&lt;p&gt;First, we consider measured production data from nearby power plants as input to forecast the output of a specific PV plant. These data permit to exploit the correlation between the production data of spatially distributed PV sites. The classical ST approach in the literature, based only on this source of data [2], permits to improve predictability for the next few minutes up to 6 hours ahead.&lt;/p&gt;&lt;p&gt;Then, we extend the model by the use of satellite images (i.e. global horizontal irradiance (GHI)) which provide meaningful spatial information at a larger extent.&lt;/p&gt;&lt;p&gt;Finally, we consider Numerical Weather Predictions (NWPs) as input, which permit to extend the applicability of the model to day-ahead lead times, so that, overall, the resulting model covers efficiently horizons ranging from a few minutes to day ahead.&lt;/p&gt;&lt;p&gt;The spatio-temporal relationships being dependent on the particular meteorological situation of the day at hand, we apply an analog ensemble approach, to condition the learning process with historical observations corresponding to similar meteorological situation. We used the analogue approach to select a subset of similar historical situations over which a dynamical calibration of the forecasted model is done, as it was for example suggested by [3,4]. In our paper we extend the analogs ensemble approach by considering geographically distributed observations of the physical variables of interest (as suggested by [4] for hydrological issues) rather than only those at the level of the PV plant.&lt;/p&gt;&lt;p&gt;The performance of the proposed ST model with heterogeneous inputs is compared with reference models and advanced ones such as the Random Forest model. Historical production data collected from 9 PV plants of CNR are considered. The power units, located in the South-East France, exhibit relevant spatial correlations which make them suitable for the proposed ST model.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;&lt;strong&gt;References&lt;/strong&gt;&lt;/p&gt;&lt;ul&gt;&lt;li&gt;[1] IRENA - https://www.irena.org/Statistics/Download-Data&lt;/li&gt; &lt;li&gt;[2] Agoua, Girard, Kariniotakis. Short-Term Spatio-Temporal Forecasting of Photovoltaic Power Production. IEEE Transactions on Sustainable Energy , IEEE, 2018, 9 (2), pp. 538 - 546. https://doi.org/10.1109/TSTE.2017.2747765&lt;/li&gt; &lt;li&gt;[3] Alessandrini, Delle Monache, Sperati, Cervone. An analog ensemble for short-term probabilistic solar power forecast. Applied Energy, 2015. https://doi.org/10.1016/j.apenergy.2015.08.011&lt;/li&gt; &lt;li&gt;[4] Bellier, Bontron, Zin. Using meteorological analogues for reordering postprocessed precipitation ensembles in hydrological forecasting. Water Resources Research, 2017. https://doi.org/10.1002/2017wr021245&lt;/li&gt; &lt;/ul&gt;


2020 ◽  
Vol 79 (37-38) ◽  
pp. 28393-28409
Author(s):  
Nirbhay Kumar Tagore ◽  
Pratik Chattopadhyay ◽  
Lipo Wang

2012 ◽  
Vol 16 (4) ◽  
pp. 564-567 ◽  
Author(s):  
Shih-Hau Fang ◽  
Chu-Hsuan Wang ◽  
Ting-Yu Huang ◽  
Chin-Huang Yang ◽  
Yung-Sheng Chen

2005 ◽  
Vol 41 ◽  
pp. 15-30 ◽  
Author(s):  
Helen C. Ardley ◽  
Philip A. Robinson

The selectivity of the ubiquitin–26 S proteasome system (UPS) for a particular substrate protein relies on the interaction between a ubiquitin-conjugating enzyme (E2, of which a cell contains relatively few) and a ubiquitin–protein ligase (E3, of which there are possibly hundreds). Post-translational modifications of the protein substrate, such as phosphorylation or hydroxylation, are often required prior to its selection. In this way, the precise spatio-temporal targeting and degradation of a given substrate can be achieved. The E3s are a large, diverse group of proteins, characterized by one of several defining motifs. These include a HECT (homologous to E6-associated protein C-terminus), RING (really interesting new gene) or U-box (a modified RING motif without the full complement of Zn2+-binding ligands) domain. Whereas HECT E3s have a direct role in catalysis during ubiquitination, RING and U-box E3s facilitate protein ubiquitination. These latter two E3 types act as adaptor-like molecules. They bring an E2 and a substrate into sufficiently close proximity to promote the substrate's ubiquitination. Although many RING-type E3s, such as MDM2 (murine double minute clone 2 oncoprotein) and c-Cbl, can apparently act alone, others are found as components of much larger multi-protein complexes, such as the anaphase-promoting complex. Taken together, these multifaceted properties and interactions enable E3s to provide a powerful, and specific, mechanism for protein clearance within all cells of eukaryotic organisms. The importance of E3s is highlighted by the number of normal cellular processes they regulate, and the number of diseases associated with their loss of function or inappropriate targeting.


2019 ◽  
Vol 47 (6) ◽  
pp. 1733-1747 ◽  
Author(s):  
Christina Klausen ◽  
Fabian Kaiser ◽  
Birthe Stüven ◽  
Jan N. Hansen ◽  
Dagmar Wachten

The second messenger 3′,5′-cyclic nucleoside adenosine monophosphate (cAMP) plays a key role in signal transduction across prokaryotes and eukaryotes. Cyclic AMP signaling is compartmentalized into microdomains to fulfil specific functions. To define the function of cAMP within these microdomains, signaling needs to be analyzed with spatio-temporal precision. To this end, optogenetic approaches and genetically encoded fluorescent biosensors are particularly well suited. Synthesis and hydrolysis of cAMP can be directly manipulated by photoactivated adenylyl cyclases (PACs) and light-regulated phosphodiesterases (PDEs), respectively. In addition, many biosensors have been designed to spatially and temporarily resolve cAMP dynamics in the cell. This review provides an overview about optogenetic tools and biosensors to shed light on the subcellular organization of cAMP signaling.


Sign in / Sign up

Export Citation Format

Share Document