An evaluation method for CFD simulations is presented, which allows an in-depth analysis of different loss mechanisms applying the approach of entropy creation proposed by Denton. The entropy creation within each single mesh element is determined based on the entropy flux through the cell faces and therefore the locations, where losses occur, can be identified clearly. By using unique features of the different loss mechanisms present in low pressure steam turbines, the losses are categorized into boundary layer, wake mixing and shock losses as well as thermodynamic wetness losses.
The suitability of the evaluation method is demonstrated by means of steady state CFD simulations of the flow through a generic last stage of a low pressure steam turbine. The simulations have been performed on streamtubes extracted from three-dimensional simulations representing the flow at 10 % span. The impact of non-equilibrium steam effects on the overall loss composition of the stator passage is investigated by comparing the results to an equilibrium steam simulation. It is shown, that the boundary layer losses for the investigated case are of similar magnitude, but the shock and wake losses exhibit significant differences.