The photocatalytic hydrogen formation and NO2− oxidation on the hetero-junction Ag/NiFe2O4 prepared by chemical route

2020 ◽  
Vol 145 ◽  
pp. 2615-2620 ◽  
Author(s):  
Z. Boukhemikhem ◽  
R. Brahimi ◽  
G. Rekhila ◽  
G. Fortas ◽  
L. Boudjellal ◽  
...  
Author(s):  
Pratibha L. Gai ◽  
M. A. Saltzberg ◽  
L.G. Hanna ◽  
S.C. Winchester

Silica based ceramics are some of the most fundamental in crystal chemistry. The cristobalite form of silica has two modifications, α (low temperature, tetragonal form) and β (high temperature, cubic form). This paper describes our structural studies of unusual chemically stabilized cristobalite (CSC) material, a room temperature silica-based ceramic containing small amounts of dopants, prepared by a wet chemical route. It displays many of the structural charatcteristics of the high temperature β-cristobalite (∼270°C), but does not undergo phase inversion to α-cristobalite upon cooling. The Structure of α-cristobalite is well established, but that of β is not yet fully understood.Compositions with varying Ca/Al ratio and substitutions in cristobalite were prepared in the series, CaO:Al2O3:SiO2 : 3-x: x : 40, with x= 0-3. For CSC, a clear sol was prepared from Du Pont colloidal silica, Ludox AS-40®, aluminium nitrate nonahydrate, and calcium nitrate hexahydrate in proportions to form a final composition 1:2:40 composition.


2019 ◽  
Vol 9 (3) ◽  
pp. 362-370 ◽  
Author(s):  
D. Vaya ◽  
Meena ◽  
B.K. Das

Background: The properties of the material are altered when material size shifted towards nano-regime. This feature could be used for wastewater treatment process using model pollutant such as dyes. Recently, nanoparticles are synthesized by a green chemical route using different capping agents. This is the reason we adopt starch as green capping agent along with sol-gel method. Objective: To synthesize cobalt oxide nanoparticles by green chemical route and utilized it in degradation of dyes. Methods: Synthesis of cobalt oxide nanoparticles by sol-gel method using starch as a capping agent. The characteristics of surface modifications were investigated by UV-VIS, TEM, SEM, XRD and FTIR techniques. Results: Cobalt oxide nanoparticles synthesized and inhibited photocatalytic activity. Conclusion: Deactivation of photocatalytic activity due to complex nature of starch. This property can be used elsewhere as in light shielding applications to coat and protect surfaces in order to keep them cool and safe from damage as in the painting of vehicles, roofs, buildings, water tanks, etc.


1991 ◽  
Vol 340 (10) ◽  
pp. 621-626 ◽  
Author(s):  
Frank Wien ◽  
Gerd Gund ◽  
Werner Weisweiler

2021 ◽  
Vol 4 (4) ◽  
pp. 3748-3756
Author(s):  
Christopher J. Perez ◽  
Zhijie Chen ◽  
Willie B. Beeson ◽  
Sevan Chanakian ◽  
Kai Liu ◽  
...  

2021 ◽  
Vol 865 ◽  
pp. 158937
Author(s):  
S.K. Satpathy ◽  
U.K. Panigrahi ◽  
S.K. Panda ◽  
R. Biswal ◽  
W. Luyten ◽  
...  

2021 ◽  
Vol 602 ◽  
pp. 412574
Author(s):  
Tahira Akhter ◽  
Muhammad Asif Yousuf ◽  
Muhammad Asghar ◽  
Ibrahim A. Alsafari ◽  
Akmal Jamil ◽  
...  

1994 ◽  
Vol 17 (6) ◽  
pp. 967-975 ◽  
Author(s):  
P Pramanik ◽  
Amita Pathak
Keyword(s):  

2021 ◽  
Vol 3 (7) ◽  
Author(s):  
A. Krishnamoorthy ◽  
P. Sakthivel ◽  
I. Devadoss ◽  
V. M. Anitha Rajathi

AbstractIn this work, the Cd0.9-xZn0.1BixS QDs with different compositions of Bi3+ ions (0 ≤ x ≤ 0.05) were synthesized using a facile chemical route. The prepared QDs were characterized for analyzing the structural, morphological, elemental, optical, band gap, photoluminescence and electrochemical properties. XRD results confirmed that the Cd0.9-xZn0.1BixS QDs have a cubic structure. The mean crystallite size was increased from ~ 2 to ~ 5 nm for the increase of Bi3+ ions concentration. The optical transmittance behavior was decreased with increasing Bi3+ ions. The scanning electron microscope images showed that the prepared QDs possessed agglomerated morphology and the EDAX confirmed the presence of doped elements as per stoichiometry ratio. The optical band gap was slightly blue-shifted for initial substitution (Bi3+  = 1%) of Bi3+ ions and red-shifted for further increase of Bi3+ compositions. The optical band gap was ranged between 3.76 and 4.0 eV. High intense red emission was received for Bi3+ (1%) doped Zn:CdS QDs. The red emission peaks were shifted to a higher wavelength side due to the addition of Bi3+ ions. The PL emission on UV-region was raised for Bi3+ (1%) and it was diminished. Further, a violet (422 nm) and blue (460 nm) emission were received for Bi3+ ions doping. The cyclic voltammetry analysis showed that Bi3+ (0%) possessed better electrical properties than other compositions of Bi3+ ions.


Sign in / Sign up

Export Citation Format

Share Document