Mechanical properties of preferentially aligned short pineapple leaf fiber reinforced thermoplastic elastomer: Effects of fiber content and matrix orientation

2014 ◽  
Vol 37 ◽  
pp. 36-44 ◽  
Author(s):  
Asama Kalapakdee ◽  
Taweechai Amornsakchai
Keyword(s):  
Mechanical Properties ◽  
Thermoplastic Elastomer ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Pineapple Leaf Fiber ◽  
Matrix Orientation ◽  
Leaf Fiber

Improving the mechanical properties of short pineapple leaf fiber reinforced natural rubber by blending with acrylonitrile butadiene rubber

2017 ◽  
Vol 57 ◽  
pp. 94-100 ◽  
Author(s):  
Nuttapong Hariwongsanupab ◽  
Sombat Thanawan ◽  
Taweechai Amornsakchai ◽  
Marie-France Vallat ◽  
Karine Mougin
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Butadiene Rubber ◽  
Fiber Reinforced ◽  
Acrylonitrile Butadiene Rubber ◽  
Pineapple Leaf Fiber ◽  
Leaf Fiber

scholarly journals Application of Natural Plant Fibers in Cement-Based Composites and the Influence on Mechanical Properties and Mass Transport

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3498 ◽  
Author(s):  
Kaiyue Zhao ◽  
Shanbin Xue ◽  
Peng Zhang ◽  
Yupeng Tian ◽  
Peibing Li
Keyword(s):  
Mechanical Properties ◽  
Elasticity Modulus ◽  
Fiber Content ◽  
Modulus Of Rupture ◽  
Chloride Diffusion ◽  
Ramie Fiber ◽  
Plant Fibers ◽  
Natural Plant ◽  
Pineapple Leaf Fiber ◽  
Leaf Fiber

Recently, there is ongoing interest in the use of natural plant fibers as alternatives for conventional reinforcements in cementitious composites. The use of natural plant fibers makes engineering work more sustainable, since they are renewable, biodegradable, energy-efficient, and non-toxic raw materials. In this contribution, a comprehensive experimental program was undertaken to determine the influence of pineapple leaf fiber and ramie fiber on the mechanical properties and mass transport of cement-based composites. The compressive strength, tensile strength, modulus of elasticity, modulus of rupture, fracture energy, flexural toughness, coefficient of capillary water absorption, and chloride diffusion were measured. Natural plant fiber-reinforced cement-based composites (NPFRCCs) containing pineapple leaf fiber and ramie fiber, as compared to the plain control, exhibited a slight reduction in compressive strength and a considerable improvement in tensile strength, modulus of elasticity, modulus of rupture, and flexural toughness; the enhancement was remarkable with a higher fiber content. The coefficient of capillary absorption and chloride diffusion of NPFRCCs were significantly larger than the plain control, and the difference was evident with the increase in fiber content. The present study suggests that the specimen with 2% pineapple leaf fiber content can be used in normal environments due to its superior mechanical properties. However, one should be careful when using the material in marine environments.

Mechanical properties and water absorption of kenaf/pineapple leaf fiber‐reinforced polypropylene hybrid composites

2020 ◽  
Vol 41 (4) ◽  
pp. 1255-1264 ◽  
Author(s):  
Ng Lin Feng ◽  
Sivakumar Dhar Malingam ◽  
Chen Wei Ping ◽  
Nadlene Razali
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Hybrid Composites ◽  
Fiber Reinforced ◽  
Pineapple Leaf Fiber ◽  
Leaf Fiber

Micro-mechanical analysis of the pineapple-reinforced polymeric composite by the inclusion of pineapple leaf particulates

2021 ◽  
pp. 146442072199085
Author(s):  
Abir Saha ◽  
Santosh Kumar ◽  
Divya Zindani ◽  
Sumit Bhowmik
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Polymeric Composites ◽  
Fiber Reinforced ◽  
Plane Shear ◽  
Pineapple Leaf Fiber ◽  
Outer Plane ◽  
Leaf Fiber ◽  
Element Method

The present study is focused on investigating the effect of the micro-mechanical properties of the natural fiber- (pineapple leaf fiber) reinforced polymeric composites by the addition of pineapple leaf micro-particulates. For the investigation, a two-step approach has been used. In the first step, finite element method-based analysis has been used to characterize the tensile and shear properties of the pineapple leaf fiber-reinforced polymeric composites (FRP) and pineapple paticulate-reinforced polymeric composites (PRC), and the adopted finite element method-based analysis has been validated through the experimental approach. In the second step, the validated finite element method-based analysis has been used to characterize the micro-mechanical properties of the hybrid fiber-reinforced polymeric composites (HFRP) fabricated using the pineapple leaf micro-particle embedded epoxy as a matrix material and the pineapple leaf fiber has been used as reinforcing material. It has been observed through the analysis that the micro-mechanical properties of HFRP were superior to that of FRP. There has been a 10.16% increment in Young’s modulus in the longitudinal direction and a 26.36% increment in Young’s modulus in the transverse direction for HFRP over FRP. Further, a 9.91% increment for in-plane shear modulus and 26.17% increment in outer-plane shear modulus have been observed for HFRP in comparison to FRP. These results suggest that pineapple leaf particulates are good reinforcing materials to enhance the transverse direction and outer plane micro-mechanical properties of the fiber-reinforced composite.

Comparative Study of Jute, Okra and Pineapple Leaf Fiber Reinforced Polypropylene Based Composite

2019 ◽  
Vol 1155 ◽  
pp. 29-40
Author(s):  
Kamrun N. Keya ◽  
Nasrin A. Kona ◽  
Ruhul A. Khan
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Interfacial Properties ◽  
Compression Molding ◽  
Jute Fiber ◽  
Fiber Reinforced ◽  
Elongation At Break ◽  
Pineapple Leaf Fiber ◽  
Okra Fiber ◽  
Leaf Fiber

In this experimental studies, three types of fabric such as Jute, Okra and Pineapple Leaf Fiber (PALF) were selected and matrix material such as polypropylene (PP) was selected to manufacture composites. Jute/PP, Okra/PP, and PALF/PP based composites were prepared successfully by a conventional compression molding technique. The objective of this study is to compare the mechanical such as tensile strength (TS), tensile modulus (TM), bending strength (BS), bending modulus (BM), elongation at break (Eb%) and interfacial properties of the composites. Jute fiber (hessian cloth)-reinforced polypropylene matrix composites (45wt% fiber) were fabricated by compression molding. TS, TM, BS, BM, and IS of the composites were found to be 45 MPa, 2.2 GPa, 54 MPa, 4.1 GPa, and 16 kJ/m2, respectively. Then Okra and PALF fiber reinforced polypropylene-based composites (45 wt% fiber) were fabricated and the mechanical properties were compared with those of the jute-based composites. The result revealed that mechanical properties of PALF composite higher than jute and Okra fiber reinforced composites. Water absorption and elongation percentage at break showed different scenario and it was noticed from the experimental study that water absorption and elongation at break (%) of jute fabric was higher than other composites. Fracture sides of the composites were studied by scanning electron microscope (SEM), and the results revealed poor fiber-matrix adhesion for jute fiber-based composites compared to that of the other fiber-based composites (OF/PP and PALF/PP). KEY WORDS: Polypropylene, Jute Fiber, Okra Fiber, Pineapple Fiber, Mechanical Properties, Interfacial Properties, Composites. *Corresponding Address: [email protected]

Study on mechanical properties of jute/pineapple leaf fiber reinforced polymer (FRP) composite

2019 ◽  
Author(s):  
M. Indra Reddy ◽  
Ranjeet Kumar Sahu ◽  
M. Anil Kumar ◽  
Ch. Rama Bhadri Raju
Keyword(s):  
Mechanical Properties ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Pineapple Leaf Fiber ◽  
Frp Composite ◽  
Reinforced Polymer ◽  
Leaf Fiber
Sign in / Sign up

Export Citation Format

Share Document